On Thu, Sep 12, 2013 at 9:25 PM, Joop wrote: > Carlos Baptista wrote: >> >> Hi, >> >> I need help. I cant figure how to configure "logical networks" with my >> servers.
[snip] >> ovirt hosts (2 servers) >> 2 interfaces, eth0 and eth1 bonded for management >> ifcfg-bond0 >> DEVICE=bond0 >> IPADDR=192.168.43.10 (192.168.43.9 on the second server) >> NETWORK=192.168.43.0 >> NETMASK=255.255.255.0 GATEWAY=192.168.43.254 >> USERCTL=no >> BOOTPROTO=none >> ONBOOT=yes >> 2 interfaces, eth2 and eth3 bonded, used for VM networks. >> >> This is my problem. These 2 interfaces are exposed to a network trunk >> with a few vlan's. Do I need to create all the bridges for the vlan's at >> the SO level?? Can I create them in the web interface? How can I find >> some docs that point me in the right direction? [snip] I don't remind the official documentation page, but at least you will find this thread interesting: http://lists.ovirt.org/pipermail/users/2013-February/012246.html In particular the detailed explanation at post: http://lists.ovirt.org/pipermail/users/2013-February/012269.html With what detailed, you have NOT to pre-create the bond for eth2 and eth3 but follow the steps and it will create it for you + the vlan on bond and the bridge for your logical network. HIH, Gianluca _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users