----- Original Message ----- > I'm experimenting with LACP/port aggregation on my public network > interface in my oVirt test setup. My goal is to bind two 1G ports > together. Our network operations team configured two 1G switch ports > appropriately, and I set up the bond between eth0 and eth1 on the node > using the engine. I can't configure the IP of the interface statically > because then I don't get the option to set a gateway, which I need for > our public network. Using DHCP worked before enabling LACP (which > acquires the gateway from the DHCP record). After enabling LACP, when > the node boots, it doesn't get an address. The node gets hostname > "localhost". I have to login to the admin, hit F2, "ifdown PublicNet" > "ifup PublicNet", but then it works! There's obviously some minor delay > issue during node initialization, but there should be some way to tell > it to wait a bit longer?
Hi Jason, Can you please send a pastebin of 'vdsClient 0 getVdsCaps' (or 'vdsClient -s 0 getVdsCaps') on the host with the bond? > > Jason. > > -- > Jason Keltz > Manager of Development > Department of Electrical Engineering and Computer Science > York University, Toronto, Canada > Tel: 416-736-2100 x. 33570 > Fax: 416-736-5872 > _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
