Il 22/01/2014 21:32, Brad House ha scritto: > I'm trying to test out the oVirt Hosted Engine, but am experiencing a > failure early on and was hoping someone could point me in the right > direction. I'm not familiar enough with the architecture of oVirt > to start to debug this situation. > > Basically, I run the "hosted-engine --deploy" command and it outputs: > > ======================== > [ INFO ] Stage: Initializing > Continuing will configure this host for serving as hypervisor and > create a VM where you have to install oVirt Engine afterwards. > Are you sure you want to continue? (Yes, No)[Yes]: > [ INFO ] Generating a temporary VNC password. > [ INFO ] Stage: Environment setup > Configuration files: [] > Log file: > /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140122110741.log > Version: otopi-1.2.0_beta (otopi-1.2.0-0.1.beta.fc19) > [ INFO ] Hardware supports virtualization > [ INFO ] Bridge ovirtmgmt already created > [ INFO ] Stage: Environment packages setup > [ INFO ] Stage: Programs detection > [ INFO ] Stage: Environment setup > [ INFO ] Waiting for VDSM hardware info > [ INFO ] Waiting for VDSM hardware info > [ INFO ] Waiting for VDSM hardware info > [ INFO ] Waiting for VDSM hardware info > [ INFO ] Waiting for VDSM hardware info > [ INFO ] Waiting for VDSM hardware info > [ INFO ] Waiting for VDSM hardware info > [ INFO ] Waiting for VDSM hardware info > [ INFO ] Waiting for VDSM hardware info > [ INFO ] Waiting for VDSM hardware info > [ INFO ] Stage: Environment customization > > --== STORAGE CONFIGURATION ==-- > > During customization use CTRL-D to abort. > [ ERROR ] Failed to execute stage 'Environment customization': [Errno 111] > Connection refused > [ INFO ] Stage: Clean up > [ INFO ] Stage: Pre-termination > [ INFO ] Stage: Termination > ======================== > > /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140122110741.log > has: > ======================== > 2014-01-22 11:07:57 DEBUG > otopi.plugins.ovirt_hosted_engine_setup.storage.storage > storage._check_existing_pools:631 getConnectedStoragePoolsList > 2014-01-22 11:07:57 DEBUG otopi.context context._executeMethod:152 method > exception > Traceback (most recent call last): > File "/usr/lib/python2.7/site-packages/otopi/context.py", line 142, in > _executeMethod > method['method']() > File > "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/storage/storage.py", > line 729, in _customization > self._check_existing_pools() > File > "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/storage/storage.py", > line 632, in _check_existing_pools > pools = self.serv.s.getConnectedStoragePoolsList() > File "/usr/lib64/python2.7/xmlrpclib.py", line 1224, in __call__ > return self.__send(self.__name, args) > File "/usr/lib64/python2.7/xmlrpclib.py", line 1578, in __request > verbose=self.__verbose > File "/usr/lib64/python2.7/xmlrpclib.py", line 1264, in request > return self.single_request(host, handler, request_body, verbose) > File "/usr/lib64/python2.7/xmlrpclib.py", line 1292, in single_request > self.send_content(h, request_body) > File "/usr/lib64/python2.7/xmlrpclib.py", line 1439, in send_content > connection.endheaders(request_body) > File "/usr/lib64/python2.7/httplib.py", line 969, in endheaders > self._send_output(message_body) > File "/usr/lib64/python2.7/httplib.py", line 829, in _send_output > self.send(msg) > File "/usr/lib64/python2.7/httplib.py", line 791, in send > self.connect() > File "/usr/lib64/python2.7/site-packages/vdsm/SecureXMLRPCServer.py", line > 188, in connect > sock = socket.create_connection((self.host, self.port), self.timeout) > File "/usr/lib64/python2.7/socket.py", line 571, in create_connection > raise err > error: [Errno 111] Connection refused > 2014-01-22 11:07:57 ERROR otopi.context context._executeMethod:161 Failed to > execute stage 'Environment customization': [Errno 111] Connection refused > ========================
It seems that VDSM is not working on your system. Can you attach vdsm logs? > > Unfortunately I do not know what service this is trying to connect to, or > what hostname > or port to try to start debugging that. > > Some other useful information about my environment: > > - Fedora 19 (64bit), minimal install, selected 'standard' add-on utilities. > This was a > fresh install just for this test. > - 512MB /boot ext4 > - 80GB / ext4 in LVM, 220GB free in VG > - "yum -y update" performed to get all latest updates > - SElinux in permissive mode > - Hardware: > - Supermicro 1026T-URF barebones > - single CPU populated (Xeon E5630 4x2.53GHz) > - 12GB ECC DDR3 RAM > - H/W Raid with SSDs > - Networking: > - Network Manager DISABLED > - 4 GbE ports (p2p1, p2p2, em1, em2) > - all 4 ports configured in a bond (bond0) using balance-alb > - ovirtmgmt bridge pre-created with 'bond0' as the only member, assigned a > static IP address > - firewall DISABLED > - /etc/yum.repos.d/ovirt.rep has ONLY the 3.4.0 beta repo enabled: > [ovirt-3.4.0-beta] > name=3.4.0 beta testing repo for the oVirt project > baseurl=http://ovirt.org/releases/3.4.0-beta/rpm/Fedora/$releasever/ > enabled=1 > skip_if_unavailable=1 > gpgcheck=0 > - only other packages installed were "ntp" and "screen" > - performed "yum install ovirt-hosted-engine-setup" then "screen" then > "hosted-engine --deploy" > > > > Any guidance or things to test would be _greatly_ appreciated. > > Thanks! > -Brad > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
