On Thu, Oct 22, 2015 at 5:08 PM, Simone Tiraboschi <stira...@redhat.com> wrote:
> >> engine is up and admin web portal accessible and host results up. >> >> I expected storage to be configured inside admin web portal but >> apparently I don't see anything already configured and also I don't see the >> sh engine VM listed... is it correct? >> > > No, we have an open bug on that: > https://bugzilla.redhat.com/show_bug.cgi?id=1269768 > > You can try to manually import it in the mean time. > Ok, I'll try. So when bug solved, if I have a problem with the engine and for example I'm not able to connect to it through ssh and/or web admin console, what other means would I have to connect to it console and check (eg if it is in kernel panic for any reason)? During setup I was proposed to connect via remote-viewer via a temporary password; I imagine this way is not usable after install, correct? > > But hosted-engine storage domain can just contain the engine VM so you > still need to add a regular storage domain for other VMs. > > >> Ah, ok. I thought that the initial storage domain would have become the first storage domain for general VMs purposes too... So actually if on dedicated filesystem/device, it could be small in size, say 5-10Gb if I use the appliance, correct? > BTW: what is the 2Gb file system on loop device? >> > > It was used by hosted-engine-setup as a fake storage pool to bootstrap the > hosted-engine storage domain. > It shouldn't be there at the end. > Could you please attach hosted-engine-setup logs to let me check why it's > still there? > here it is: https://drive.google.com/file/d/0BwoPbcrMv8mvRFFKSmR0REN3Qkk/view?usp=sharing > > >> >> I configured the storage domain part as NFS, pointing >> to ovc71.localdomain.local:/NFS_DOMAIN >> Reading page at >> http://www.ovirt.org/Features/Self_Hosted_Engine >> >> it is not clear to me what to do next if I want for example keep a single >> host with its sh engine as a replacement concept of what before was >> all-in-one... and start creating VMs.... >> > > You have to setup your first regular data domain for other VMs: you can > add another NFS one. > OK. In case I want to setup a single host with self hosted engine, could I configure on hypervisor a) one NFS share for sh engine b) one NFS share for ISO DOMAIN c) a local filesystem to be used to create then a local POSIX complant FS storage domain and work this way as a replacement of all-in-one? >> > Put the host in global maintenance (otherwise the engine VM will be > restarted) > Shutdown the engine VM > Shutdown the host > > >> >> Ok. And for starting all again, is this correct: a) power on hypevisor b) hosted-engine --set-maintenance --mode=none other steps required?
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users