Thanks for this, looks like I missed the other reply (didn't seem to get your email either Robert).
I have made these changes, and looking at the VM itself it is reporting the correct memory[1]. However, in the browser it is still reporting as the old memory with the old name (the VM Id matches up with the new VM id that started)[2][3]. Not sure if it will eventually sync or not? Cheers, Simon [1] free -m total used free shared buffers cached Mem: 3832 1570 2262 14 22 261 -/+ buffers/cache: 1286 2546 Swap: 2559 0 2559 [2] hosted-engine --vm-start VM exists and is down, destroying it Machine destroyed a9f585f2-f5d3-4419-ab92-90f9e3e76ca4 Status = WaitForLaunch nicModel = rtl8139,pv emulatedMachine = pc pid = 0 vmName = ovirt-hosted-00 devices = [{'index': '2', 'iface': 'ide', 'specParams': {}, 'readonly': 'true', 'deviceId': 'a1d1f7ab-c1f7-46dd-b136-87d5eb4a24f1', 'address': {'bus': '1', 'controller': '0', 'type': 'drive', 'target': '0', 'unit': '0'}, 'device': 'cdrom', 'shared': 'false', 'path': '/home/tmp/CentOS-6.6-x86_64-minimal.iso', 'type': 'disk'}, {'index': '0', 'iface': 'virtio', 'format': 'raw', 'bootOrder': '1', 'poolID': '00000000-0000-0000-0000-000000000000', 'volumeID': '56b50442-e0 c2-4091-92f0-9b57f15883e6', 'imageID': 'ed290165-a97e-4d34-ba2f-6c03bdd66c51', 'specParams': {}, 'readonly': 'false', 'domainID': '1f9fee2a-d4a7-428b-98e0-e31935e5d857', 'optional': 'false', 'deviceId': 'ed290165-a97e-4d34-ba2f-6c03bdd66c5 1', 'address': {'slot': '0x06', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'function': '0x0'}, 'device': 'disk', 'shared': 'exclusive', 'propagateErrors': 'off', 'type': 'disk'}, {'device': 'scsi', 'model': 'virtio-scsi', 'type': 'c ontroller'}, {'nicModel': 'pv', 'macAddr': '00:16:3e:51:a6:e0', 'linkActive': 'true', 'network': 'ovirtmgmt', 'filter': 'vdsm-no-mac-spoofing', 'specParams': {}, 'deviceId': '04f0d794-d81a-4e85-9fa2-a0d430d32282', 'address': {'slot': '0x03 ', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface'}, {'device': 'console', 'specParams': {}, 'type': 'console', 'deviceId': '5648ddf6-e6da-44f9-a77e-2d10da2c2572', 'alias': 'con sole0'}] smp = 2 vmType = kvm display = qxl displaySecurePort = -1 memSize = 4096 displayPort = -1 cpuType = Nehalem clientIp = guestDiskMapping = {} displayIp = 0 spiceSecureChannels = smain,sdisplay,sinputs,scursor,splayback,srecord,ssmartcard,susbredir [3] ovirt-hosted-00.png > -----Original Message----- > From: Simone Tiraboschi [mailto:stira...@redhat.com] > Sent: 14 August 2015 09:43 > To: Robert Story > Cc: Simon Hallam; users@ovirt.org > Subject: Re: [ovirt-users] Add RAM to Hosted Engine > > On Thu, Aug 13, 2015 at 4:28 PM, Robert Story <rst...@tislabs.com> wrote: > > On Thu, 13 Aug 2015 09:06:16 +0000 Simon wrote: > > SH> [...] is it possible to retroactively add RAM to the virtual machine? > > > > See this thread: > > > > http://lists.ovirt.org/pipermail/users/2015-May/033021.html > > The good news is that on 3.6 you'll be able to edit EngineVM > configuration from the web admin interface. > > > -- > > Senior Software Engineer @ Parsons > > > > _______________________________________________ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > Please visit our new website at www.pml.ac.uk and follow us on Twitter @PlymouthMarine Winner of the Environment & Conservation category, the Charity Awards 2014. Plymouth Marine Laboratory (PML) is a company limited by guarantee registered in England & Wales, company number 4178503. Registered Charity No. 1091222. Registered Office: Prospect Place, The Hoe, Plymouth PL1 3DH, UK. This message is private and confidential. If you have received this message in error, please notify the sender and remove it from your system. You are reminded that e-mail communications are not secure and may contain viruses; PML accepts no liability for any loss or damage which may be caused by viruses.
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users