Thoughts about Adding Storage Luns As I am new here, I would appreciate some advice about some actions that I intend to perform, please read.
I have added a LUN to my cluster and, for that task, I had to restart every node of it. There was no LUNs before, multipathd was stopped and multipath.conf inexisted. I was able to log in and manually configure multipath.conf, a simple multipathd start was not enough. If this wasn't enough, my double NetAPP ( through an Hitachi ) provided me with a not so empty brand new LUN, and the task to add the FCP failed to point this. Trusting my double, I spent some precious time searching for different problems, until receiving some guidance and do a simple dd if=/dev/zero to the initial blocks of the LUN. Consulting the documentation ( http://www.ovirt.org/OVirt_Administration_Guide#Adding_FCP_Storage ) for this matters, was not of any help. So, my questions: This is the intended behavior? Should I open a ticket? Should I add a note to documentation to point such behavior? ( i'm about to ) Cheers, by qoelheX Aviso Legal A informação contida neste e-mail e em seus anexos pode ser restrita, sendo o emitente deste responsável por seu conteúdo e endereçamento. Se você não for a pessoa autorizada a receber esta mensagem e tendo recebido a mesma por engano, favor apagá-la imediatamente. A JFSC considera opiniões, conclusões e outras informações não oficiais de responsabilidade do usuário deste serviço.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users