And here's the prepareVolumePath entry Thread-622::DEBUG::2013-12-31 05:06:02,576::task::974::TaskManager.Task::(_decref) Task=`8ae0743d-8e3e-4516-9d67-7713fa546759`::ref 0 aborting False Thread-622::INFO::2013-12-31 05:06:02,576::clientIF::350::vds::(prepareVolumePath) prepared volume path: /rhev/data-center/mnt/_data_images_rhev/66e0b27c-dcbb-4b6e-9a58-8213e8380c65/images/7c063b30-634a-483b-82aa-7f19d2ae46cd/b0839e46-9f79-49b2-ae34-f7cafb626c75 Thread-622::DEBUG::2013-12-31 05:06:02,589::utils::489::root::(execCmd) '/usr/libexec/vdsm/hooks/before_vm_start/50_vhostmd' (cwd None) Thread-622::DEBUG::2013-12-31 05:06:02,642::utils::509::root::(execCmd) SUCCESS: <err> = ''; <rc> = 0 Thread-622::INFO::2013-12-31 05:06:02,642::hooks::88::root::(_runHooksDir) Thread-622::DEBUG::2013-12-31 05:06:02,643::vm::2925::vm.Vm::(_run) vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::<?xml version="1.0"...
On Wed, Jan 1, 2014 at 12:12 PM, Nauman Abbas <[email protected]>wrote: > Found it. > http://ur1.ca/gakse > > Also here's the versions > vdsm 4.13 > sanlock 2.8 > libvirt 1.1.3.1 > qemu 1.6.1 > > > > > On Wed, Jan 1, 2014 at 11:56 AM, Gadi Ickowicz <[email protected]>wrote: > >> the lines you added that are right before the Fpaste link are the actual >> lines messages from libvirt that the vm dies. This message from libvirt is >> then shown later as the ERROR in vdsm in the Fpaste link. >> >> The log should contain, very close to the lines you paste, but a bit >> before, an xml. it should look something like what I am pasting below. >> Also, the line right before the xml should contain a prepareVolumePath >> entry: >> Thread-50::DEBUG::2013-12-25 14:30:45,282::vm::3031::vm.Vm::(_run) >> vmId=`fdfaec39-b981-4bd7-9852-6d5ac6ce2b37`::<?xml version="1.0" >> encoding="utf-8"?> >> ...<the xml continues a bit with all the vm properties> >> >> also - what versions of vdsm, libvirt, sanlock and qemu are you using? >> >> Gadi Ickowicz >> >> ----- Original Message ----- >> From: "Nauman Abbas" <[email protected]> >> To: "Gadi Ickowicz" <[email protected]> >> Cc: "[email protected]" <[email protected]> >> Sent: Wednesday, January 1, 2014 7:30:24 AM >> Subject: Re: [Users] VM not starting up >> >> Also I believe these lines right before what I pasted with Fpaste link >> would be relevant. >> >> Thread-622::DEBUG::2013-12-31 >> 05:06:02,957::libvirtconnection::108::libvirtconnection::(wrapper) Unknown >> libvirterror: ecode: 38 edom: 0 level: 2 message: Child quit during >> startup >> handshake: Input/output error >> Thread-622::DEBUG::2013-12-31 >> 05:06:02,957::vm::2106::vm.Vm::(_startUnderlyingVm) >> vmId=`147a1deb-3795-4153-a820-ceabd8db15f3`::_ongoingCreations released >> >> >> On Wed, Jan 1, 2014 at 10:23 AM, Nauman Abbas <[email protected] >> >wrote: >> >> > I'm going through the log (which is quite big) and I've found out this >> > part which is like 2 seconds after the vmcreate part. Have a look maybe >> > this is what you're looking for. It contains the ERROR and Traceback in >> it. >> > >> > >> > http://ur1.ca/gakhc >> > >> > >> > On Tue, Dec 31, 2013 at 4:36 PM, Gadi Ickowicz <[email protected] >> >wrote: >> > >> >> It would be helpful to get a bit more information from the logs - after >> >> the vmCreate there are several other things that occur before the vm >> >> process is actually launched (prepareImage and following that the >> actual >> >> vm's should be visible in the log). Try to search for an error in the >> vdsm >> >> log, and if you cannot find one attach logs containing the vmCreate >> and the >> >> other operations I mentioned. >> >> >> >> Errors in the vdsm log are usually logged in lines containing ERROR, >> but >> >> sometimes if the error comes from libvirt it may not contain the >> uppercase >> >> ERROR and be logged as libvirtError or something similar. >> >> >> >> you should also have the qemu log for the vm you are trying to run. >> >> usually under /var/log/libvirt/qemu/<name_of_the_vm>.log - maybe that >> will >> >> give more information regarding the failure >> >> >> >> Gadi Ickowicz >> >> >> >> ----- Original Message ----- >> >> From: "Joop" <[email protected]> >> >> To: "Nauman Abbas" <[email protected]> >> >> Cc: "[email protected]" <[email protected]> >> >> Sent: Tuesday, December 31, 2013 12:51:10 PM >> >> Subject: Re: [Users] VM not starting up >> >> >> >> Nauman Abbas <[email protected]> wrote: >> >> >> >> >> >> I've attached the portions with vmcreate. I found 5 instances of pairs >> of >> >> call vmcreate and return vmcreate. I've separated them with lines. See >> if >> >> that helps. >> >> >> >> >> >> On Tue, Dec 31, 2013 at 2:58 PM, Gadi Ickowicz < [email protected] > >> >> wrote: >> >> >> >> >> >> Hi, >> >> >> >> Maybe you can send just the relevant part of the vdsm logs that contain >> >> the attempt to launch the vm itself - it should start with vmCreate. >> Try to >> >> find "::call vmCreate with (..." and either find the matching "return >> >> vmCreate with" >> >> or an maybe there is an ERROR or Traceback in the vdsm log following >> the >> >> vmCreate call. >> >> >> >> Gadi Ickowicz >> >> >> >> ----- Original Message ----- >> >> From: "Nauman Abbas" < [email protected] > >> >> To: "Meital Bourvine" < [email protected] > >> >> Cc: " [email protected] " < [email protected] > >> >> Sent: Tuesday, December 31, 2013 11:47:12 AM >> >> Subject: Re: [Users] VM not starting up >> >> >> >> Vdsm is running fine. Also checked the clocks. You were right, the >> Engine >> >> clock was 5 hours ahead of Node clock. I've corrected that but still >> the >> >> same issue. >> >> >> >> >> >> On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < >> [email protected]> wrote: >> >> >> >> >> >> >> >> Are you sure that vdsm is running? >> >> >> >> The error happened at 2013-12-31 11:32:56,999 (engine.log) >> >> but the last line in vdsm.log is from 2013-12-31 07:20:50,807 >> >> >> >> Also make sure that your clocked are synced. >> >> >> >> >> >> >> >> >> >> >> >> >> >> From: "Nauman Abbas" < [email protected] > >> >> To: "Meital Bourvine" < [email protected] > >> >> Cc: " [email protected] " < [email protected] > >> >> Sent: Tuesday, December 31, 2013 9:39:09 AM >> >> >> >> Subject: Re: [Users] VM not starting up >> >> >> >> Sending files one by one. Vdsm.log >> >> >> >> >> >> On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < >> [email protected]> wrote: >> >> >> >> >> >> >> >> Engine log can be found on the engine (while vdsm.log is on the host). >> >> The full path is - /var/log/ovirt-engine/engine.log >> >> >> >> audit.log - /var/log/audit/audit.log >> >> >> >> About the vdsm log - I don't see any error there, I think that you cut >> >> too much from it. >> >> >> >> >> >> >> >> >> >> From: "Nauman Abbas" < [email protected] > >> >> To: "Meital Bourvine" < [email protected] > >> >> Cc: " [email protected] " < [email protected] > >> >> Sent: Tuesday, December 31, 2013 8:42:43 AM >> >> Subject: Re: [Users] VM not starting up >> >> >> >> >> >> Hello Meital >> >> >> >> SELinux is off. The cluster doesn't work if SELinux is on, my hosts and >> >> storage is showing up as okay but VM is not starting up. >> >> >> >> I've managed to get vdsm.log but cannot find engine.log and audit.log. >> >> Sorry for being a noob, if you can tell me the path to these files I'll >> >> send them right away. >> >> >> >> >> >> On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < >> [email protected]> wrote: >> >> >> >> >> >> >> >> Hi Nauman, >> >> >> >> Maybe it's a selinux issue? >> >> Please try running `setenforce 0` before starting the vm. >> >> >> >> Also please attach engine.log, vdsm.log, and audit.log >> >> >> >> >> >> >> >> >> >> From: "Nauman Abbas" < [email protected] > >> >> To: " [email protected] " < [email protected] > >> >> Sent: Tuesday, December 31, 2013 7:13:01 AM >> >> Subject: [Users] VM not starting up >> >> >> >> >> >> Hello all, >> >> >> >> First of all thank you for your help, I've finally managed to get my >> >> Cluster configured properly but now that I create VMs I'm facing >> another >> >> problem. Whenever I start my VM I get this error. >> >> >> >> " VM TestVm is down. Exit message: Child quit during startup handshake: >> >> Input/output error." >> >> >> >> I've googled around but haven't found any satisfactory solution. If >> >> anyone can help out it would be great. >> >> >> >> Regards >> >> >> >> Nauman Abbas >> >> Assistant System Administrator (LMS), >> >> Room No. A-207, SEECS, >> >> National University of Sciences & Technology, >> >> + 92 321 5359946 >> >> >> >> _______________________________________________ >> >> Users mailing list >> >> [email protected] >> >> http://lists.ovirt.org/mailman/listinfo/users >> >> >> >> >> >> >> >> >> >> -- >> >> >> >> Nauman Abbas >> >> Assistant System Administrator (LMS), >> >> Room No. A-207, SEECS, >> >> National University of Sciences & Technology, >> >> + 92 321 5359946 >> >> >> >> >> >> >> >> >> >> -- >> >> >> >> Nauman Abbas >> >> Assistant System Administrator (LMS), >> >> Room No. A-207, SEECS, >> >> National University of Sciences & Technology, >> >> + 92 321 5359946 >> >> >> >> >> >> >> >> >> >> -- >> >> >> >> Nauman Abbas >> >> Assistant System Administrator (LMS), >> >> Room No. A-207, SEECS, >> >> National University of Sciences & Technology, >> >> + 92 321 5359946 >> >> >> >> _______________________________________________ >> >> Users mailing list >> >> [email protected] >> >> http://lists.ovirt.org/mailman/listinfo/users >> >> >> >> >> >> >> >> -- >> >> >> >> Nauman Abbas >> >> Assistant System Administrator (LMS), >> >> Room No. A-207, SEECS, >> >> National University of Sciences & Technology, >> >> + 92 321 5359946 >> >> >> >> Paste your logs to fpaste.org or similar and put the url in the mail. >> >> Your snippets don‘t contain any errors that i can see. >> >> >> >> -- >> >> Sent from my Android tablet with K-9 Mail. Please excuse my brevity. >> >> >> >> _______________________________________________ >> >> Users mailing list >> >> [email protected] >> >> http://lists.ovirt.org/mailman/listinfo/users >> >> >> > >> > >> > >> > -- >> > >> > Nauman Abbas >> > Assistant System Administrator (LMS), >> > Room No. A-207, SEECS, >> > National University of Sciences & Technology, >> > + 92 321 5359946 >> > >> >> >> >> -- >> >> Nauman Abbas >> Assistant System Administrator (LMS), >> Room No. A-207, SEECS, >> National University of Sciences & Technology, >> + 92 321 5359946 >> > > > > -- > > Nauman Abbas > Assistant System Administrator (LMS), > Room No. A-207, SEECS, > National University of Sciences & Technology, > + 92 321 5359946 > -- Nauman Abbas Assistant System Administrator (LMS), Room No. A-207, SEECS, National University of Sciences & Technology, + 92 321 5359946
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
