On Sat, Dec 26, 2015 at 6:27 PM, Will Dennis <wden...@nec-labs.com> wrote:
> Hi all, > > I have a hyperconverged setup where I have a hosted engine that runs on > one of three hosts, which are named “ovirt-node-[01,02,03]” — > > [root@ovirt-node-01 ~]# hosted-engine --vm-status | grep -e "Hostname" -e > "Engine" > Hostname : ovirt-node-01 > Engine status : {"health": "good", "vm": "up", > "detail": "up"} > Hostname : ovirt-node-02 > Engine status : {"reason": "vm not running on this > host", "health": "bad", "vm": "down", "detail": "unknown"} > Hostname : ovirt-node-03 > Engine status : {"reason": "vm not running on this > host", "health": "bad", "vm": "down", "detail": "unknown”} > > When I deployed the hosted engine, I gave it a separate hostname/IP, as I > expected it would need it (hostname = “ovirt-engine-01”) > > So when exactly did you changed the hostname? And what did you pass to the hosted engine install as answers? perhaps share the setup log under /var/log/ovirt-hosted-engine-ha However, when I look at the hosts in the oVirt web admin screen, I see that > the first host has the name “ovirt-engine-01” whereas it has the hostname > of “ovirt-node-01” > > I also notice that even though the 1st host is showing the number of VM’s > running as “1”, when I click on the “VMs” node, there are no VMs showing. > > You have to have a data center active, and only after that you would be able to see your engine VM. This is a must. First your hosted_storage will be imported into the setup automatically followed by the engine vm import. Not sure of what “should be”, but, would expect that the first host would > have a name equal to its DNS hostname (like the other two do), and that in > VMs I would see the engine VM. But is that not how a hosted engine setup > works? > > And if not, if the engine VM migrates over to another host, will that host > gain the name "“ovirt-engine-01”? > > no. We don't mess with that. The hostname is static in the engine. > I ask this now because I want to set up a storage domain on these hosts > using GlusterFS, and I have to select a host to base the connection on. In > the “Use Host” dropbox, I currently see the values: > > ovirt-node-03 > ovirt-node-02 > ovirt-engine-01 > > I would expect that the last entry would be for “ovirt-host-01”, not > “ovirt-engine-01”… > > I don’t want to set up the storage domain until I figure this out, so as > to prevent potential breakage... > > Thanks, > Will > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users