Am Dienstag, den 22.10.2013, 00:00 +0200 schrieb Edgars M.:
> Hi, thanks for your replies..
> 
> 
> As suggested by Gabi C, I destroyed RAID on my RAID controller,
> re-created it and after that it worked.

Hey Edgars and Gabi,

nice that both of you could solve this problem.
Could you tell what kind of raid it was? Was it a "fake raid" or a real
raid controller, and how did the raid setup look when it failed and how
did it look afterwards?
I'd like to capture these informations to nail down this problem a bit
more.

Thanks
fabian

> 
> Thanks again.
> 
> 
> On Mon, Oct 21, 2013 at 10:45 PM, Joey Boggs <[email protected]>
> wrote:
>         On 10/21/2013 08:59 AM, Gabi C wrote:
>         
>         > Hello!
>         > 
>         > 
>         > Had same problem on IBM xSeries  3650. Aparently was an RAID
>         > problem (Serve RID in my case). I had to wipe the disk,
>         > recreate the  array an wait until it was OK and only after
>         > that I manage to install.
>         > 
>         > 
>         > 
>         > On Mon, Oct 21, 2013 at 3:45 PM, Edgars M.
>         > <[email protected]> wrote:
>         >         Hi 
>         >         
>         >         
>         >         I am trying to install oVirt Node
>         >         (ovirt-node-iso-3.0.1-1.0.2.vdsm.fc19.iso) on DELL
>         >         R805 server, but every time install fails
>         >         with Exception: RunTimeError('Failed to
>         >         partition/format'). I also
>         >         tried ovirt-node-iso-3.0.1-1.0.2.vdsm.el6.iso
>         >         version and the same error occures. I tried
>         >         different partition sizes and I always make sure
>         >         that partitions dont exceed the total disk space. I
>         >         browsed log fails and could not find anything
>         >         relevant. I am really out of ideas...
>         >         
>         >         
>         >         Any advise?
>         >         
>         >         
>         >         Thanks
>         >         Edgars
>         >         
>         >         _______________________________________________
>         >         Users mailing list
>         >         [email protected]
>         >         http://lists.ovirt.org/mailman/listinfo/users
>         >         
>         > 
>         > 
>         > 
>         > 
>         > _______________________________________________
>         > Users mailing list
>         > [email protected]
>         > http://lists.ovirt.org/mailman/listinfo/users
>         
>         
>         
>         Once it fails, press F2 to drop to
>         shell. /tmp/ovirt.log /var/log/ovirt.log
>         and /var/log/ovirt-node.log will have the debug messages in
>         it. Paste those in here if you can.
>         
> 
> 
> _______________________________________________
> Users mailing list
> [email protected]
> http://lists.ovirt.org/mailman/listinfo/users


_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users

Reply via email to