Hi Michael,
the fact that your CPU supports VT does not mean it's enabled in the BIOS.

Reboot the machine and into the security -> virtualization settings. Make
sure
it's enabled there.

One more thing you want to verify is that the kvm module is loaded into the
kernel-
lsmod | grep kvm

You can also run: dmesg | grep kvm
In most cases you'll find something like kvm: some  error if it's disable
by the bios.

Doron


On Wed, Dec 30, 2015 at 11:53 AM, Michael Cooper <mcoo...@coopfire.com>
wrote:

> Hey Guys,
>
>         First time pposter here, I am having an issue with installing
> oVirt on a Dell SC1435
> I ran lscpu to make sure I was Virtualized in the bios, The following was
> the result
>
> [root@council ~]# lscpu
> Architecture:          x86_64
> CPU op-mode(s):        32-bit, 64-bit
> Byte Order:            Little Endian
> CPU(s):                8
> On-line CPU(s) list:   0-7
> Thread(s) per core:    2
> Core(s) per socket:    4
> Socket(s):             1
> NUMA node(s):          1
> Vendor ID:             GenuineIntel
> CPU family:            6
> Model:                 30
> Model name:            Intel(R) Core(TM) i7 CPU       K 875  @ 2.93GHz
> Stepping:              5
> CPU MHz:               1197.000
> BogoMIPS:              5862.18
> Virtualization:        VT-x
> L1d cache:             32K
> L1i cache:             32K
> L2 cache:              256K
> L3 cache:              8192K
> NUMA node0 CPU(s):     0-7
>
> So I then tried to run the hosted-engine --deploy and this is what happens:
>
> [root@starfleet tmpengineiso]# screen
> [ INFO  ] Stage: Initializing
> [ INFO  ] Generating a temporary VNC password.
> [ INFO  ] Stage: Environment setup
>           Continuing will configure this host for serving as hypervisor
> and create a VM where you have to install oVirt Engine afterwards.
>           Are you sure you want to continue? (Yes, No)[Yes]: YEs
>           Configuration files: []
>           Log file:
> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20151230042443-p6o0qo.log
>           Version: otopi-1.4.0 (otopi-1.4.0-1.el7.centos)
> [ ERROR ] Failed to execute stage 'Environment setup': Hardware does not
> support virtualization
> [ INFO  ] Stage: Clean up
> [ INFO  ] Generating answer file
> '/var/lib/ovirt-hosted-engine-setup/answers/answers-20151230042447.conf'
> [ INFO  ] Stage: Pre-termination
> [ INFO  ] Stage: Termination
>
> I have attached my logfile, and a few screeshots .... Let me know please,
>
> Thanks,
>
> --
> Michael A Cooper
> Linux Certified
> Zerto Certified
> http://www.coopfire.com
>
> _______________________________________________
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Reply via email to