I ended up using the drac5 fence, secure, and cmd_prompt=> This works if I connect to the individual idrac for each blade. I never did get it working from the CMC level, but this way is acceptable.
-Patrick From: Nathanaël Blanchet Date: Friday, March 6, 2015 at 5:11 AM To: "users@ovirt.org<mailto:users@ovirt.org>" Subject: Re: [ovirt-users] Dell DRAC 8 Hi, Did you try with this options? It is intended for the second generation of idrac7 but, it may work for idrac8. ----- Original Message ----- From: "Oved Ourfali" <oourf...@redhat.com><mailto:oourf...@redhat.com> To: "Nathanaël Blanchet" <blanc...@abes.fr><mailto:blanc...@abes.fr> Cc: users@ovirt.org<mailto:users@ovirt.org>, "Eli Mesika" <emes...@redhat.com><mailto:emes...@redhat.com> Sent: Monday, February 2, 2015 7:04:05 PM Subject: Re: [ovirt-users] power management test fails while ipmi command successes We've recently pushed a patch to have lanplus as a default option for drac7. Until then you can set this option explicitly through the additional options in the power management configuration tab in the edit/add host dialog. Please check whether it helps. CC-ing Eli, just in case I've missed something. Please make sure that you have the following in the UI options field (on the Edit dialog PM TAB) privlvl=OPERATOR,lanplus,delay=10 Regards, Oved On Feb 2, 2015 6:10 PM, Nathanaël Blanchet <blanc...@abes.fr><mailto:blanc...@abes.fr> wrote: Hi all, I've just installed two new dell r630 hosts and every thing is alright with vdsm registration, but power management test always fails with ipmi or drac7 item. When I start the manual ipmi command like this "ipmitool -I lanplus -H 10.34.20.45 -U root chassis power status", it always success with "power chassis is on". All of my other dell servers (r710, r620) success on power management test. Is it a known bug? _______________________________________________ Users mailing list Users@ovirt.org<mailto:Users@ovirt.org> http://lists.ovirt.org/mailman/listinfo/users Le 06/03/2015 03:54, Patrick Russell a écrit : Looks like it’s just the CMC, I can use power management on the individual sled DRAC’s using the drac5 fence agent no problem. -Patrick From: Volusion Inc Date: Thursday, March 5, 2015 at 8:22 PM To: "users@ovirt.org<mailto:users@ovirt.org>" Subject: [ovirt-users] Dell DRAC 8 Anyone having success with fencing and DRAC 8 via CMC? We just received a couple Dell FX2 chassis and we’re having trouble getting the fencing agents to work on these. It is a CMC setup similar to the dell blade chassis, but it DRAC version 8. -Patrick _______________________________________________ Users mailing list Users@ovirt.org<mailto:Users@ovirt.org>http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users