Il 19/09/2014 14:32, Stefan Wendler ha scritto:
> Hi there.
>
> I'm trying to install a hosted-engine on our second node (fist engine runs on
> node1).
>
> But I always get the message:
>
> [ ERROR ] Cannot automatically add the host to the Default cluster: Cannot
> add Host. Host with the same address already exists.
>
> I'm not entirely sure what I have to do when this message comes, so I just
> press ENTER:
>
> ####### To continue make a selection from the options below: (1) Continue
> setup - engine installation is complete (2) Power off and restart the
> VM (3) Abort setup
>
> (1, 2, 3)[1]: ########
>
> Is there any other interaction required prior to selecting "1"?
>
> In the Web Gui I get the following message:
>
> X Adding new Host hosted_engine_2 to Cluster Default
>
> Here is the console output:
>
> # hosted-engine --deploy [ INFO ] Stage: Initializing Continuing will
> configure this host for serving as hypervisor and create a VM where you
> have to install oVirt Engine afterwards. Are you sure you want to continue?
> (Yes, No)[Yes]: [ INFO ] Generating a temporary VNC password. [ INFO
> ] Stage: Environment setup Configuration files: [] Log file:
> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140919141012-k2lag6.log
> Version: otopi-1.2.3 (otopi-1.2.3-1.el6) [ INFO ]
> Hardware supports virtualization [ INFO ] Bridge ovirtmgmt already created [
> INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs
> detection [ INFO ] Stage: Environment setup [ INFO ] Stage: Environment
> customization
>
> --== STORAGE CONFIGURATION ==--
>
> During customization use CTRL-D to abort. Please specify the storage you
> would like to use (nfs3, nfs4)[nfs3]: Please specify the full shared
> storage connection path to use (example: host:/path): <some address>:/volume1
> The specified storage location already contains a data domain. Is
> this an additional host setup (Yes, No)[Yes]? [ INFO ] Installing on
> additional host Please specify the Host ID [Must be integer, default: 2]:
> The Host ID is already known. Is this a re-deployment on an additional host
> that was previously set up (Yes, No)[Yes]?
>
> --== SYSTEM CONFIGURATION ==--
>
> [WARNING] A configuration file must be supplied to deploy Hosted Engine on an
> additional host. The answer file may be fetched from the first host
> using scp. If you do not want to download it automatically you can abort the
> setup answering no to the following question. Do you want to scp the
> answer file from the first host? (Yes, No)[Yes]: Please provide the FQDN or
> IP of the first host: <node1.domain> Enter 'root' user password for
> host <node1.domain>: [ INFO ] Answer file successfully downloaded
>
> --== NETWORK CONFIGURATION ==--
>
> The following CPU types are supported by this host: - model_Westmere: Intel
> Westmere Family - model_Nehalem: Intel Nehalem Family - model_Penryn:
> Intel Penryn Family - model_Conroe: Intel Conroe Family
>
> --== HOSTED ENGINE CONFIGURATION ==--
>
> Enter the name which will be used to identify this host inside the
> Administrator Portal [hosted_engine_2]: Enter 'admin@internal' user password
> that will be used for accessing the Administrator Portal: Confirm
> 'admin@internal' user password: [ INFO ] Stage: Setup validation
>
> --== CONFIGURATION PREVIEW ==--
>
> Engine FQDN : engine.domain Bridge name
> : ovirtmgmt SSH daemon port : 22 Gateway
> address : <some address> Host name for web application
> : hosted_engine_2 Host ID : 2 Image
> size GB : 25 Storage connection : <some
> address>:/volume1 Console type : vnc Memory
> size MB : 8192 MAC address :
> 00:16:3e:3b:8d:66 Boot type : disk Number of
> CPUs : 2 CPU Type :
> model_Westmere
>
> Please confirm installation settings (Yes, No)[No]: yes [ ERROR ] Invalid
> value
>
> Please confirm installation settings (Yes, No)[No]: Yes [ INFO ] Stage:
> Transaction setup [ INFO ] Stage: Misc configuration [ INFO ] Stage:
> Package installation [ INFO ] Stage: Misc configuration [ INFO ]
> Configuring libvirt [ INFO ] Configuring VDSM [ INFO ] Starting vdsmd [ INFO
> ] Waiting for VDSM hardware info [ INFO ] Waiting for VDSM hardware info [
> INFO ] Connecting Storage Domain [ INFO ] Configuring VM [ INFO ]
> Updating hosted-engine configuration [ INFO ] Stage: Transaction commit [
> INFO ] Stage: Closing up To continue make a selection from the
> options below: (1) Continue setup - engine installation is complete (2) Power
> off and restart the VM (3) Abort setup
>
> (1, 2, 3)[1]: [ INFO ] Engine replied: DB Up!Welcome to Health Status! [
> ERROR ] Cannot automatically add the host to the Default cluster:
> Cannot add Host. Host with the same address already exists. [ INFO ] Waiting
> for the host to become operational in the engine. This may take
> several minutes... [ INFO ] Still waiting for VDSM host to become
> operational... [ INFO ] Still waiting for VDSM host to become operational...
>
> And the stacktrace from the logs:
>
> 2014-09-19 14:14:07 DEBUG
> otopi.plugins.ovirt_hosted_engine_setup.engine.add_host add_host._closeup:438
> Cannot add the host to the Default
> cluster Traceback (most recent call last): File
> "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/engine/add_host.py",
> line 432, in _closeup
> override_iptables=True, File
> "/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/brokers.py", line
> 9779, in add headers={"Expect":expect,
> "Correlation-Id":correlation_id} File
> "/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/proxy.py", line 88,
> in add return
> self.request('POST', url, body, headers) File
> "/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/proxy.py", line
> 118, in request
> persistent_auth=self._persistent_auth) File
> "/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/proxy.py", line
> 140, in __doRequest
> persistent_auth=persistent_auth File
> "/usr/lib/python2.6/site-packages/ovirtsdk/web/connection.py", line 134, in
> doRequest raise RequestError,
> response RequestError: status: 409 reason: Conflict detail: Cannot add Host.
> Host with the same address already exists. 2014-09-19 14:14:07
> ERROR otopi.plugins.ovirt_hosted_engine_setup.engine.add_host
> add_host._closeup:445 Cannot automatically add the host to the Default
> cluster:
> Cannot add Host. Host with the same address already exists.
Looks like you engine has already one host with an IP address which is the same
on your second node.
Looking at your setup console above, I see:
The Host ID is already known. Is this a re-deployment on an additional host
that was previously set up (Yes, No)[Yes]?
Did you remove the host with id2 from the engine before trying to re-deploy it
using (probably) the same IP address?
>
>
> Cheers, Stefan
>
>
>
> _______________________________________________ Users mailing list
> [email protected] http://lists.ovirt.org/mailman/listinfo/users
>
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
