Any more info. on this issue?
On Thu, May 30, 2013 at 9:10 AM, Ryan Wilkinson <ryanw...@gmail.com> wrote: > I didn't install double. The one package was the version on the FC17 box > and the other was FC18 box. > > > On Thu, May 30, 2013 at 9:08 AM, Hans de Goede <hdego...@redhat.com>wrote: > >> Hi, >> >> >> On 05/30/2013 04:34 PM, Ryan Wilkinson wrote: >> >>> Yes, I can manually pass it through. Not necessarily looking to use >>> this specific device (usb wifi adaptor) but was just handy. Here is the >>> output: >>> >> >> Hmm, that should work. >> >> I just noticed that in your last mail you mentioned that you've >> virt-viewer installed >> "double". >> >> Can you try doing: >> >> rpm -e --allmatches virt-viewer >> yum install virt-viewer >> >> And see if that fixes things ? >> >> Regards, >> >> Hans >> >> >> >> >>> Bus 001 Device 003: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU >>> 802.11n WLAN Adapter >>> Device Descriptor: >>> bLength 18 >>> bDescriptorType 1 >>> bcdUSB 2.00 >>> bDeviceClass 0 (Defined at Interface level) >>> bDeviceSubClass 0 >>> bDeviceProtocol 0 >>> bMaxPacketSize0 64 >>> idVendor 0x0bda Realtek Semiconductor Corp. >>> idProduct 0x8172 RTL8191SU 802.11n WLAN Adapter >>> bcdDevice 2.00 >>> iManufacturer 1 Manufacturer Realtek >>> iProduct 2 RTL8191S WLAN Adapter >>> iSerial 3 00e04c000001 >>> bNumConfigurations 1 >>> Configuration Descriptor: >>> bLength 9 >>> bDescriptorType 2 >>> wTotalLength 46 >>> bNumInterfaces 1 >>> bConfigurationValue 1 >>> iConfiguration 0 >>> bmAttributes 0x80 >>> (Bus Powered) >>> MaxPower 500mA >>> Interface Descriptor: >>> bLength 9 >>> bDescriptorType 4 >>> bInterfaceNumber 0 >>> bAlternateSetting 0 >>> bNumEndpoints 4 >>> bInterfaceClass 255 Vendor Specific Class >>> bInterfaceSubClass 255 Vendor Specific Subclass >>> bInterfaceProtocol 255 Vendor Specific Protocol >>> iInterface 0 >>> Endpoint Descriptor: >>> bLength 7 >>> bDescriptorType 5 >>> bEndpointAddress 0x83 EP 3 IN >>> bmAttributes 2 >>> Transfer Type Bulk >>> Synch Type None >>> Usage Type Data >>> wMaxPacketSize 0x0200 1x 512 bytes >>> bInterval 0 >>> Endpoint Descriptor: >>> bLength 7 >>> bDescriptorType 5 >>> bEndpointAddress 0x04 EP 4 OUT >>> bmAttributes 2 >>> Transfer Type Bulk >>> Synch Type None >>> Usage Type Data >>> wMaxPacketSize 0x0200 1x 512 bytes >>> bInterval 0 >>> Endpoint Descriptor: >>> bLength 7 >>> bDescriptorType 5 >>> bEndpointAddress 0x06 EP 6 OUT >>> bmAttributes 2 >>> Transfer Type Bulk >>> Synch Type None >>> Usage Type Data >>> wMaxPacketSize 0x0200 1x 512 bytes >>> bInterval 0 >>> Endpoint Descriptor: >>> bLength 7 >>> bDescriptorType 5 >>> bEndpointAddress 0x0d EP 13 OUT >>> bmAttributes 2 >>> Transfer Type Bulk >>> Synch Type None >>> Usage Type Data >>> wMaxPacketSize 0x0200 1x 512 bytes >>> bInterval 0 >>> Device Qualifier (for other device speed): >>> bLength 10 >>> bDescriptorType 6 >>> bcdUSB 2.00 >>> bDeviceClass 0 (Defined at Interface level) >>> bDeviceSubClass 0 >>> bDeviceProtocol 0 >>> bMaxPacketSize0 64 >>> bNumConfigurations 1 >>> Device Status: 0x0000 >>> (Bus Powered) >>> >>> Bus 005 Device 002: ID 2101:020f ActionStar >>> Device Descriptor: >>> bLength 18 >>> bDescriptorType 1 >>> bcdUSB 1.00 >>> bDeviceClass 0 (Defined at Interface level) >>> bDeviceSubClass 0 >>> bDeviceProtocol 0 >>> bMaxPacketSize0 8 >>> idVendor 0x2101 ActionStar >>> idProduct 0x020f >>> bcdDevice 0.01 >>> iManufacturer 0 >>> iProduct 0 >>> iSerial 0 >>> bNumConfigurations 1 >>> Configuration Descriptor: >>> bLength 9 >>> bDescriptorType 2 >>> wTotalLength 59 >>> bNumInterfaces 2 >>> bConfigurationValue 1 >>> iConfiguration 0 >>> bmAttributes 0xa0 >>> (Bus Powered) >>> Remote Wakeup >>> MaxPower 500mA >>> Interface Descriptor: >>> bLength 9 >>> bDescriptorType 4 >>> bInterfaceNumber 0 >>> bAlternateSetting 0 >>> bNumEndpoints 1 >>> bInterfaceClass 3 Human Interface Device >>> bInterfaceSubClass 1 Boot Interface Subclass >>> bInterfaceProtocol 1 Keyboard >>> iInterface 0 >>> HID Device Descriptor: >>> bLength 9 >>> bDescriptorType 33 >>> bcdHID 1.01 >>> bCountryCode 0 Not supported >>> bNumDescriptors 1 >>> bDescriptorType 34 Report >>> wDescriptorLength 63 >>> Report Descriptors: >>> ** UNAVAILABLE ** >>> Endpoint Descriptor: >>> bLength 7 >>> bDescriptorType 5 >>> bEndpointAddress 0x81 EP 1 IN >>> bmAttributes 3 >>> Transfer Type Interrupt >>> Synch Type None >>> Usage Type Data >>> wMaxPacketSize 0x0008 1x 8 bytes >>> bInterval 10 >>> Interface Descriptor: >>> bLength 9 >>> bDescriptorType 4 >>> bInterfaceNumber 1 >>> bAlternateSetting 0 >>> bNumEndpoints 1 >>> bInterfaceClass 3 Human Interface Device >>> bInterfaceSubClass 1 Boot Interface Subclass >>> bInterfaceProtocol 2 Mouse >>> iInterface 0 >>> HID Device Descriptor: >>> bLength 9 >>> bDescriptorType 33 >>> bcdHID 1.01 >>> bCountryCode 0 Not supported >>> bNumDescriptors 1 >>> bDescriptorType 34 Report >>> wDescriptorLength 72 >>> Report Descriptors: >>> ** UNAVAILABLE ** >>> Endpoint Descriptor: >>> bLength 7 >>> bDescriptorType 5 >>> bEndpointAddress 0x82 EP 2 IN >>> bmAttributes 3 >>> Transfer Type Interrupt >>> Synch Type None >>> Usage Type Data >>> wMaxPacketSize 0x0008 1x 8 bytes >>> bInterval 10 >>> Device Status: 0x0002 >>> (Bus Powered) >>> Remote Wakeup Enabled >>> >>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>> Device Descriptor: >>> bLength 18 >>> bDescriptorType 1 >>> bcdUSB 2.00 >>> bDeviceClass 9 Hub >>> bDeviceSubClass 0 Unused >>> bDeviceProtocol 0 Full speed (or root) hub >>> bMaxPacketSize0 64 >>> idVendor 0x1d6b Linux Foundation >>> idProduct 0x0002 2.0 root hub >>> bcdDevice 3.06 >>> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 ehci_hcd >>> iProduct 2 EHCI Host Controller >>> iSerial 1 0000:00:1d.7 >>> bNumConfigurations 1 >>> Configuration Descriptor: >>> bLength 9 >>> bDescriptorType 2 >>> wTotalLength 25 >>> bNumInterfaces 1 >>> bConfigurationValue 1 >>> iConfiguration 0 >>> bmAttributes 0xe0 >>> Self Powered >>> Remote Wakeup >>> MaxPower 0mA >>> Interface Descriptor: >>> bLength 9 >>> bDescriptorType 4 >>> bInterfaceNumber 0 >>> bAlternateSetting 0 >>> bNumEndpoints 1 >>> bInterfaceClass 9 Hub >>> bInterfaceSubClass 0 Unused >>> bInterfaceProtocol 0 Full speed (or root) hub >>> iInterface 0 >>> Endpoint Descriptor: >>> bLength 7 >>> bDescriptorType 5 >>> bEndpointAddress 0x81 EP 1 IN >>> bmAttributes 3 >>> Transfer Type Interrupt >>> Synch Type None >>> Usage Type Data >>> wMaxPacketSize 0x0004 1x 4 bytes >>> bInterval 12 >>> Hub Descriptor: >>> bLength 11 >>> bDescriptorType 41 >>> nNbrPorts 8 >>> wHubCharacteristic 0x000a >>> No power switching (usb 1.0) >>> Per-port overcurrent protection >>> bPwrOn2PwrGood 10 * 2 milli seconds >>> bHubContrCurrent 0 milli Ampere >>> DeviceRemovable 0x00 0x00 >>> PortPwrCtrlMask 0xff 0xff >>> Hub Port Status: >>> Port 1: 0000.0100 power >>> Port 2: 0000.0100 power >>> Port 3: 0000.0100 power >>> Port 4: 0000.0100 power >>> Port 5: 0000.0100 power >>> Port 6: 0000.0503 highspeed power enable connect >>> Port 7: 0000.0100 power >>> Port 8: 0000.0100 power >>> Device Status: 0x0001 >>> Self Powered >>> >>> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Device Descriptor: >>> bLength 18 >>> bDescriptorType 1 >>> bcdUSB 1.10 >>> bDeviceClass 9 Hub >>> bDeviceSubClass 0 Unused >>> bDeviceProtocol 0 Full speed (or root) hub >>> bMaxPacketSize0 64 >>> idVendor 0x1d6b Linux Foundation >>> idProduct 0x0001 1.1 root hub >>> bcdDevice 3.06 >>> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd >>> iProduct 2 UHCI Host Controller >>> iSerial 1 0000:00:1d.0 >>> bNumConfigurations 1 >>> Configuration Descriptor: >>> bLength 9 >>> bDescriptorType 2 >>> wTotalLength 25 >>> bNumInterfaces 1 >>> bConfigurationValue 1 >>> iConfiguration 0 >>> bmAttributes 0xe0 >>> Self Powered >>> Remote Wakeup >>> MaxPower 0mA >>> Interface Descriptor: >>> bLength 9 >>> bDescriptorType 4 >>> bInterfaceNumber 0 >>> bAlternateSetting 0 >>> bNumEndpoints 1 >>> bInterfaceClass 9 Hub >>> bInterfaceSubClass 0 Unused >>> bInterfaceProtocol 0 Full speed (or root) hub >>> iInterface 0 >>> Endpoint Descriptor: >>> bLength 7 >>> bDescriptorType 5 >>> bEndpointAddress 0x81 EP 1 IN >>> bmAttributes 3 >>> Transfer Type Interrupt >>> Synch Type None >>> Usage Type Data >>> wMaxPacketSize 0x0002 1x 2 bytes >>> bInterval 255 >>> Hub Descriptor: >>> bLength 9 >>> bDescriptorType 41 >>> nNbrPorts 2 >>> wHubCharacteristic 0x000a >>> No power switching (usb 1.0) >>> Per-port overcurrent protection >>> bPwrOn2PwrGood 1 * 2 milli seconds >>> bHubContrCurrent 0 milli Ampere >>> DeviceRemovable 0x00 >>> PortPwrCtrlMask 0xff >>> Hub Port Status: >>> Port 1: 0000.0100 power >>> Port 2: 0000.0100 power >>> Device Status: 0x0001 >>> Self Powered >>> >>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Device Descriptor: >>> bLength 18 >>> bDescriptorType 1 >>> bcdUSB 1.10 >>> bDeviceClass 9 Hub >>> bDeviceSubClass 0 Unused >>> bDeviceProtocol 0 Full speed (or root) hub >>> bMaxPacketSize0 64 >>> idVendor 0x1d6b Linux Foundation >>> idProduct 0x0001 1.1 root hub >>> bcdDevice 3.06 >>> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd >>> iProduct 2 UHCI Host Controller >>> iSerial 1 0000:00:1d.1 >>> bNumConfigurations 1 >>> Configuration Descriptor: >>> bLength 9 >>> bDescriptorType 2 >>> wTotalLength 25 >>> bNumInterfaces 1 >>> bConfigurationValue 1 >>> iConfiguration 0 >>> bmAttributes 0xe0 >>> Self Powered >>> Remote Wakeup >>> MaxPower 0mA >>> Interface Descriptor: >>> bLength 9 >>> bDescriptorType 4 >>> bInterfaceNumber 0 >>> bAlternateSetting 0 >>> bNumEndpoints 1 >>> bInterfaceClass 9 Hub >>> bInterfaceSubClass 0 Unused >>> bInterfaceProtocol 0 Full speed (or root) hub >>> iInterface 0 >>> Endpoint Descriptor: >>> bLength 7 >>> bDescriptorType 5 >>> bEndpointAddress 0x81 EP 1 IN >>> bmAttributes 3 >>> Transfer Type Interrupt >>> Synch Type None >>> Usage Type Data >>> wMaxPacketSize 0x0002 1x 2 bytes >>> bInterval 255 >>> Hub Descriptor: >>> bLength 9 >>> bDescriptorType 41 >>> nNbrPorts 2 >>> wHubCharacteristic 0x000a >>> No power switching (usb 1.0) >>> Per-port overcurrent protection >>> bPwrOn2PwrGood 1 * 2 milli seconds >>> bHubContrCurrent 0 milli Ampere >>> DeviceRemovable 0x00 >>> PortPwrCtrlMask 0xff >>> Hub Port Status: >>> Port 1: 0000.0100 power >>> Port 2: 0000.0100 power >>> Device Status: 0x0001 >>> Self Powered >>> >>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Device Descriptor: >>> bLength 18 >>> bDescriptorType 1 >>> bcdUSB 1.10 >>> bDeviceClass 9 Hub >>> bDeviceSubClass 0 Unused >>> bDeviceProtocol 0 Full speed (or root) hub >>> bMaxPacketSize0 64 >>> idVendor 0x1d6b Linux Foundation >>> idProduct 0x0001 1.1 root hub >>> bcdDevice 3.06 >>> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd >>> iProduct 2 UHCI Host Controller >>> iSerial 1 0000:00:1d.2 >>> bNumConfigurations 1 >>> Configuration Descriptor: >>> bLength 9 >>> bDescriptorType 2 >>> wTotalLength 25 >>> bNumInterfaces 1 >>> bConfigurationValue 1 >>> iConfiguration 0 >>> bmAttributes 0xe0 >>> Self Powered >>> Remote Wakeup >>> MaxPower 0mA >>> Interface Descriptor: >>> bLength 9 >>> bDescriptorType 4 >>> bInterfaceNumber 0 >>> bAlternateSetting 0 >>> bNumEndpoints 1 >>> bInterfaceClass 9 Hub >>> bInterfaceSubClass 0 Unused >>> bInterfaceProtocol 0 Full speed (or root) hub >>> iInterface 0 >>> Endpoint Descriptor: >>> bLength 7 >>> bDescriptorType 5 >>> bEndpointAddress 0x81 EP 1 IN >>> bmAttributes 3 >>> Transfer Type Interrupt >>> Synch Type None >>> Usage Type Data >>> wMaxPacketSize 0x0002 1x 2 bytes >>> bInterval 255 >>> Hub Descriptor: >>> bLength 9 >>> bDescriptorType 41 >>> nNbrPorts 2 >>> wHubCharacteristic 0x000a >>> No power switching (usb 1.0) >>> Per-port overcurrent protection >>> bPwrOn2PwrGood 1 * 2 milli seconds >>> bHubContrCurrent 0 milli Ampere >>> DeviceRemovable 0x00 >>> PortPwrCtrlMask 0xff >>> Hub Port Status: >>> Port 1: 0000.0100 power >>> Port 2: 0000.0100 power >>> Device Status: 0x0001 >>> Self Powered >>> >>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Device Descriptor: >>> bLength 18 >>> bDescriptorType 1 >>> bcdUSB 1.10 >>> bDeviceClass 9 Hub >>> bDeviceSubClass 0 Unused >>> bDeviceProtocol 0 Full speed (or root) hub >>> bMaxPacketSize0 64 >>> idVendor 0x1d6b Linux Foundation >>> idProduct 0x0001 1.1 root hub >>> bcdDevice 3.06 >>> iManufacturer 3 Linux 3.6.10-4.fc18.x86_64 uhci_hcd >>> iProduct 2 UHCI Host Controller >>> iSerial 1 0000:00:1d.3 >>> bNumConfigurations 1 >>> Configuration Descriptor: >>> bLength 9 >>> bDescriptorType 2 >>> wTotalLength 25 >>> bNumInterfaces 1 >>> bConfigurationValue 1 >>> iConfiguration 0 >>> bmAttributes 0xe0 >>> Self Powered >>> Remote Wakeup >>> MaxPower 0mA >>> Interface Descriptor: >>> bLength 9 >>> bDescriptorType 4 >>> bInterfaceNumber 0 >>> bAlternateSetting 0 >>> bNumEndpoints 1 >>> bInterfaceClass 9 Hub >>> bInterfaceSubClass 0 Unused >>> bInterfaceProtocol 0 Full speed (or root) hub >>> iInterface 0 >>> Endpoint Descriptor: >>> bLength 7 >>> bDescriptorType 5 >>> bEndpointAddress 0x81 EP 1 IN >>> bmAttributes 3 >>> Transfer Type Interrupt >>> Synch Type None >>> Usage Type Data >>> wMaxPacketSize 0x0002 1x 2 bytes >>> bInterval 255 >>> Hub Descriptor: >>> bLength 9 >>> bDescriptorType 41 >>> nNbrPorts 2 >>> wHubCharacteristic 0x000a >>> No power switching (usb 1.0) >>> Per-port overcurrent protection >>> bPwrOn2PwrGood 1 * 2 milli seconds >>> bHubContrCurrent 0 milli Ampere >>> DeviceRemovable 0x00 >>> PortPwrCtrlMask 0xff >>> Hub Port Status: >>> Port 1: 0000.0100 power >>> Port 2: 0000.0303 lowspeed power enable connect >>> Device Status: 0x0001 >>> Self Powered >>> >>> >>> >>> On Thu, May 30, 2013 at 8:27 AM, Hans de Goede <hdego...@redhat.com<mailto: >>> hdego...@redhat.com>> wrote: >>> >>> Hi, >>> >>> >>> On 05/30/2013 04:17 PM, Ryan Wilkinson wrote: >>> >>> Hans, >>> >>> Thanks for the info. Remote viewer has keyboard focus when >>> attempting usb pass-through. Just tried again to confirm. These are the >>> two package versions I'm seeing that are installed: >>> >>> virt-viewer.x86_64 0.5.4-3.fc18 >>> virt-viewer.i686 0.5.3-1.fc17 >>> >>> >>> And you can pass the device through manually from the menu? >>> >>> Can you do lsusb -v with the device plugin and then copy and >>> paste the output for the device in question into your next mail ? >>> >>> Regards, >>> >>> Hans >>> >>> >>> >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
