Hi,
do you want to import KVM disks into oVirt?
Then you should use this tool here:
https://rwmj.wordpress.com/2015/09/18/importing-kvm-guests-to-ovirt-or-rhev/
http://git.annexia.org/?p=import-to-ovirt.git
Example:
./import-to-ovirt.pl /home/import-disk-image.img <nfs-export-domain> --vmtype
Desktop --vcpus 1 --memory 2048
As you wrote you want to import Windows machine I would check first that
you are using already virtIO drivers in Windows (just check if you disk
is IDE or virtIO).
If this is not the case please perform the following:
1. Backup old IDE disk
2. Insert new virtIO disk (could be very small) into your VM
3. Install virtIO drivers from this iso file:
http://ftp.nluug.nl/os/Linux/virtual/ovirt/ovirt-3.6/rpm/el7/noarch/ovirt-guest-tools-iso-3.6.0-0.2_master.fc22.noarch.rpm
4. After that you can remove the new disk and change the old one from
IDE to virtIO.
5. Test boot
6. If everything is OK then power down the VM and import the disk with
the command above.
Hope that helps.
Best regards
Christoph
Am 09.01.2016 um 07:41 schrieb alireza sadeh seighalan:
hi everyone
how can i convert and impoart a qcow/raw/etc... image format to ovirt?
i installed virt-v2v and libguestfs-winsupport for convert and
import my windows image to ovirt . i created export domain too . but
i dont know how can i run it? i dont have any operational example.
thanks inadvance
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
