On 07/06/15 22:13, wodel youchi wrote: > Hi, > > We are installing a new ovirt platform for a client. this is our first > deployment. > > we chose Hosted Engine install. > > here is the hardware used and the network configuration used be patient :) > > We have 02 hypervisors for now. > > each sever has 8 nic ports, we will use bonding. > > A NAS with nfs4 for the Engine_VM the ISO and Export domains. > > And iSCSI SAN for the rest of the VMs (Data domain) > > At first we chose as a network configuration: > > 10.0.0.X/16 as DMZ (ovirtmgmt will use this network) > > 172.16.1/24 as Storage network. we've configured our nfs to export only > on this network. > > ----------------- > We didn't configure the bonding manually at first, we thought that we > could do it once the engine is up.... we couldn't :-( > > for ovirtmgmt, if we create the bond after the engine's installation, we > could not modify the configuration, error message "network in use" > > for the storage network, we could't attach this logical network to the > nic used for the storage, because when we do that we loose the connexion > to nfs for the VM engine... > > so we had to export the VM engine nfs's share on DMZ and we had to > configure bonding before starting the hosted engine installation. > > We also configured bonding on storage network, but after the engine > installation, we couldn't attach this bonding to the logical network > Storage, error message "you have to specify network address if static > protocol is used", the IP address is specified, it's the IP address of > the bonding... :-( > > --------------- > Questions: > > - Do we missed anything on network configuration capabilities of ovirt? > or the hosted engine is really a special case? Hosted engine is indeed a special case. We're working on some improvements for 3.6.
> - What is the best way to configure ovirt's Hosted Engine storage? In what way? ie- it should be as reliable as you can make it. > - For the rest of the network, do we have to configure bonding and > bridging from the GUI only? (not manually) If the networks should be recognized by ovirt, then it's wither the UI or the REST API. > > thanks in advance. > > > > > > > > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
