Looks like an openvpn config issue and not a ovirt issue from this. 192.168.124.1 is not in the same network as 192.168.124.200/25 mostly, try 192.168.124.129.
> On Oct 18, 2014, at 7:45 AM, Phil Daws <[email protected]> wrote: > > Hello: > > have installed oVirt 3.5 VDSM on a CentOS 7 node and then OpenVPN. The > problem I have is that when I start OpenVPN I receive the message: > > Oct 18 13:29:50 kvm01 openvpn[4159]: /usr/sbin/ip link set dev tun0 up mtu > 1500 > Oct 18 13:29:50 kvm01 openvpn[4159]: /usr/sbin/ip addr add dev tun0 > 192.168.124.200/25 broadcast 192.168.124.255 > Oct 18 13:29:50 kvm01 openvpn[4159]: /usr/sbin/ip route add 192.168.0.0/16 > via 192.168.124.1 > Oct 18 13:29:50 kvm01 openvpn[4159]: ERROR: Linux route add command failed: > external program exited with error status: 2 > > and if I run the route command manually: > > [root@kvm01 sysconfig]# /usr/sbin/ip route add 192.168.0.0/16 via > 192.168.124.1 > RTNETLINK answers: No such process > > It would appear the tunnel is up: > > [root@kvm01 sysconfig]# ip add ls > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > valid_lft forever preferred_lft forever > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN > link/ether f2:c9:ce:e5:ac:32 brd ff:ff:ff:ff:ff:ff > 3: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master ovirtmgmt > state UP qlen 1000 > link/ether c8:1f:66:c4:2c:76 brd ff:ff:ff:ff:ff:ff > inet6 fe80::ca1f:66ff:fec4:2c76/64 scope link > valid_lft forever preferred_lft forever > 4: em2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 > link/ether c8:1f:66:c4:2c:77 brd ff:ff:ff:ff:ff:ff > 6: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > link/ether 46:af:6e:9a:1e:4b brd ff:ff:ff:ff:ff:ff > 8: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state > UP > link/ether c8:1f:66:c4:2c:76 brd ff:ff:ff:ff:ff:ff > inet XXX.XXX.XXX.XXX/23 brd 88.150.253.255 scope global ovirtmgmt > valid_lft forever preferred_lft forever > inet6 fe80::ca1f:66ff:fec4:2c76/64 scope link > valid_lft forever preferred_lft forever > 10: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast > state UNKNOWN qlen 100 > link/none > inet 192.168.124.200/25 brd 192.168.124.255 scope global tun0 > valid_lft forever preferred_lft forever > > Any thoughts as to why the route will not work ? Rationale for this approach > is its a cloud server and wish to use a private network to reach the install > VMs on that node. > > Thanks, Phil > > _______________________________________________ > Users mailing list > [email protected] > http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
