On Tue, Mar 17, 2015 at 12:18 PM, Renchu Mathew <ren...@cracknell.com> wrote: > Hi Piotr, > > I have re-installed the node with ovirt node 3.5 latest version and tried the > power management and it shows test succeeded, on but if I stop the network of > one of the node the running vm is not migrating to the other instead both > the nodes are getting down. Can anybody help me on this? >
Please provide engine and both nodes logs for analysis. > > Also is it possible to use the resources (CPU cores and memory) from other > node in the same cluster or combine 2 nodes in same clusters and create a vm > on that. > > Regards > > Renchu Mathew > > -----Original Message----- > From: Piotr Kliczewski [mailto:pklic...@redhat.com] > Sent: Tuesday, January 27, 2015 2:04 PM > To: Renchu Mathew > Cc: Piotr Kliczewski; Eli Mesika; users@ovirt.org > Subject: Re: [ovirt-users] Power Management config on Ovirt > > > > > > ----- Original Message ----- >> From: "Renchu Mathew" <ren...@cracknell.com> >> To: "Piotr Kliczewski" <pklic...@redhat.com> >> Cc: "Piotr Kliczewski" <piotr.kliczew...@gmail.com>, "Eli Mesika" >> <emes...@redhat.com>, users@ovirt.org >> Sent: Tuesday, January 27, 2015 10:48:12 AM >> Subject: RE: [ovirt-users] Power Management config on Ovirt >> >> Hi Piotr, >> >> Can you please provide me the link to download the new node iso? I can >> see only ovirt live iso. >> > > I saw that Douglas sent following links in other thread [1] on this list: > > centos7: > http://jenkins.ovirt.org/job/ovirt-node_master_create-iso-el7_merged/ > > Fedora20: > http://jenkins.ovirt.org/job/ovirt-node_master_create-iso-fc20_merged/ > > Please note that "We should share the official iso this week." > > [1] http://lists.ovirt.org/pipermail/users/2015-January/030846.html > >> >> Regards >> >> Renchu Mathew >> >> -----Original Message----- >> From: Piotr Kliczewski [mailto:pklic...@redhat.com] >> Sent: Tuesday, January 27, 2015 12:21 PM >> To: Renchu Mathew >> Cc: Piotr Kliczewski; Eli Mesika; users@ovirt.org >> Subject: Re: [ovirt-users] Power Management config on Ovirt >> >> Hi Mathew, >> >> It seems like this is quite old version (September 2014). There were >> good number of fixes in this area. >> >> Looking at provided logs I am not able to tell which call is exactly failing. >> Do you have any steps to reproduce? >> >> Thanks, >> Piotr >> >> ----- Original Message ----- >> From: "Renchu Mathew" <ren...@cracknell.com> >> To: "Piotr Kliczewski" <piotr.kliczew...@gmail.com> >> Cc: "Eli Mesika" <emes...@redhat.com>, "Piotr Kliczewski" >> <pklic...@redhat.com>, users@ovirt.org >> Sent: Monday, January 26, 2015 5:15:46 AM >> Subject: RE: [ovirt-users] Power Management config on Ovirt >> >> Hi Piotr, >> VDSM Version is vdsm-4.16.4-0.el6 >> >> Regards >> >> Renchu Mathew >> . >> >> From: Piotr Kliczewski [mailto:piotr.kliczew...@gmail.com] >> Sent: Sunday, January 25, 2015 6:08 PM >> To: Renchu Mathew >> Cc: Eli Mesika; Piotr Kliczewski; users@ovirt.org >> Subject: Re: [ovirt-users] Power Management config on Ovirt >> >> >> >> On Sun, Jan 25, 2015 at 2:07 PM, Renchu Mathew >> <ren...@cracknell.com<mailto:ren...@cracknell.com>> wrote: >> >> Hi Eli, >> >> >> >> I have 2 hypervisor host and both are installed with below iso file. >> Master data domain is glusterfs which is configured on another server. >> Is there any latest iso available? >> >> >> >> ovirt-node-iso-3.5.0.ovirt35.20140912.el6 (Edited). >> >> @Eli - Do we know which vdsm version is in this iso? >> >> >> >> >> Please find below details. >> >> >> >> [cid:image001.png@01D0393F.9A5CF2D0] >> >> >> >> Thanks & Regards >> >> >> >> Renchu Mathew >> >> >> >> -----Original Message----- >> From: Eli Mesika >> [mailto:emes...@redhat.com<mailto:emes...@redhat.com>] >> Sent: Sunday, January 25, 2015 4:46 PM >> To: Renchu Mathew >> Cc: Martin Perina; users@ovirt.org<mailto:users@ovirt.org>; Piotr >> Kliczewski >> Subject: Re: [ovirt-users] Power Management config on Ovirt >> >> >> >> >> >> >> >> ----- Original Message ----- >> >> > From: "Renchu Mathew" >> > <ren...@cracknell.com<mailto:ren...@cracknell.com>> >> >> > To: "Eli Mesika" <emes...@redhat.com<mailto:emes...@redhat.com>> >> >> > Cc: "Martin Perina" <mper...@redhat.com<mailto:mper...@redhat.com>>, >> > users@ovirt.org<mailto:users@ovirt.org> >> >> > Sent: Sunday, January 25, 2015 11:19:21 AM >> >> > Subject: RE: [ovirt-users] Power Management config on Ovirt >> >> > >> >> > Hi Eli, >> >> > >> >> > Please use any details. >> >> > >> >> > Thanks for your support. >> >> > >> >> > Regards >> >> > >> >> > Renchu Mathew >> >> >> >> Hi again >> >> >> >> Looking in the logs I see that this is a issue we handled when we >> switched from XML RPC to JSON RPC protocol. >> >> Which vdsm is installed in the proxy host ? >> >> I am adding Piotr who is on charge of the JSON RPC protocol and who >> helped me in the past when I got a similar error on PM operations >> >> It looks like marshaling issue but I am not sure whether it was >> already fixed or it is something new. I am not able to match a call >> when looking at engine.log. >> >> >> >> >> >> > >> >> > -----Original Message----- >> >> > From: Eli Mesika >> > [mailto:emes...@redhat.com<mailto:emes...@redhat.com>] >> >> > Sent: Sunday, January 25, 2015 12:58 PM >> >> > To: Renchu Mathew >> >> > Cc: Martin Perina; users@ovirt.org<mailto:users@ovirt.org> >> >> > Subject: Re: [ovirt-users] Power Management config on Ovirt >> >> > >> >> > Hi Renchu >> >> > >> >> > I am looking currently on he case and will respond later on today >> >> > after investigating the logs. >> >> > If I will not find anything, can I use the details for the host PM >> >> > only for status command to try to debug and find the source of the >> > problem ? >> >> > >> >> > Thanks >> >> > >> >> > Eli >> >> > >> >> > ----- Original Message ----- >> >> > > From: "Renchu Mathew" >> > > <ren...@cracknell.com<mailto:ren...@cracknell.com>> >> >> > > To: "Martin Perina" >> > > <mper...@redhat.com<mailto:mper...@redhat.com>> >> >> > > Cc: users@ovirt.org<mailto:users@ovirt.org>, "Eli Mesika" >> > > <emes...@redhat.com<mailto:emes...@redhat.com>> >> >> > > Sent: Sunday, January 25, 2015 6:50:00 AM >> >> > > Subject: RE: [ovirt-users] Power Management config on Ovirt >> >> > > >> >> > > Hi Martin, >> >> > > >> >> > > I got the below output when I run the command and it works from >> > > both >> >> > > the nodes. >> >> > > >> >> > > fence_ipmilan -a 192.168.1.114 -l admin -p admin -o status -v -P >> >> > > >> >> > > Getting status of IPMI:192.168.1.114...Spawning: >> > > '/usr/bin/ipmitool >> >> > > -I lanplus -H '192.168.1.114' -U 'admin' -P '[set]' -v chassis >> > > power >> >> > > status'... >> >> > > Chassis power = On >> >> > > Done >> >> > > >> >> > > Thanks >> >> > > >> >> > > Renchu Mathew | Sr. IT Administrator >> >> > > >> >> > > >> >> > > >> >> > > CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T >> >> > > +971 4 >> >> > > 3445417 | F +971 4 3493675<tel:%2B971%204%203493675> | M +971 >> > > 50 7386484<tel:%2B971%2050%207386484> ABU DHABI | DUBAI >> >> > > | LONDON | MUSCAT | DOHA | JEDDAH EMAIL >> > > | ren...@cracknell.com<mailto:ren...@cracknell.com> | WEB >> >> > > www.cracknell.com<http://www.cracknell.com> >> >> > > >> >> > > This email, its content and any files transmitted with it are >> >> > > intended solely for the addressee(s) and may be legally privileged >> >> > > and/or confidential. If you are not the intended recipient please >> >> > > let us know by email reply and delete it from the system. Please >> >> > > note that any views or opinions presented in this email do not >> >> > > necessarily represent those of the company. Email transmissions >> >> > > cannot be guaranteed to be secure or error-free as information >> > > could >> >> > > be intercepted, corrupted, lost, destroyed, arrive late or >> >> > > incomplete, or contain viruses. The company therefore does not >> >> > > accept liability for any errors or omissions in the contents of >> > > this >> >> > > message which arise as a result of email transmission. >> >> > > >> >> > > >> >> > > -----Original Message----- >> >> > > From: Martin Perina >> > > [mailto:mper...@redhat.com<mailto:mper...@redhat.com>] >> >> > > Sent: Thursday, January 22, 2015 6:12 PM >> >> > > To: Renchu Mathew >> >> > > Cc: users@ovirt.org<mailto:users@ovirt.org>; Eli Mesika >> >> > > Subject: Re: [ovirt-users] Power Management config on Ovirt >> >> > > >> >> > > >> >> > > >> >> > > ----- Original Message ----- >> >> > > > From: "Renchu Mathew" >> > > > <ren...@cracknell.com<mailto:ren...@cracknell.com>> >> >> > > > To: "Martin Perina" >> > > > <mper...@redhat.com<mailto:mper...@redhat.com>> >> >> > > > Cc: users@ovirt.org<mailto:users@ovirt.org> >> >> > > > Sent: Thursday, January 22, 2015 2:39:43 PM >> >> > > > Subject: RE: [ovirt-users] Power Management config on Ovirt >> >> > > > >> >> > > > Hi Martin, >> >> > > > >> >> > > > >> >> > > > >> >> > > > Yes. The vdsm host.log is from node-02. >> >> > > >> >> > > That's strange, I cannot find any call to fenceNode which should >> >> > > appear, if PM status is gathered. >> >> > > >> >> > > Eli, any idea? >> >> > > >> >> > > > I have checked the link and it says we need to install the sever >> >> > > > view management agent & net-snmp on the hosts. >> >> > > > Do we need to try this? How to install this on node? I used the >> >> > > > below irmc admin user. >> >> > > >> >> > > Not, AFAIK this is needed only from Clustersuite, but not for oVirt. >> >> > > >> >> > > But could you please execute this command on node-20 just to >> > > confirm >> >> > > that Fujitsu Primergy is communicating through IPMI: >> >> > > >> >> > > fence_ipmilan -a IP -l USER -p PASS -o status -v -P >> >> > > >> >> > > where IP is IPMI address (from the log it should be 192.168.1.114) >> >> > > USER and PASS please set according to you setup. >> >> > > >> >> > > Thanks >> >> > > >> >> > > Martin >> >> > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > [cid:image001.png@01D03669.DD48B4E0]<mailto:[cid:image001.png@01 >> > > > D03669.DD48B4E0]> >> >> > > > >> >> > > > >> >> > > > >> >> > > > Regards >> >> > > > >> >> > > > >> >> > > > >> >> > > > Renchu Mathew | Sr. IT Administrator >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T >> > > > +971 >> >> > > > 4 >> >> > > > 3445417 | F +971 4 3493675<tel:%2B971%204%203493675> | M +971 >> > > > 50 7386484<tel:%2B971%2050%207386484> >> >> > > > >> >> > > > ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH >> >> > > > >> >> > > > EMAIL ren...@cracknell.com<mailto:ren...@cracknell.com> | WEB >> > > > www.cracknell.com<http://www.cracknell.com> >> >> > > > >> >> > > > >> >> > > > >> >> > > > This email, its content and any files transmitted with it are >> >> > > > intended solely for the addressee(s) and may be legally >> > > > privileged >> >> > > > and/or confidential. If you are not the intended recipient >> > > > please >> >> > > > let us know by email reply and delete it from the system. Please >> >> > > > note that any views or opinions presented in this email do not >> >> > > > necessarily represent those of the company. Email transmissions >> >> > > > cannot be guaranteed to be secure or error-free as information >> >> > > > could be intercepted, corrupted, lost, destroyed, arrive late or >> >> > > > incomplete, or contain viruses. The company therefore does not >> >> > > > accept liability for any errors or omissions in the contents of >> >> > > > this message which arise as a result of email transmission. >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > -----Original Message----- >> >> > > > From: Martin Perina >> > > > [mailto:mper...@redhat.com<mailto:mper...@redhat.com>] >> >> > > > Sent: Thursday, January 22, 2015 4:49 PM >> >> > > > To: Renchu Mathew >> >> > > > Cc: users@ovirt.org<mailto:users@ovirt.org> >> >> > > > Subject: Re: [ovirt-users] Power Management config on Ovirt >> >> > > > >> >> > > > >> >> > > > >> >> > > > Hi, >> >> > > > >> >> > > > >> >> > > > >> >> > > > according to [1] Fujitsu iRMC should be accessible using IPMI. >> >> > > > >> >> > > > Now, I looked at logs, but I cannot see any fenceNode exection >> > > > in >> >> > > > vdsm.log. >> >> > > > According to engine.log, host >> > > > Node-02.cracknell.com<http://Node-02.cracknell.com> was used as >> >> > > > fence proxy. >> >> > > > Are you sure that vdsm.log is from this host? >> >> > > > >> >> > > > >> >> > > > >> >> > > > Thanks >> >> > > > >> >> > > > >> >> > > > >> >> > > > Martin >> >> > > > >> >> > > > >> >> > > > >> >> > > > [1] >> >> > > > https://www.redhat.com/archives/linux-cluster/2010-January/msg00056. >> >> > > > ht >> >> > > > ml >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > >> >> > > > ----- Original Message ----- >> >> > > > >> >> > > > > From: "Renchu Mathew" >> > > > > <ren...@cracknell.com<mailto:ren...@cracknell.com>> >> >> > > > >> >> > > > > To: "Martin Perina" >> > > > > <mper...@redhat.com<mailto:mper...@redhat.com>> >> >> > > > >> >> > > > > Cc: users@ovirt.org<mailto:users@ovirt.org> >> >> > > > >> >> > > > > Sent: Thursday, January 22, 2015 12:37:51 PM >> >> > > > >> >> > > > > Subject: RE: [ovirt-users] Power Management config on Ovirt >> >> > > > >> >> > > > > >> >> > > > >> >> > > > > Hi Martin, >> >> > > > >> >> > > > > >> >> > > > >> >> > > > > Please find attached log files from engine and proxy host. Not >> >> > > > > sure >> >> > > > >> >> > > > > whether IPMI or which one can be used. It is Fujitsu iRMC port. >> >> > > > > I also >> >> > > > >> >> > > > > tried the rsb but same error. >> >> > > > >> >> > > > > >> >> > > > >> >> > > > > Can we configure Power management using Fujitsu iRMC? >> >> > > > >> >> > > > > >> >> > > > >> >> > > > > Thanks & Regards >> >> > > > >> >> > > > > >> >> > > > >> >> > > > > Renchu Mathew >> >> > > > >> >> > > > > >> >> > > > >> >> > > > > -----Original Message----- >> >> > > > >> >> > > > > From: Martin Perina >> > > > > [mailto:mper...@redhat.com<mailto:mper...@redhat.com>] >> >> > > > >> >> > > > > Sent: Thursday, January 22, 2015 1:58 PM >> >> > > > >> >> > > > > To: Renchu Mathew >> >> > > > >> >> > > > > Cc: users@ovirt.org<mailto:users@ovirt.org> >> >> > > > >> >> > > > > Subject: Re: [ovirt-users] Power Management config on Ovirt >> >> > > > >> >> > > > > >> >> > > > >> >> > > > > Hi, >> >> > > > >> >> > > > > >> >> > > > >> >> > > > > first of all are you sure that Fujitsu PRIMERGY is accessible >> >> > > > > using >> >> > > > >> >> > > > > IPMI protocol? If so, could you provide engine.log and also >> >> > > > > vdsm.log >> >> > > > >> >> > > > > from host that was used as fencing proxy? You can find out >> > > > > which >> >> > > > > host >> >> > > > >> >> > > > > is used as a proxy either in Events tab after you execute the >> >> > > > > test or in engine.log. >> >> > > > >> >> > > > > >> >> > > > >> >> > > > > Thanks >> >> > > > >> >> > > > > >> >> > > > >> >> > > > > Martin Perina >> >> > > > >> >> > > > > >> >> > > > >> >> > > > > ----- Original Message ----- >> >> > > > >> >> > > > > > From: "Renchu Mathew" >> > > > > > <ren...@cracknell.com<mailto:ren...@cracknell.com>> >> >> > > > >> >> > > > > > To: users@ovirt.org<mailto:users@ovirt.org> >> >> > > > >> >> > > > > > Sent: Thursday, January 22, 2015 7:41:43 AM >> >> > > > >> >> > > > > > Subject: [ovirt-users] Power Management config on Ovirt >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > Dear all, >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > I am trying to configure power management on ovirt v3.5 >> >> > > > >> >> > > > > > (ovirt-node-iso-3.5.0.ovirt35.20140912.el6) and using two >> >> > > > > > Fujitsu >> >> > > > >> >> > > > > > PRIMERGY >> >> > > > >> >> > > > > > RX2540 M1 as node hypervisor. I used Fujitsu iRMC port on >> >> > > > > > power >> >> > > > >> >> > > > > > management configuration. The test gives a message “Test >> >> > > > > > failed, >> >> > > > >> >> > > > > > argument of type ‘NoneType’ is not iterable” as below . Also >> >> > > > > > tried >> >> > > > >> >> > > > > > rsb type as per redhat document. >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > Fence-agents-3.1.5-35.el6_5.4.x86_64 is there on both nodes. >> >> > > > > > Do we >> >> > > > >> >> > > > > > need to specify anything in Options? >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > Please help me. >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > Best Regards >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > Renchu Mathew >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > > _______________________________________________ >> >> > > > >> >> > > > > > Users mailing list >> >> > > > >> >> > > > > > Users@ovirt.org<mailto:Users@ovirt.org<mailto:us...@ovirt.or >> > > > > > g%3cmailto:Users@ovirt.org>> >> >> > > > >> >> > > > > > http://lists.ovirt.org/mailman/listinfo/users >> >> > > > >> >> > > > > > >> >> > > > >> >> > > > > >> >> > > > >> >> > > >> >> > >> >> _______________________________________________ >> Users mailing list >> Users@ovirt.org<mailto:Users@ovirt.org> >> http://lists.ovirt.org/mailman/listinfo/users >> >> _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users