Answering to message 2 (bond mode 4):
* Mode 4 (802.3ad) This mode is known as Dynamic Link Aggregation mode. It
creates aggregation groups that share the same speed and duplex settings. This
mode requires a switch that supports IEEE 802.3ad Dynamic link.
Please try configuring your 4 Cisco ports as port-channel/channel-group in
active with LACP enabled capability on its ports.
Thanks in advance.
Best regards,
Nikolai
____________________
Nikolai Sednev
Senior Quality Engineer at Compute team
Red Hat Israel
34 Jerusalem Road,
Ra'anana, Israel 43501
Tel: +972 9 7692043
Mobile: +972 52 7342734
Email: [email protected]
IRC: nsednev
----- Original Message -----
From: [email protected]
To: [email protected]
Sent: Wednesday, December 10, 2014 12:57:20 PM
Subject: Users Digest, Vol 39, Issue 50
Send Users mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.ovirt.org/mailman/listinfo/users
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Users digest..."
Today's Topics:
1. Fwd: Fwd: run ovirt-shell script like background job -
problem (Grzegorz Szypa)
2. oVirt bonding mode4 + cisco 2960 XR (??????? ????????)
3. Re: ??: 3.5 hosted engine: 2nd host Cannot acquire bridge
address (Sandro Bonazzola)
4. [QE][ACTION REQUIRED] oVirt 3.6.0 status (Sandro Bonazzola)
5. [QE][ACTION REQUIRED] oVirt 3.5.1 RC status (Sandro Bonazzola)
6. Re: [QE][ACTION REQUIRED] oVirt 3.5.1 RC status
(Francesco Romani)
7. Re: Adding domain to oVirt to 3.5 issue (Alon Bar-Lev)
----------------------------------------------------------------------
Message: 1
Date: Wed, 10 Dec 2014 07:33:32 +0100
From: Grzegorz Szypa <[email protected]>
To: [email protected]
Subject: [ovirt-users] Fwd: Fwd: run ovirt-shell script like
background job - problem
Message-ID:
<CACL97+jXMDgCqCyWB79E=MaMwEn1Xx3ew4BiRTHYtfbphy=v...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Problem is solved.
It must be install this:
yum update packages
not like this
rpm -i *.rpm
---------- Forwarded message ----------
From: Grzegorz Szypa <[email protected]>
Date: 2014-12-09 20:42 GMT+01:00
Subject: Re: [ovirt-users] Fwd: run ovirt-shell script like background job
- problem
To: Juan Hern?ndez <[email protected]>
So i have a question:
When i install:
rpm -i ovirt-engine-sdk-python-3.5.0.7-1.el6.noarch.rpm
ovirt-engine-cli-3.5.0.5-1.el6.noarch.rpm
i got error conflict with current package ovirt-engine-3.4.x
It was all-in-one instalation in one server.
2014-12-09 10:32 GMT+01:00 Juan Hern?ndez <[email protected]>:
> On 12/08/2014 08:05 PM, Grzegorz Szypa wrote:
> > So, i have a question.
> >
> > Is ovirt-engine-cli-3.5.0.2-1.el6.noarch compatible in ovirt-engine-3.4?
> >
> > Can install ovirt-engine-cli-3.5 on ovirt-engine-cli-3.4 and using him
> > with landscape based on ovirt 3.4 ??
> >
>
> Yes, versions 3.5.x of ovirt-engine-cli and ovirt-engine-sdk-python (you
> will need both) are compatible with version 3.4 of the engine.
>
> > 2014-12-07 17:33 GMT+01:00 Juan Hern?ndez <[email protected]
> > <mailto:[email protected]>>:
> >
> > On 12/07/2014 05:05 PM, Grzegorz Szypa wrote:
> > > Hi,
> > >
> > > I have a problem with running ovirt-shell script, that it starting
> > VMs.
> > > In dialog mode it's fine, but in background no :(
> > >
> > > Example script:
> > > ovirt-shell -E 'action vm WinSrv2012r2 start'
> > >
> > > I start this job in cron as root.
> > >
> > >
> > > Have somebody idea??
> > >
> > > --
> > > G.Sz.
> > >
> >
> > We used to have bug that made ovirt-shell fail when there wasn't a
> tty
> > available (like when running from cron):
> >
> > ovirt-shell cannot run in cron (/dev/tty missing)
> > https://bugzilla.redhat.com/1119412
> >
> > That was fixed in version 3.5.0.2, so make sure that you have at
> least
> > that version.
> >
> > If you still have problems please share the output of the ovirt-shell
> > command.
> >
> > --
> > Direcci?n Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta
> > 3?D, 28016 Madrid, Spain
> > Inscrita en el Reg. Mercantil de Madrid ? C.I.F. B82657941 - Red Hat
> > S.L.
> >
> >
> >
> >
> > --
> > G.Sz.
> >
> >
> >
> > --
> > G.Sz.
> >
> >
> > _______________________________________________
> > Users mailing list
> > [email protected]
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
>
> --
> Direcci?n Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta
> 3?D, 28016 Madrid, Spain
> Inscrita en el Reg. Mercantil de Madrid ? C.I.F. B82657941 - Red Hat S.L.
>
--
G.Sz.
--
G.Sz.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.ovirt.org/pipermail/users/attachments/20141210/76801a84/attachment-0001.html>
------------------------------
Message: 2
Date: Wed, 10 Dec 2014 10:20:01 +0300
From: ??????? ???????? <[email protected]>
To: "[email protected]" <[email protected]>
Subject: [ovirt-users] oVirt bonding mode4 + cisco 2960 XR
Message-ID:
<CAE85BH-VkK0PsdS=wqzmp61nyx2b-ce09toek8npcuqyban...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Hi, community!
I have made bond0 mode4 (eth0+eth1+eth2+eth3) by oVirt portal. It's work
well on CentOS 7 node.
How I can setup my cisco 2960 XR switch for work with this bond0 for
loadbalancing + aggregation (802.3ad)?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.ovirt.org/pipermail/users/attachments/20141210/9fcded22/attachment-0001.html>
------------------------------
Message: 3
Date: Wed, 10 Dec 2014 08:37:32 +0100
From: Sandro Bonazzola <[email protected]>
To: Robert Story <[email protected]>
Cc: "[email protected]" <[email protected]>
Subject: Re: [ovirt-users] ??: 3.5 hosted engine: 2nd host Cannot
acquire bridge address
Message-ID: <[email protected]>
Content-Type: text/plain; charset=UTF-8
Il 09/12/2014 20:16, Robert Story ha scritto:
> On Tue, 09 Dec 2014 10:33:51 +0100 Sandro wrote:
> SB> > Looking at setup logs, you have:
> SB> > OVEHOSTED_NETWORK/bridgeIf=str:'eth1.79'
> SB> > [...]
> SB> > which seems to fail matching REGEXP:
> SB> >
> SB> > _ADDRESS_RE = re.compile(
> SB> > flags=re.VERBOSE,
> SB> > pattern=r"""
> SB> > \s+
> SB> > inet
> SB> > \s
> SB> > (?P<address>\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})
> SB> > .+
> SB> > \s+
> SB> > (?P<interface>\w+)
> SB> > $
> SB> > """
> SB> > )
> SB> >
> SB> > I guess the match is failing due to the '.' in 'eth1.79'
> SB>
> SB> If you haven't already opened a BZ about it, please open one, thanks
>
> https://bugzilla.redhat.com/show_bug.cgi?id=1172287
>
Thanks
>
> Robert
>
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
------------------------------
Message: 4
Date: Wed, 10 Dec 2014 09:02:13 +0100
From: Sandro Bonazzola <[email protected]>
To: "[email protected]" <[email protected]>, "[email protected]"
<[email protected]>
Subject: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.6.0 status
Message-ID: <[email protected]>
Content-Type: text/plain; charset=iso-8859-15
Hi,
Release criteria discussion has been closed and wiki has been updated
accordingly by Brian [1][2].
Release management for 3.6.0 [3] has been updated with the accepted changes in
release criteria.
ACTION: Feature proposed for 3.6.0 must now be collected in the 3.6 Google doc
[4] and reviewed by maintainers.
Finished the review process, the remaining key milestones for this release will
be scheduled.
For reference, external project schedules we're tracking are:
Fedora 21: 2014-12-09 (RELEASED)
Fedora 22: no earlier than 2015-05-19
Foreman 1.8.0: 2015-03-01
GlusterFS 3.7: 2015-04-29
OpenStack Kilo: 2015-04-30
Two different proposals have been made about above scheduling [5]:
1) extend the cycle to 10 months for allowing to include a large feature set
2) reduce the cycle to less than 6 months and split features over 3.6 and 3.7
and we can also add
3) keep current 6 months cycle
The tracker bug for 3.6.0 [6] currently shows no blockers.
There are 460 bugs [7] targeted to 3.6.0.
Excluding node and documentation bugs we have 436 bugs [8] targeted to 3.6.0.
[1] http://www.ovirt.org/Release_Criteria_Template
[2] http://www.ovirt.org/Release_process
[3] http://www.ovirt.org/OVirt_3.6_Release_Management
[4] http://goo.gl/9X3G49
[5] http://lists.ovirt.org/pipermail/users/2014-November/028875.html
[6] https://bugzilla.redhat.com/show_bug.cgi?id=1155425
[7] http://goo.gl/zwkF3r
[8] http://goo.gl/ZbUiMc
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
------------------------------
Message: 5
Date: Wed, 10 Dec 2014 09:07:54 +0100
From: Sandro Bonazzola <[email protected]>
To: "[email protected]" <[email protected]>, "[email protected]"
<[email protected]>
Subject: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.1 RC status
Message-ID: <[email protected]>
Content-Type: text/plain; charset=iso-8859-15
Hi,
We have still blockers for oVirt 3.5.1 RC release so we need to postpone it
until they'll be fixed.
ACTION: Being so near to winter's holidays we need to discuss the new tentative
date for RC in today sync meeting.
The bug tracker [1] shows 2 open blocker:
Bug ID Whiteboard Status Summary
1160846 sla NEW Can't add disk to VM without specifying disk profile when the
storage domain has more than one disk profile
1168709 virt NEW Hosted Engine VM is listed as paused after upgrading from
3.4.4 to 3.5.1 snapshot
In order to stabilize the release a new branch ovirt-engine-3.5.1 will be
created from the same git hash used for composing the RC.
- ACTION: assignee please provide ETA on above blockers
Maintainers:
- Please be sure that 3.5 snapshot allow to create VMs
- Please be sure that no pending patches are going to block the release
- If any patch must block the RC release please raise the issue as soon as
possible.
There are still 63 bugs [2] targeted to 3.5.1.
Excluding node and documentation bugs we still have 42 bugs [3] targeted to
3.5.1.
Maintainers / Assignee:
- Please add the bugs to the tracker if you think that 3.5.1 should not be
released without them fixed.
- ACTION: Please update the target to 3.5.2 or later for bugs that won't be in
3.5.1:
it will ease gathering the blocking bugs for next releases.
- ACTION: Please fill release notes, the page has been created here [4]
Community:
- If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test
page [5]
[1] http://bugzilla.redhat.com/1155170
[2] http://goo.gl/7G0PDV
[3] http://goo.gl/6gUbVr
[4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes
[5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing
--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com
------------------------------
Message: 6
Date: Wed, 10 Dec 2014 03:12:20 -0500 (EST)
From: Francesco Romani <[email protected]>
To: Sandro Bonazzola <[email protected]>
Cc: [email protected], [email protected]
Subject: Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.1 RC status
Message-ID:
<[email protected]>
Content-Type: text/plain; charset=utf-8
----- Original Message -----
> From: "Sandro Bonazzola" <[email protected]>
> To: [email protected], [email protected]
> Sent: Wednesday, December 10, 2014 9:07:54 AM
> Subject: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.1 RC status
>
> Hi,
> We have still blockers for oVirt 3.5.1 RC release so we need to postpone it
> until they'll be fixed.
> ACTION: Being so near to winter's holidays we need to discuss the new
> tentative date for RC in today sync meeting.
>
> The bug tracker [1] shows 2 open blocker:
> Bug ID Whiteboard Status Summary
> 1160846 sla NEW Can't add disk to VM without specifying disk profile when
> the storage domain has more than one disk profile
> 1168709 virt NEW Hosted Engine VM is listed as paused after upgrading from
> 3.4.4 to 3.5.1 snapshot
>
> In order to stabilize the release a new branch ovirt-engine-3.5.1 will be
> created from the same git hash used for composing the RC.
>
> - ACTION: assignee please provide ETA on above blockers
1168709 - patch seems simple, posted and verified (BZ entry just updated to
POST).
needs review. ETA for merge: definitely within the week, worst case.
Bests,
--
Francesco Romani
RedHat Engineering Virtualization R & D
Phone: 8261328
IRC: fromani
------------------------------
Message: 7
Date: Wed, 10 Dec 2014 05:57:14 -0500 (EST)
From: Alon Bar-Lev <[email protected]>
To: Juan Jose <[email protected]>
Cc: users <[email protected]>
Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
Message-ID:
<[email protected]>
Content-Type: text/plain; charset=utf-8
----- Original Message -----
> From: "Juan Jose" <[email protected]>
> To: "Alon Bar-Lev" <[email protected]>, "Yair Zaslavsky"
> <[email protected]>
> Sent: Wednesday, December 10, 2014 12:30:34 PM
> Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
>
> Hello Alon and Yair,
>
> Many thanks for your help, finally It works properly. My problem, after
> last Alon indications was that my user "Juanjo" was defined with SuperUser
> role in the previous domain configuration. I have loggen in with admin user
> from internal and I have removed old configuration and I have configured my
> user "Juanjo" with all administrators roles in folder "Permission" and I
> can log in in administration portal without problems and it works properly.
>
> My final configuration I have is an emulated *AD based on Samba 4* and the
> final configuration files are:
Good!
So samba is not emulating active directory entirely :)
But good to know it is working.
Please also checkout group membership.
> ovirt-engine-extension-aaa-ldap.noarch
> 1.0.1-0.0.master.20141209141731.git0437701.el6
this fix for samba ad will be released in 1.0.1.
>
> */etc/ovirt-engine/extensions.d/siee-local-authn.properties*:
>
> ovirt.engine.extension.name = siee-local-authn
> ovirt.engine.extension.bindings.method = jbossmodule
> ovirt.engine.extension.binding.jbossmodule.module =
> org.ovirt.engine-extensions.aaa.ldap
> ovirt.engine.extension.binding.jbossmodule.class =
> org.ovirt.engineextensions.aaa.ldap.AuthnExtension
> ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authn
> ovirt.engine.aaa.authn.profile.name = siee
> ovirt.engine.aaa.authn.authz.plugin = siee-local-authz
> config.profile.file.1 = /etc/ovirt-engine/aaa/siee.properties
>
> */etc/ovirt-engine/extensions.d/siee-local-authz.properties*:
>
> ovirt.engine.extension.name = siee-local-authz
> ovirt.engine.extension.bindings.method = jbossmodule
> ovirt.engine.extension.binding.jbossmodule.module =
> org.ovirt.engine-extensions.aaa.ldap
> ovirt.engine.extension.binding.jbossmodule.class =
> org.ovirt.engineextensions.aaa.ldap.AuthzExtension
> ovirt.engine.extension.provides = org.ovirt.engine.api.extensions.aaa.Authz
> config.profile.file.1 = /etc/ovirt-engine/aaa/siee.properties
>
> */etc/ovirt-engine/aaa/siee.properties*:
>
> include = <ad.properties>
>
> #
> # Active directory domain name.
> #
> vars.domain = siee.local
>
> #
> # Search user and its password.
> #
> vars.user = searcher@${global:vars.domain}
> vars.password = xxxx
>
> #
> # Optional DNS servers, if enterprise
> # DNS server cannot resolve the domain srvrecord.
> #
> #vars.dns = dns://dc1.${global:vars.domain} dns://dc2.${global:vars.domain}
>
> pool.default.serverset.type = srvrecord
> pool.default.serverset.srvrecord.domain = ${global:vars.domain}
> pool.default.auth.simple.bindDN = ${global:vars.user}
> pool.default.auth.simple.password = ${global:vars.password}
>
> # Uncomment if using custom DNS
> #pool.default.serverset.srvrecord.jndi-properties.java.naming.provider.url
> = ${global:vars.dns}
> #pool.default.socketfactory.resolver.uRL = ${global:vars.dns}
>
> # Create keystore, import certificate chain and uncomment
> # if using ssl/tls.
> #pool.default.ssl.startTLS = true
> #pool.default.ssl.truststore.file =
> ${local:_basedir}/${global:vars.domain}.jks
> #pool.default.ssl.truststore.password = changeit
You should enable SSL for production use... as you do not want passwords to be
transmitted in clear.
Not sure how you install ssl on the samba ldap... but once you do, follow the
README instructions[1]
[1]
http://gerrit.ovirt.org/gitweb?p=ovirt-engine-extension-aaa-ldap.git;a=blob;f=README;hb=HEAD#l141
>
> */etc/krb5.conf*:
You are not using kerberos, so there is no reason to configure it for setup to
work.
>
> [logging]
> default = FILE:/var/log/krb5libs.log
> kdc = FILE:/var/log/krb5kdc.log
> admin_server = FILE:/var/log/kadmind.log
>
> [libdefaults]
> default_realm = SIEE.LOCAL
> dns_lookup_realm = true
> dns_lookup_kdc = true
> ticket_lifetime = 24h
> renew_lifetime = 7d
> forwardable = no
> default_tkt_enctypes = arcfour-hmac-md5
> udp_preference_limit = 1
>
> #[realms]
>
> #[domain_realm]
> # .siee.local = SIEE.LOCAL
> # siee.local = SIEE.LOCAL
>
>
> Many thanks again to everybody,
>
> Juanjo.
>
> On Tue, Dec 9, 2014 at 5:31 PM, Alon Bar-Lev <[email protected]> wrote:
>
> >
> >
> > ----- Original Message -----
> > > From: "Juan Jose" <[email protected]>
> > > To: "Alon Bar-Lev" <[email protected]>, "Yair Zaslavsky" <
> > [email protected]>
> > > Sent: Tuesday, December 9, 2014 5:42:56 PM
> > > Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
> > >
> > > Hello Alon,
> > >
> > > In my firsts e-mails I had already said that I have an emulation of AD
> > > based on Samba 4. I have tested the last version ov
> > > ovirt-engine-extension-aaa-ldap package and I think the problem is the
> > same
> > > although the error is "User is not authorized to perform this action".
> > >
> > > I attach the enginle.log.
> >
> > USER_NOT_AUTHORIZED_TO_PERFORM_ACTION means user is not superuser or can
> > manage objects as far as I know.
> >
> > I see [email protected] is trying to login which is CN=siee0
> > siee0,CN=Users,DC=siee,DC=local
> >
> > Login succeeds.
> >
> > I do not see any groups it belongs to.
> >
> > Are you sure you added this user role within the webadmin or that user
> > belongs to groups that were added to engine with such roles?
> >
> > >
> > > In case that the new oVirt version 3.5 doesn't work with an AD emulation
> > > based on Samba 4, is it possible to do user authentication with an
> > OpenLDAP
> > > directly with this 3.5 version?, if it is so, could you give me the link
> > to
> > > the documentation to configure OpenLDAP authentication?
> >
> > Sure, just use the
> > /usr/share/ovirt-engine-extension-aaa-ldap/examples/simple copy recursive
> > into /etc/ovirt-engine, then modify /etc/ovirt-engine/aaa/ldap1.properties
> > set vars.server, vars.user, vars.password.
> >
> > Until 3.5.1 you should also
> > /etc/ovirt-engine/extensions.d/domain1*.properties and replace ../aaa to
> > /etc/ovirt-engine/aaa
> >
> >
> > > Many thanks in advanced,
> > >
> > > Juanjo.
> > >
> > > On Tue, Dec 9, 2014 at 3:16 PM, Alon Bar-Lev <[email protected]> wrote:
> > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > From: "Alon Bar-Lev" <[email protected]>
> > > > > To: "Juan Jose" <[email protected]>
> > > > > Cc: "users" <[email protected]>
> > > > > Sent: Tuesday, December 9, 2014 3:59:33 PM
> > > > > Subject: Re: [ovirt-users] Adding domain to oVirt to 3.5 issue
> > > > >
> > > > > We start over...
> > > > >
> > > > > This is not active directory... it is samba.
> > > > >
> > > > > Attribute(name=vendorName, values={'Samba Team (http://samba.org)'})
> > > > >
> > > > > Only now I realized this, maybe you mentioned it earlier not sure.
> > > > >
> > > > > Of course this was never tested, so probably not working.
> > > > >
> > > > > I see that samba does not return a list of extended operations, I
> > will
> > > > > workaround this and we can see what's else differ from active
> > directory.
> > > >
> > > > Can you please checkout the following rpm[1]?
> > > >
> > > > [1]
> > > >
> > http://jenkins.ovirt.org/job/ovirt-engine-extension-aaa-ldap_master_create-rpms-el6-x86_64_merged/
> >
> > > >
> > >
> >
>
------------------------------
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
End of Users Digest, Vol 39, Issue 50
*************************************
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
