You can refer http://www.ovirt.org/Change_network_interface_for_Gluster
Thanks, Kanagaraj ----- Original Message ----- > From: "Thomas Keppler (PEBA)" <[email protected]> > To: [email protected] > Sent: Thursday, October 9, 2014 7:36:51 PM > Subject: [ovirt-users] Running a Gluster volume off of a seperate network > interface and managing it via the oVirt > engine Web-GUI > > Hello! > > I have a rather quick question on behalf of GlusterFS. My Nodes are set up so > that they have two NICs, four ports. The NIC that is additionally installed > to the internal motherboard's NIC is a 10Gbps one that I want to use for > Gluster-Communication in the GlusterCluster. > > Now, I could just create a plain old Gluster Volume and run everything off of > the terminal and be good with it but that's really not what I want to do! I > want to manage as much as possible through the oVirt engine and I saw it's > possible to manage Gluster Volumes, too. > If I try to create one there though, I can only see the IP addresses I used > to communicate with oVirt (on the internal 1Gbps NIC). > > I have tried creating another network and bound all my nodes to it - still no > success. > > Any ideas how I can do this? > > -- > Best regards > Thomas Keppler > > _______________________________________________ > Users mailing list > [email protected] > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
