Hi Jakub, I think I had a similar problem. Vdsm would change the parameters of my network interface even when I used the ovirt management console to change it. There are files that vdsm use to configure the ifcfg-* files in /var/lib/vdsm/persistence/netconf/ovirtmgmt on the virtual server hosts. Maybe you can try fooling around with those.
Good luck, Tyler On Tue, Aug 11, 2015 at 9:08 AM, Jakub Niedermertl <[email protected]> wrote: > Ahoj, > > I've created a bug https://bugzilla.redhat.com/show_bug.cgi?id=1252534 > and assign it to you. > > Thanks for help > Jakub > > ----- Original Message ----- > > From: "Ondřej Svoboda" <[email protected]> > > To: [email protected] > > Sent: Tuesday, August 11, 2015 2:06:36 PM > > Subject: Re: [ovirt-users] vdsm keeps removing BOOTPROTO=dhcp from > ifcfg-ovirtmgmt > > > > Ahoj Kubo, > > > > would you try running 'sudo vdsClient -s 0 setSafeNetworkConfig' right > > after restarting the network service? I think your configuration needs > > be persisted in VDSM's network persistence so it is restored (with the > > same configuration) on startup. > > > > Anyway, VDSM should be used to configure networks (directly using > > vdsClient or indirectly through oVirt engine or via other means -- RPC). > > Your network may be configured by running (assuming your NIC is eth0): > > > > vdsClient -s 0 setupNetworks > > > 'networks={ovirtmgmt:{nic:eth0,bootproto:dhcp,blockingdhcp:true,bridged:true,stp:false,defaultRoute:false}}' > > > > If this doesn't help please attach /var/log/vdsm/supervdsm.log or file a > > bug with myself as the assignee :-) > > > > Thanks, > > Ondra > > > > On 11.8.2015 13:04, Jakub Niedermertl wrote: > > > Hi all, > > > > > > I'd like my ovirtmgmt bridge to fetch ip address from dhcp, but vdsm > keeps > > > removing 'BOOTPROTO=dhcp' from > > > /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt. > > > > > > I set the file as follows: > > > > > > DEVICE=ovirtmgmt > > > TYPE=Bridge > > > DELAY=0 > > > STP=off > > > ONBOOT=yes > > > BOOTPROTO=dhcp > > > MTU=1500 > > > DEFROUTE=no > > > NM_CONTROLLED=no > > > IPV6INIT=no > > > > > > call 'sudo systemctl restart network' and ip address is successfully > > > assigned. Then reboot the machine and ip address is not fetched and > > > ifcfg-ovirtmgmt looks like this > > > > > > # Generated by VDSM version 4.17.0-1240.git487a19e.fc22 > > > DEVICE=ovirtmgmt > > > TYPE=Bridge > > > DELAY=0 > > > STP=off > > > ONBOOT=yes > > > MTU=1500 > > > DEFROUTE=no > > > NM_CONTROLLED=no > > > IPV6INIT=no > > > HOTPLUG=no > > > > > > Is there any way how to prevent vdsm from removing BOOTPROTO statement > or > > > make ovirtmgmt to work with dhcp? > > > > > > Environment: > > > Host: runs in virt-manager vm, Fedora 22 > > > vdsm: 4.17.0-1240.git487a19e.fc22 from > > > http://resources.ovirt.org/pub/ovirt-3.6-pre/rpm/fc$releasever/ > > > > > > Thanks. > > > > > > Jakub > > > _______________________________________________ > > > Users mailing list > > > [email protected] > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > _______________________________________________ > > Users mailing list > > [email protected] > > http://lists.ovirt.org/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > [email protected] > http://lists.ovirt.org/mailman/listinfo/users >
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
