Hi Eli,
The compatibility version of the cluster in which the proxy host resides is 3.5 . Kind regards, Wout ----- Oorspronkelijk bericht ----- Van: "Eli Mesika" <emes...@redhat.com> Aan: "Wout Peeters" <w...@unix-solutions.be> Cc: users@ovirt.org Verzonden: Maandag 8 december 2014 22:06:23 Onderwerp: Re: [ovirt-users] oVirt power management issue ----- Original Message ----- > From: "Wout Peeters" <w...@unix-solutions.be> > To: emes...@redhat.com > Cc: users@ovirt.org > Sent: Monday, December 8, 2014 12:01:10 PM > Subject: Fwd: [ovirt-users] oVirt power management issue > > > Hi Eli, > > Thanks for the response. Attached are engine.log and vdsm.log from the host > serving as a proxy. Our CPUs are Intel Nehalem-based. We encounter the same > problem using apc_snmp. This is the output of the rpm-commands: > > rpm -qa | grep vdsm > > vdsm-yajsonrpc-4.16.7-1.gitdb83943.el7.noarch > vdsm-4.16.7-1.gitdb83943.el7.x86_64 > vdsm-xmlrpc-4.16.7-1.gitdb83943.el7.noarch > vdsm-python-zombiereaper-4.16.7-1.gitdb83943.el7.noarch > vdsm-jsonrpc-4.16.7-1.gitdb83943.el7.noarch > vdsm-cli-4.16.7-1.gitdb83943.el7.noarch > vdsm-python-4.16.7-1.gitdb83943.el7.noarch > > > rpm -qa | grep fence-agents > > fence-agents-hpblade-4.0.2-21.el7.x86_64 > fence-agents-cisco-ucs-4.0.2-21.el7.x86_64 > fence-agents-eaton-snmp-4.0.2-21.el7.x86_64 > fence-agents-apc-4.0.2-21.el7.x86_64 > fence-agents-rsb-4.0.2-21.el7.x86_64 > fence-agents-ilo-mp-4.0.2-21.el7.x86_64 > fence-agents-ifmib-4.0.2-21.el7.x86_64 > fence-agents-cisco-mds-4.0.2-21.el7.x86_64 > fence-agents-all-4.0.2-21.el7.x86_64 > fence-agents-common-4.0.2-21.el7.x86_64 > fence-agents-rhevm-4.0.2-21.el7.x86_64 > fence-agents-eps-4.0.2-21.el7.x86_64 > fence-agents-bladecenter-4.0.2-21.el7.x86_64 > fence-agents-intelmodular-4.0.2-21.el7.x86_64 > fence-agents-apc-snmp-4.0.2-21.el7.x86_64 > fence-agents-ilo2-4.0.2-21.el7.x86_64 > fence-agents-ipmilan-4.0.2-21.el7.x86_64 > fence-agents-scsi-4.0.2-21.el7.x86_64 > fence-agents-brocade-4.0.2-21.el7.x86_64 > fence-agents-wti-4.0.2-21.el7.x86_64 > fence-agents-kdump-4.0.2-21.el7.x86_64 > fence-agents-ibmblade-4.0.2-21.el7.x86_64 > fence-agents-ipdu-4.0.2-21.el7.x86_64 > fence-agents-vmware-soap-4.0.2-21.el7.x86_64 > fence-agents-drac5-4.0.2-21.el7.x86_64 > > > Kind regards, > > Wout Have seen few resolved bugs on that , can you please let us know what is the cluster level version in which the proxy host resides ? > > > ----- Oorspronkelijk bericht ----- > Van: "Eli Mesika" <emes...@redhat.com> > Aan: "Wout Peeters" <w...@unix-solutions.be> > Cc: users@ovirt.org > Verzonden: Maandag 8 december 2014 00:17:13 > Onderwerp: Re: [ovirt-users] oVirt power management issue > > > > ----- Original Message ----- > > From: "Eli Mesika" <emes...@redhat.com> > > To: "Wout Peeters" <w...@unix-solutions.be> > > Cc: users@ovirt.org > > Sent: Monday, December 8, 2014 1:14:54 AM > > Subject: Re: [ovirt-users] oVirt power management issue > > > > > > > > ----- Original Message ----- > > > From: "Wout Peeters" <w...@unix-solutions.be> > > > To: users@ovirt.org > > > Sent: Friday, December 5, 2014 12:50:24 PM > > > Subject: [ovirt-users] oVirt power management issue > > > > > > Hi, > > > > > > We're trying to set up an oVirt configuration with an oVirt-controller > > > (CentOS 6), iSCSI-storage (Dell MD3200i) and 3 vm-hosts (CentOS 7) > > > powered > > > by 2 APC PDUs. Testing the Power Management settings in the web GUI, we > > > get > > > the following message: "Test Succeeded, unknown." The oVirt engine log > > > outputs the following: > > > > > > 2014-12-05 11:23:00,872 INFO > > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > > > (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null, Custom > > > Event > > > ID: -1, Message: Host vm-02 from data center XXXX was chosen as a proxy > > > to > > > execute Status command on Host vm-03. > > > 2014-12-05 11:23:00,879 INFO [org.ovirt.engine.core.bll.FenceExecutor] > > > (ajp--127.0.0.1-8702-7) Using Host vm-02 from data center XXXX as proxy > > > to > > > execute Status command on Host > > > 2014-12-05 11:23:00,904 INFO [org.ovirt.engine.core.bll.FenceExecutor] > > > (ajp--127.0.0.1-8702-7) Executing <Status> Power Management command, > > > Proxy > > > Host:vm-02, Agent:apc, Target Host:, Management IP:***.***.***.***, > > > User:apc, Options:, Fencing policy:null > > > 2014-12-05 11:23:00,930 INFO > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] > > > (ajp--127.0.0.1-8702-7) START, FenceVdsVDSCommand(HostName = vm-02, > > > HostId > > > = > > > 071554fc-eed2-4e8f-b6bc-041248d0eaa5, targetVdsId = > > > 67c642ed-0a7a-4e3b-8dd6-32a36df4aea9, action = Status, ip = > > > ***.***.***.***, > > > port = , type = apc, user = apc, password = ******, options = '', policy > > > = > > > 'null'), log id: 2803522 > > > 2014-12-05 11:23:01,137 WARN > > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > > > (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null, Custom > > > Event > > > ID: -1, Message: Power Management test failed for Host vm-03.Done > > > 2014-12-05 11:23:01,138 INFO > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] > > > (ajp--127.0.0.1-8702-7) FINISH, FenceVdsVDSCommand, return: Test > > > Succeeded, > > > unknown, log id: 2803522 > > > 2014-12-05 11:23:01,139 WARN [org.ovirt.engine.core.bll.FenceExecutor] > > > (ajp--127.0.0.1-8702-7) Fencing operation failed with proxy host > > > 071554fc-eed2-4e8f-b6bc-041248d0eaa5, trying another proxy... > > > 2014-12-05 11:23:01,241 INFO > > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > > > (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null, Custom > > > Event > > > ID: -1, Message: Host vm-01 from data center XXXX was chosen as a proxy > > > to > > > execute Status command on Host vm-03. > > > 2014-12-05 11:23:01,244 INFO [org.ovirt.engine.core.bll.FenceExecutor] > > > (ajp--127.0.0.1-8702-7) Using Host vm-01 from data center XXXX as proxy > > > to > > > execute Status command on Host > > > 2014-12-05 11:23:01,246 INFO [org.ovirt.engine.core.bll.FenceExecutor] > > > (ajp--127.0.0.1-8702-7) Executing <Status> Power Management command, > > > Proxy > > > Host:vm-01, Agent:apc, Target Host:, Management IP:***.***.***.***, > > > User:apc, Options:, Fencing policy:null > > > 2014-12-05 11:23:01,273 INFO > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] > > > (ajp--127.0.0.1-8702-7) START, FenceVdsVDSCommand(HostName = vm-01, > > > HostId > > > = > > > c50eb9bf-5294-4d46-813d-7adfcb41d71d, targetVdsId = > > > 67c642ed-0a7a-4e3b-8dd6-32a36df4aea9, action = Status, ip = > > > ***.***.***.***, > > > port = , type = apc, user = apc, password = ******, options = '', policy > > > = > > > 'null'), log id: 2b00de15 > > > 2014-12-05 11:23:01,449 WARN > > > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] > > > (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null, Custom > > > Event > > > ID: -1, Message: Power Management test failed for Host vm-03.Done > > > 2014-12-05 11:23:01,451 INFO > > > [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand] > > > (ajp--127.0.0.1-8702-7) FINISH, FenceVdsVDSCommand, return: Test > > > Succeeded, > > > unknown, log id: 2b00de15 > > > > > > This is the vdsm.log output: > > > > > > JsonRpc (StompReactor)::DEBUG::2014-12-05 > > > 11:34:05,065::stompReactor::98::Broker.StompAdapter::(handle_frame) > > > Handling > > > message <StompFrame command='SEND'> > > > JsonRpcServer::DEBUG::2014-12-05 > > > 11:34:05,067::__init__::504::jsonrpc.JsonRpcServer::(serve_requests) > > > Waiting > > > for request > > > Thread-24996::DEBUG::2014-12-05 11:34:05,069::API::1188::vds::(fenceNode) > > > fenceNode(addr=***.***.***.***,port=,agent=apc,user=apc,passwd=XXXX,action=status,secure=False,options=,policy=None) > > > Thread-24996::DEBUG::2014-12-05 11:34:05,069::utils::738::root::(execCmd) > > > /usr/sbin/fence_apc (cwd None) > > > Thread-24996::DEBUG::2014-12-05 11:34:05,131::utils::758::root::(execCmd) > > > FAILED: <err> = "Failed: You have to enter plug number or machine > > > identification\nPlease use '-h' for usage\n"; <rc> = 1 > > > Thread-24996::DEBUG::2014-12-05 11:34:05,131::API::1143::vds::(fence) rc > > > 1 > > > inp agent=fence_apc > > > ipaddr=***.***.***.*** > > > login=apc > > > action=status > > > passwd=XXXX > > > out [] err ['Failed: You have to enter plug number or machine > > > identification', "Please use '-h' for usage"] > > > > > > The 'port' and 'options' fields show up as empty, even if we enter '22' > > > or > > > 'port=22'. We did enter the slot number as well. > > > > > > Entering the fence_apc command manually, we get: > > > > > > fence_apc -a ***.***.***.*** -l apc -p ****** -o status -n 1 -x > > > Status: ON > > > > > > Anyone have an idea what could be the problem? > > > > Hi, first please attach a full engine log and vdsm.log on the machine that > > served as a proxy for this operation > > Please also attach the result of the following on the machine that served > > as > > a proxy for this operation > > > > rpm -qa | grep vdsm > > rpm -qa | grep fence-agents > > > > Is that a PowerPC machine ??? > > also, please try to use the apc_snmp instead of apc and see if that resolved > the problem > > > > > Thanks > > Eli Mesika > > > > > > > > > > > > > > > > > Thanks for your time and kind regards, > > > > > > Wout > > > > > > _______________________________________________ > > > Users mailing list > > > Users@ovirt.org > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > _______________________________________________ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users