On 11/14/2015 06:30 PM, Iosif Radu wrote:
The only thing that worked was filling the disk with zeros. I tried
delete all partitions and create a single one without format it or
mount it and it didn't work.
Thanks for your help knarra !
YW :-)
On Sat, Nov 14, 2015 at 1:15 PM, knarra <[email protected]
<mailto:[email protected]>> wrote:
On 11/14/2015 03:55 PM, Iosif Radu wrote:
Hi,
thank you for your answer. here <https://imgur.com/LPtgh8N> are
the disks of the test vm. The sdb1 device is the one I want to
use it for gluster setup.
As you can see is locked. What exactly can I do to unlock it? On
the VM side, the hard-disk is partitioned and mounted.
umount the disk and fill it with zeros using dd command if you do
not have any data in the disk and click on the sync button. you
should see the disk with out the lock symbol.
Add a new disk and click on the sync button so that you can see
the newly added disk with out lock symbol.
Otherwise, create another parition inside the existing disk and
click on sync button. you should be able to see the device with
out lock.
On Sat, Nov 14, 2015 at 9:42 AM, knarra <[email protected]
<mailto:[email protected]>> wrote:
On 11/12/2015 09:16 PM, Iosif Radu wrote:
Hi guys,
brand new with ovirt. I'm trying to use it to manage my
gluster set-up.
For testing purpose I've installed 3 Centos 7 machines, one
for the engine and the other two as glusterfs nodes.
All machines are using the 3.6 repo version. Both nodes have
an extra hard disk to be used by gluster.
Everything went smotth, I activated and installed the nodes
and I have no errors in engine.log or in deploy logs.
My understanding was that I can create bricks and use them
to create volumes in ovirt.
The extra hard disks I have for nodes are formated as xfs
and mounted. I can see them in the engine admin interface
but the "create brick" button is grayed out.
Thanks.
_______________________________________________
Users mailing list
[email protected] <mailto:[email protected]>
http://lists.ovirt.org/mailman/listinfo/users
Hi,
Once user selects a disk which is free then the create
brick button will get enabled.
If you have some disks listed under the storage devices sub
tab which does not have a lock symbol associated with it,
then select the disk and you can see that create brick button
will be enabled.
Hope this helps.
Thanks
kasturi.
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
