----- Original Message ----- > From: "Bob Doolittle" <[email protected]> > To: "Simone Tiraboschi" <[email protected]> > Cc: "users-ovirt" <[email protected]> > Sent: Monday, March 9, 2015 6:26:30 PM > Subject: Re: [ovirt-users] Error during hosted-engine-setup for 3.5.1 on F20 > (Cannot add the host to cluster ... SSH > has failed) > > > On 03/09/2015 12:53 PM, Simone Tiraboschi wrote: > > > > ----- Original Message ----- > >> From: "Bob Doolittle" <[email protected]> > >> To: "Simone Tiraboschi" <[email protected]> > >> Cc: "users-ovirt" <[email protected]> > >> Sent: Monday, March 9, 2015 12:48:37 PM > >> Subject: Re: [ovirt-users] Error during hosted-engine-setup for 3.5.1 on > >> F20 (Cannot add the host to cluster ... SSH > >> has failed) > >> > >> > >> On 03/09/2015 07:12 AM, Simone Tiraboschi wrote: > >>> ----- Original Message ----- > >>>> From: "Bob Doolittle" <[email protected]> > >>>> To: "Simone Tiraboschi" <[email protected]> > >>>> Sent: Monday, March 9, 2015 12:02:49 PM > >>>> Subject: Re: [ovirt-users] Error during hosted-engine-setup for 3.5.1 on > >>>> F20 (Cannot add the host to cluster ... SSH > >>>> has failed) > >>>> > >>>> On Mar 9, 2015 5:23 AM, "Simone Tiraboschi" <[email protected]> wrote: > >>>>> > >>>>> ----- Original Message ----- > >>>>>> From: "Bob Doolittle" <[email protected]> > >>>>>> To: "users-ovirt" <[email protected]> > >>>>>> Sent: Friday, March 6, 2015 9:21:20 PM > >>>>>> Subject: [ovirt-users] Error during hosted-engine-setup for 3.5.1 on > >>>> F20 (Cannot add the host to cluster ... SSH has > >>>>>> failed) > >>>>>> > >>>>>> Hi, > >>>>>> > >>>>>> I'm following the instructions here: > >>>> http://www.ovirt.org/Hosted_Engine_Howto > >>>>>> My self-hosted install failed near the end: > >>>>>> > >>>>>> To continue make a selection from the options below: > >>>>>> (1) Continue setup - engine installation is complete > >>>>>> (2) Power off and restart the VM > >>>>>> (3) Abort setup > >>>>>> (4) Destroy VM and abort setup > >>>>>> > >>>>>> (1, 2, 3, 4)[1]: 1 > >>>>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status! > >>>>>> Enter the name of the cluster to which you want to add the > >>>> host > >>>>>> (Default) [Default]: > >>>>>> [ ERROR ] Cannot automatically add the host to cluster Default: Cannot > >>>> add > >>>>>> Host. Connecting to host via SSH has failed, verify that the host is > >>>>>> reachable (IP address, routable address etc.) You may refer to the > >>>>>> engine.log file for further details. > >>>>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot add the host to > >>>>>> cluster Default > >>>>>> [ INFO ] Stage: Clean up > >>>>>> [ INFO ] Generating answer file > >>>>>> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20150306135624.conf' > >>>>>> [ INFO ] Stage: Pre-termination > >>>>>> [ INFO ] Stage: Termination > >>>>>> > >>>>>> I can ssh into the engine VM both locally and remotely. There is no > >>>>>> /root/.ssh directory, however. Did I need to set that up somehow? > >>>>> It's the engine that needs to open an SSH connection to the host > >>>>> calling > >>>> it by its hostname. > >>>>> So please be sure that you can SSH to the host from the engine using > >>>>> its > >>>> hostname and not its IP address. > >>>> > >>>> I'm assuming this should be a password-less login (key-based > >>>> authentication?). > >>> Yes, it is. > >>> > >>>> As what user? > >>> root > >> OK, I see a couple of problems. > >> First off, I didn't have my deploying-host hostname in the hosts map for > >> my > >> engine. > > This is enough by itself to make the deploy procedure failing. If possible > > we recommend to rely a DNS infrastructure especially if you are deploying > > more than one host. > > OK, I've started over. Simply removing the storage domain was insufficient, > the hosted-engine deploy failed when it found the HA and Broker services > already configured. I decided to just start over fresh starting with > re-installing the OS on my host. > > I can't deploy DNS at the moment, so I have to simply replicate /etc/hosts > files on my host/engine. I did that this time, but have run into a new > problem: > > [ INFO ] Engine replied: DB Up!Welcome to Health Status! > Enter the name of the cluster to which you want to add the host > (Default) [Default]: > [ INFO ] Waiting for the host to become operational in the engine. This may > take several minutes... > [ ERROR ] The VDSM host was found in a failed state. Please check engine and > bootstrap installation logs. > [ ERROR ] Unable to add ovirt-vm to the manager > Please shutdown the VM allowing the system to launch it as a > monitored service. > The system will wait until the VM is down. > [ ERROR ] Failed to execute stage 'Closing up': [Errno 111] Connection > refused > [ INFO ] Stage: Clean up > [ ERROR ] Failed to execute stage 'Clean up': [Errno 111] Connection refused > > > I've attached my engine log and the ovirt-hosted-engine-setup log. I think I > had an issue with resolving external hostnames, or else a connectivity issue > during the install.
For some reason your engine wasn't able to deploy your hosts but the SSH session this time was established. 2015-03-09 13:05:58,514 ERROR [org.ovirt.engine.core.bll.InstallVdsInternalCommand] (org.ovirt.thread.pool-8-thread-3) [3cf91626] Host installation failed for host 217016bb-fdcd-4344-a0ca-4548262d10a8, ovirt-vm.: java.io.IOException: Command returned failure code 1 during SSH session '[email protected]' Can you please attach host-deploy logs from the engine VM? thanks > So I have to start over again. Do you have any better tips on how can I clean > up in order to try this operation yet again? > > Thanks, > Bob > > > _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
