Hi, No I'm not. At this time the engine is on a virtualbox vm. Everything is on top of centos 6.5. Regards Regards El dic 19, 2013 6:39 AM, "Assaf Muller" <amul...@redhat.com> escribió:
> Juan - Are you using an all-in-one? > > Assaf Muller, Cloud Networking Engineer > Red Hat > > > ----- Original Message ----- > From: "Juan Pablo Lorier" <jplor...@gmail.com> > To: "Antoni Segura Puimedon" <asegu...@redhat.com>, "Itamar Heim" < > ih...@redhat.com> > Cc: users@ovirt.org > Sent: Monday, December 16, 2013 9:16:13 PM > Subject: Re: [Users] simple networking? [SOLVED] mostly > > Hi Antoni, > > I've tried two secentarios: to create a ifcfg-eth0.128 with the > parameters so it survives restarts, and to create dinamically with > vconfig and ifconfig so it does not survive the restart to see if ovirt > get the mgmt working. > The only thing that worked to me was creating the hole ovirtmgmt bridge > on top or the bondX.128 and of course, it does not fails. > > This log is from one of the last two hosts I set up (3.3.1) where I > didn't create the bond, just created a vlan on top of eth0. > > > https://drive.google.com/file/d/0B9OrU8RK9m26TjdGcTBLbkJrYVU/edit?usp=sharing > > Regards, > > > On 16/12/13 16:52, Antoni Segura Puimedon wrote: > > Hi Juan Pablo, > > > > Could you please share: > > > > /var/log/vdsm/supervdsm.log > > > > So that I can see why the installation fails? I'd also like to know > > how you set up the pre-existent vlan on the host. > > > > ----- Original Message ----- > >> From: "Itamar Heim" <ih...@redhat.com> > >> To: "Juan Pablo Lorier" <jplor...@gmail.com>, users@ovirt.org, "Dan > Kenigsberg" <dan...@redhat.com>, "Antoni Segura > >> Puimedon" <asegu...@redhat.com> > >> Sent: Monday, December 16, 2013 7:13:04 PM > >> Subject: Re: [Users] simple networking? [SOLVED] mostly > >> > >> On 12/16/2013 12:54 PM, Juan Pablo Lorier wrote: > >>> Itamar, > >>> > >>> I have the same problem and already have mentioned that in previous > >>> posts. In my case, I have vlan 128 tagged assigned for ovirtmgmt so I > >>> set the host ip manually on top of a vlan interface and the, after > ovirt > >>> does install the node, it fails to finish as it can't manage properly > to > >>> create the bridge and pass the ip to the brand new bridge. The > ovirtmgmt > >>> interface I create in engine is a bond (and originally I configure just > >>> a single interface with the ip to grant engine access), just in case > >>> this changes the scenario. > >>> Regards, > >>> > >>> _______________________________________________ > >>> Users mailing list > >>> Users@ovirt.org > >>> http://lists.ovirt.org/mailman/listinfo/users > >>> > >> dan/toni - thoughts? > >> > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users