in my case $brick_path =/data
getfattr -d /data return NOTHING on both nodes!!! On Wed, Dec 18, 2013 at 1:46 PM, Fabian Deutsch <[email protected]> wrote: > Am Mittwoch, den 18.12.2013, 13:26 +0200 schrieb Gabi C: > > Update on Glusterfs issue > > > > > > I manage to recover lost volume after recretaing the same volume name > > with same bricks, whisch raised an error message, resolved by, on both > > nodes: > > > > setfattr -x trusted.glusterfs.volume-id $brick_path > > setfattr -x trusted.gfid $brick_path > > Hey, > > good that you could recover them. > > Could you please provide $brick_path and getfattr -d $brick_path > > The question is if and/or why the fattrs are not stored. > > - fabian > > > > > > > > > On Wed, Dec 18, 2013 at 12:12 PM, Gabi C <[email protected]> wrote: > > node 1: > > > > [root@virtual5 admin]# cat /config/files > > /etc/fstab > > /etc/shadow > > /etc/default/ovirt > > /etc/ssh/ssh_host_key > > /etc/ssh/ssh_host_key.pub > > /etc/ssh/ssh_host_dsa_key > > /etc/ssh/ssh_host_dsa_key.pub > > /etc/ssh/ssh_host_rsa_key > > /etc/ssh/ssh_host_rsa_key.pub > > /etc/rsyslog.conf > > /etc/libvirt/libvirtd.conf > > /etc/libvirt/passwd.db > > /etc/passwd > > /etc/sysconfig/network > > /etc/collectd.conf > > /etc/libvirt/qemu/networks > > /etc/ssh/sshd_config > > /etc/pki > > /etc/logrotate.d/ovirt-node > > /var/lib/random-seed > > /etc/iscsi/initiatorname.iscsi > > /etc/libvirt/qemu.conf > > /etc/sysconfig/libvirtd > > /etc/logrotate.d/libvirtd > > /etc/multipath.conf > > /etc/hosts > > /etc/sysconfig/network-scripts/ifcfg-enp3s0 > > /etc/sysconfig/network-scripts/ifcfg-lo > > /etc/ntp.conf > > /etc/shadow > > /etc/vdsm-reg/vdsm-reg.conf > > /etc/shadow > > /etc/shadow > > /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt > > /etc/sysconfig/network-scripts/route-ovirtmgmt > > /etc/sysconfig/network-scripts/rule-ovirtmgmt > > /root/.ssh/authorized_keys > > /etc/vdsm/vdsm.id > > /etc/udev/rules.d/12-ovirt-iosched.rules > > /etc/vdsm/vdsm.conf > > /etc/sysconfig/iptables > > /etc/resolv.conf > > /etc/sysconfig/network-scripts/ifcfg-VPO_IPPROXY > > /etc/sysconfig/network-scripts/ifcfg-enp6s0 > > /etc/sysconfig/network-scripts/ifcfg-enp6s0.50 > > /etc/glusterfs/glusterd.vol > > /etc/selinux/config > > > > > > > > > > > > > > > > > > node 2: > > > > > > [root@virtual4 ~]# cat /config/files > > /etc/fstab > > /etc/shadow > > /etc/default/ovirt > > /etc/ssh/ssh_host_key > > /etc/ssh/ssh_host_key.pub > > /etc/ssh/ssh_host_dsa_key > > /etc/ssh/ssh_host_dsa_key.pub > > /etc/ssh/ssh_host_rsa_key > > /etc/ssh/ssh_host_rsa_key.pub > > /etc/rsyslog.conf > > /etc/libvirt/libvirtd.conf > > /etc/libvirt/passwd.db > > /etc/passwd > > /etc/sysconfig/network > > /etc/collectd.conf > > /etc/libvirt/qemu/networks > > /etc/ssh/sshd_config > > /etc/pki > > /etc/logrotate.d/ovirt-node > > /var/lib/random-seed > > /etc/iscsi/initiatorname.iscsi > > /etc/libvirt/qemu.conf > > /etc/sysconfig/libvirtd > > /etc/logrotate.d/libvirtd > > /etc/multipath.conf > > /etc/hosts > > /etc/sysconfig/network-scripts/ifcfg-enp3s0 > > /etc/sysconfig/network-scripts/ifcfg-lo > > /etc/shadow > > /etc/shadow > > /etc/vdsm-reg/vdsm-reg.conf > > /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt > > /etc/sysconfig/network-scripts/route-ovirtmgmt > > /etc/sysconfig/network-scripts/rule-ovirtmgmt > > /root/.ssh/authorized_keys > > /etc/shadow > > /etc/shadow > > /etc/vdsm/vdsm.id > > /etc/udev/rules.d/12-ovirt-iosched.rules > > /etc/sysconfig/iptables > > /etc/vdsm/vdsm.conf > > /etc/shadow > > /etc/resolv.conf > > /etc/ntp.conf > > /etc/sysconfig/network-scripts/ifcfg-VPO_IPPROXY > > /etc/sysconfig/network-scripts/ifcfg-enp6s0 > > /etc/sysconfig/network-scripts/ifcfg-enp6s0.50 > > /etc/glusterfs/glusterd.vol > > /etc/selinux/config > > > > > > > > > > On Wed, Dec 18, 2013 at 12:07 PM, Fabian Deutsch > > <[email protected]> wrote: > > Am Mittwoch, den 18.12.2013, 12:03 +0200 schrieb Gabi > > C: > > > So here it is: > > > > > > > > > in tab volumes add new volume - Replicated, then > > added storage - > > > data/glusterfs. Then I impoerted Vm, ran them and at > > some point, > > > needing some space for a Redhat Satellite instance > > I decided to put > > > both node in maintenace stop them add new disk > > devices and restart, > > > but after restart the gluster volume defined under > > Volumes Tab > > > vanished! > > > > > > Antoni, > > > > can you tell what log files to look at to find out why > > that storage > > domain vanished - from a Engine side? > > > > And do you know what files related to gluster are > > changed on the Node > > side? > > > > Gabi, > > > > could you please provide the contents of /config/files > > on the Node. > > > > > Glusterfs data goes under /data directory which was > > automatically > > > configured when I installed the node. > > > > > > Yep, /data is on the Data LV - that should be good. > > > > - fabian > > > > > > > > > > > On Wed, Dec 18, 2013 at 11:45 AM, Fabian Deutsch > > <[email protected]> > > > wrote: > > > Am Mittwoch, den 18.12.2013, 11:42 +0200 > > schrieb Gabi C: > > > > Yes, it is the VM part..I just run into an > > issue. My setup > > > consist in > > > > 2 nodes with glusterfs and after adding > > supplemental hard > > > disk, after > > > > reboot I've lost glusterfs volumes! > > > > > > > > > Could you exactly explain what you > > configured? > > > > > > > > > > > How can I persist any configuration on > > node and I refer here > > > to > > > > ''setenforce 0'' - for ssh login to work- > > and further > > > > > > > > > How changes can be persisted on Node can be > > found here: > > > > > > http://www.ovirt.org/Node_Troubleshooting#Making_changes_on_the_host > > > > > > Do you know into what path the glusterfs > > data goes? Or is it > > > written > > > directly onto a disk/LV? > > > > > > - fabian > > > > > > > "" > > http://www.ovirt.org/Features/GlusterFS_Storage_Domain > > > > * option rpc-auth-allow-insecure on > > ==> in > > > glusterd.vol (ensure > > > > u restart glusterd service... for > > this to take > > > effect) > > > > > > > * volume set <volname> > > server.allow-insecure on ==> > > > (ensure u > > > > stop and start the volume.. for > > this to take > > > effect)'' > > > > > > > > > > > > Thanks! > > > > > > > > > > > > > > > > > > > > > > > > On Wed, Dec 18, 2013 at 11:35 AM, Fabian > > Deutsch > > > <[email protected]> > > > > wrote: > > > > Am Mittwoch, den 18.12.2013, 08:34 > > +0200 schrieb > > > Gabi C: > > > > > Hello! > > > > > > > > > > > > > > > In order to increase disk space > > I want to add a > > > new disk > > > > drive to > > > > > ovirt node. After adding this > > should I proceed as > > > "normal" - > > > > pvcreate, > > > > > vgcreate, lvcreate and so on - > > or these > > > configuration will > > > > not > > > > > persist? > > > > > > > > > > > > Hey Gabi, > > > > > > > > basically plain LVM is used in > > Node - so yes > > > pvcreate and > > > > lvextend can > > > > be used. > > > > What storage part do you want to > > extend? The part > > > where the > > > > VMs reside? > > > > You will also need to take care to > > extend the > > > filesystem. > > > > > > > > - fabian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
