OK, we are on the same line there. The issue is that it doesn't work on this host, others do.
I have a 3.3 cluster and 3.4... both are enabled using the command... or can't you have 2 versions ? 2014-05-15 12:43 GMT+02:00 Itamar Heim <ih...@redhat.com>: > On 05/15/2014 06:42 AM, Matt . wrote: > >> OK, now I'm confused. >> >> For MacSpoofing we per default don't have the "macspoof" feature in the >> engine am I right ? >> >> To get that... you need to set: >> >> engine-config -s EnableMACAntiSpoofingFilterRules=false --cver=3.X >> >> But no hook needs to be installed for this ? I don't have ping at the >> momment with macspoof set on true on a VM. >> >> > macspoofing is more than just promiscuous mode for port mirroring, which > does require the hook to be installed (and the VM to be restarted) > > >> >> >> 2014-05-15 12:35 GMT+02:00 Itamar Heim <ih...@redhat.com >> <mailto:ih...@redhat.com>>: >> >> >> On 05/15/2014 04:26 AM, Matt . wrote: >> >> Itamar, >> >> On some testhost I'm updating now to 3.4(.x) I also need to >> install the >> hook it seems... it's not there by default. >> >> Any idea why you thought it should be ? >> >> >> there is no need for the hook for port mirroring. you can define a >> vnic profile with port mirroring via the engine and vdsm has this >> feature built-in. >> >> if you need more than just port mirroring (say, port forwarding), >> then you still need the hook. >> >> >> Cheers, >> >> Matt >> >> >> 2014-05-12 14:55 GMT+02:00 Matt . <yamakasi....@gmail.com >> <mailto:yamakasi....@gmail.com> >> <mailto:yamakasi....@gmail.com <mailto:yamakasi....@gmail.com >> >__>>: >> >> >> Hi, >> >> I really needed to enable the hook... Will investigate on >> new hosts! >> >> >> 2014-05-11 22:37 GMT+02:00 Itamar Heim <ih...@redhat.com >> <mailto:ih...@redhat.com> >> <mailto:ih...@redhat.com <mailto:ih...@redhat.com>>>: >> >> >> >> On 04/17/2014 04:08 AM, Matt . wrote: >> >> Hi Guys, >> >> I'm not able to write a howto yet as we need to >> check how >> this is >> running on high traffic and we are going soon. >> Than, we need >> to test >> some other functions before I can actually write >> something down. >> >> Because this is not all documented well indeed I'm in >> testmode and doing >> some @ life system as reallife environments are >> always >> coming with other >> things than your prefec test. >> >> I cannot say I needed promiscuouity, I did some >> things you would >> normally do on pfsense which fixed that part. Some >> old >> message you >> really need to discard instead of clicking it away >> was >> confusing this test. >> >> >> >> you are not supposed to need the promiscious hook for >> sniffing/mirroring - that's by now part of engine/vdsm >> (at vnic >> level in earlier versions, and at network profile in >> later >> versions iirc) >> >> >> >> 2014-04-17 9:08 GMT+02:00 Dan Kenigsberg >> <dan...@redhat.com <mailto:dan...@redhat.com> >> <mailto:dan...@redhat.com <mailto:dan...@redhat.com >> >> >> <mailto:dan...@redhat.com >> <mailto:dan...@redhat.com> <mailto:dan...@redhat.com >> <mailto:dan...@redhat.com>>>>: >> >> >> >> On Thu, Apr 17, 2014 at 01:11:13AM +0200, Matt >> . wrote: >> > OK, also this is finetuned, but it would be >> nice to >> have some >> more info >> > about the hooks in these cases... it's >> interesting >> as oVirt has >> the right >> > settings to start with but we need to know >> what we >> need to set >> when we have >> > a setup like this for an example. >> >> Could you explain what you have done, and what >> do you >> need promiscuouity >> for? oVirt has "port mirroring" that allows to >> mirror >> ip traffic from >> one vm network to another. >> >> > >> > >> > 2014-04-17 0:35 GMT+02:00 Matt . >> <yamakasi....@gmail.com >> <mailto:yamakasi....@gmail.com> <mailto:yamakasi....@gmail.com >> <mailto:yamakasi....@gmail.com>__> >> <mailto:yamakasi....@gmail.com >> <mailto:yamakasi....@gmail.com> >> <mailto:yamakasi....@gmail.com >> <mailto:yamakasi....@gmail.com>__>__>>: >> >> >> >> > >> > > Traffic issues are solved, but the >> advertising in >> not that well. >> > > >> > > I see on ESXi (vSphere) that you need to >> enable >> "Promiscuous >> Mode", but >> > > how on oVirt ? >> > > >> > > >> http://www.blissfulidiot.com/____2013/11/using-carp-with-___ >> _vmware-esxi.html >> <http://www.blissfulidiot.com/__2013/11/using-carp-with-__ >> vmware-esxi.html> >> >> >> >> <http://www.blissfulidiot.com/__2013/11/using-carp-with-__ >> vmware-esxi.html >> <http://www.blissfulidiot.com/2013/11/using-carp-with- >> vmware-esxi.html>> >> > > >> > > Do I need the vdsm-hook-promisc for it ? >> as I need >> to make real >> settings >> > > on a VM there I think the vswitch only >> needs the mode. >> > > >> > > Information is welcome! >> >> >> >> >> ___________________________________________________ >> Users mailing list >> Users@ovirt.org <mailto:Users@ovirt.org> <mailto:Users@ovirt.org >> <mailto:Users@ovirt.org>> >> http://lists.ovirt.org/____mailman/listinfo/users >> <http://lists.ovirt.org/__mailman/listinfo/users> >> <http://lists.ovirt.org/__mailman/listinfo/users >> <http://lists.ovirt.org/mailman/listinfo/users>> >> >> >> >> >> >> >> >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users