On 01/18/2014 01:07 AM, William Kwan wrote:
I'm sorry. This seems to be getting too long from a possible confused user =) Yes, I followed the step and it works as expected. However I want to have VMs able to reach the mgmt network.let's make it simpler. eth0 - mgmt network, untagged, this is where I ssh to systems eth1 - some other subnet I have two nodes built and setup with ovirt. They run fine. ovirtmgmt runs on eth0 But I want to have a VM able reach to both - mgmt network on eth0 - vlanX on eth0 That's why I was testing different things I added eth0.X for VLAN X under the OS, but it won't show up under oVirt. I can add more physical interface to separate the traffic 1. subnet for ovirt 2. subnet for management traffic 3. subnet for whatever subnet VM reach out to W
this may sound weird, but why does the mgmt network has to be untagged? you could just have mgmt network in a vlan as well?
On Friday, January 17, 2014 5:27 PM, Itamar Heim <[email protected]> wrote: On 01/16/2014 08:35 PM, Assaf Muller wrote: > Ok so if you want to set the management network (untagged) and VM networks (tagged) on the same bond, > then the management network has to be non-VM. IE: You won't be able to connect instances to the management > network. William - did this work for you followin assaf steps below? you don't need to change anything at host level, all should be done from the webadmin > > > Assaf Muller, Cloud Networking Engineer > Red Hat > > ----- Original Message ----- > From: "William Kwan" <[email protected] <mailto:[email protected]>> > To: "Assaf Muller" <[email protected] <mailto:[email protected]>> > Cc: [email protected] <mailto:[email protected]>, "Christian Hernandez" <[email protected] <mailto:[email protected]>> > Sent: Thursday, January 16, 2014 7:59:46 PM > Subject: Re: [Users] vlan on mgmt network > > Assaf, > > Thanks a lot. Will I be able to mix tagged and untagged traffic? > > Example: > - bond0 on my two systems are on the management network, untagged > - my VMs all have one connection to this management network > - I want to setup a new VM with two interfaces, one on the management network, one on the tagged VLAN > > > This will work it out? > Thanks > Will > > > > > On Thursday, January 16, 2014 12:26 PM, Assaf Muller <[email protected] <mailto:[email protected]>> wrote: > > You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then place > as many VM, tagged networks as you'd like on the same NIC or bond. > > Here's a working upgrade procedure: > 1) Edit ovirtmgmt, mark it as non-VM. > 2) Go to all hosts using this network, select Setup Host Networks. You'll see that > ovirtmgmt is out of sync. Edit the network and mark sync. Hit ok on the dialog of course :) > Step 2 will be done for you automatically when you edit logical networks in oVirt 3.4 > 3) Create VM, VLAN networks > 4) Go to all hosts you wish to place those networks, and drag the new VLAN networks on > bond0. > > You don't need to do any prep work on your hosts before this procedure. oVirt will take care > of this stuff for you. > > > Assaf Muller, Cloud Networking Engineer > Red Hat > > ----- Original Message ----- > From: "Christian Hernandez" <[email protected] <mailto:[email protected]>> > To: "William Kwan" <[email protected] <mailto:[email protected]>> > Cc: [email protected] <mailto:[email protected]> > Sent: Thursday, January 16, 2014 6:36:49 PM > Subject: Re: [Users] vlan on mgmt network > > Assuming it's on the same VLAN... > > I would make the subinterface (i.e. bond0.1) > > > Thank you, > > Christian Hernandez > 1225 Los Angeles Street > Glendale, CA 91204 > Phone: 877-782-2737 ext. 4566 > Fax: 818-265-3152 > [email protected] <mailto:[email protected]> <mailto: [email protected] <mailto:[email protected]> > > www.4over.com < http://www.4over.com <http://www.4over.com/>> > > > On Thu, Jan 16, 2014 at 8:31 AM, William Kwan < [email protected] <mailto:[email protected]> > wrote: > > > > Hi all, > > CentOS 6.5 and oVirt 3.3 > > Let's say I have bond0 (eth0 and eth1) on a management network. > Logical network ovirtmgmt is set and working on top of Interfaces bond0. > > Is it possible to have another Logical network, e.g. ovirt777, on the same Interface bond0? > > Or I should add a virtual interface, e.g. bond0.1, tie it to VLAN 777 and create logical network with this virtual interface? > > Wil > > > _______________________________________________ > Users mailing list > [email protected] <mailto:[email protected]> > http://lists.ovirt.org/mailman/listinfo/users > > > > > _______________________________________________ > Users mailing list > [email protected] <mailto:[email protected]> > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ > Users mailing list > [email protected] <mailto:[email protected]> > http://lists.ovirt.org/mailman/listinfo/users >
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
