Hello,

I am running Ovirt 3.6.1 on CentOS 7.1 in a single server, hosted engine setup.

I have created 10 dummy dummy interfaces names 'dummy_[0-9]'. Ovirt sees them, and in "Networks" for my cluster, I created 10 10 "internal" networks called 'Internal_[0-9]'.

In the "Hosts" tab, in the "Network Interfaces" tab for my host, I assigned the 'dummy_*' interfaces tot he appropriate 'Internal_*' network (i.e., dummy_0 -> Internal_0, dummy_1 -> Internal_1, etc.)

I have create two VMs and assigned a NIC interface on each attached to the 'Internal_0' network. I gave the interfaces on the gusts an IP int he same subnet, but they cannot talk to each other.

When I try to ping one from the other, here is the response I get (public IPs redacted):

--- START ---
C:\Users\Administrator>ping 192.168.100.12

Pinging 192.168.100.12 with 32 bytes of data:
Reply from 192.168.100.20: Destination host unreachable.
Reply from XX.XXX.XX.XX: TTL expired in transit.
Request timed out.
Reply from XX.XXX.XX.XX: TTL expired in transit.

Ping statistics for 192.168.100.12:
    Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),
--- END ---

The IP of the PC I am pinging from is '192.168.100.20'

I have been able to setup internal networks like this before, but seem to be missing something and I am not sure what?

Here is what the dummy_0 interface shows when I run 'ip addr show':

--- START ---
7: dummy_0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master Internal_0 state UNKNOWN
    link/ether 0e:a2:6b:54:1a:91 brd ff:ff:ff:ff:ff:ff
--- END ---

and Internal_0 looks like this:

--- START ---
20: Internal_0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
    link/ether 0e:a2:6b:54:1a:91 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::dc07:84ff:fe1b:60cb/64 scope link
       valid_lft forever preferred_lft forever
--- END ---

I am not sure what other info you need, so please do let me know.

I did see this: <http://blog.duderamos.com/internal-isolated-networks-on-ovirt/> and except that I use 'dummy_*' instead of 'dummy*', my setup is the same.

Thanks, in advance, for your help on this.

Regards,

Alan
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Reply via email to