Hi Frank, Without the ability to control the networking devices in your vicinity and setup VLANs, what you're trying to do isn't supported via oVirt.
However, assuming you do have root access to your host, I can suggest a workaround: * Create two dummy interfaces on the host, and give them static IP addresses. For example: 192.168.1.254/24, and 192.168.2.254/24. * Create two networks (Non-VM) called One and Two and attach them to the dummy NICs. * Create VMs with virtual NICs in network One, and VMs with virtual NICs in network Two. You can give them static IP addresses and supply the host's dummy interfaces as gateways, or enable a DHCP server on the host. * Enable routing on the host, and setup the appropriate rules so that he acts as a default gateway for all of the VMs, and that he forwards traffic appropriately between the VM networks. ----- Original Message ----- From: "Frank Wall" <[email protected]> To: [email protected] Sent: Monday, May 13, 2013 2:06:53 PM Subject: Re: [Users] How to add internal networks Hi René, Am 13.05.2013 09:56, schrieb René Koch (ovido): > When using multiple logical networks on 1 physical nic you > will need most likely VLAN tagging, as all vm networks are > configured as a bridge in oVirt. unfortunately, using VLAN tagging is not an option for me, because I'm not the maintainer of the network devices (and my hosting provider won't configure VLANs for me). Is there another way to get multiple networks in oVirt up and running? FYI: The main purpose of these internal networks is a test environment for some VMs. Those VMs should be able to reach each other and to have internet access. Thanks - Frank _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
