On Fri, Aug 15, 2014 at 11:28:58AM +0200, Gianluca Cecchi wrote: > Hello, > I'm configuring an all-in-one environment in a Qemu-KVM VM with CentOS 6.5 > using nested virtualization. > All seems ok except the hypervisor part that goes in timeout during setup > and after reboot remains in "Unassigned" state. > > I notice that under /etc/sysconfig/network-scripts directory I don't have > the ifcfg-ovirtmgmt file but only the old ifcfg-eth0 and in fact I only > have bridge > > [root@ovirtita ~]# brctl show > bridge name bridge id STP enabled interfaces > ;vdsmdummy; 8000.000000000000 no > > Ha anything changed for master and ovirtmgmt network or does this mean that > during setup something has gone wrong and that I can try to manually create > ovirtmgmt bridge config...? > > If this can interfer, in my case I don't have dns set up but only entry in > /etc/hosts. > With previous versions and this one I got a warning but previously this > didn't compromise hypervisor part in all-in-one environments.. > > engine-setup log > https://drive.google.com/file/d/0BwoPbcrMv8mvQVRyZXFqdFpCbnM/edit?usp=sharing > > host deploy (on itself) part: > https://drive.google.com/file/d/0BwoPbcrMv8mvLXhlMl9qcWhqTlU/edit?usp=sharing
ifcfg-ovirtmgmt network should be found on disk after a successful installation of a host. However, if network configuration phase fails, ifcfg files should be reverted to their original values. Could you see your super/vdsm.log if that is the case? Could you explain when did "hypervisor part goes in timeout". Can you correlate this to something in vdsm.log? Dan. _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
