Nir,
See attached the repoplot output.

On Thu, Apr 14, 2016 at 12:18 PM, Nir Soffer <nsof...@redhat.com> wrote:

> On Thu, Apr 14, 2016 at 12:02 PM, Fred Rolland <froll...@redhat.com>
> wrote:
> > From the log, we can see that the lvextend command took 18 sec, which is
> > quite long.
>
> Fred, can you run repoplot on this log file? it will may explain why this
> lvm
> call took 18 seconds.
>
> Nir
>
> >
> > 60decf0c-6d9a-4c3b-bee6-de9d2ff05e85::DEBUG::2016-04-13
> > 10:52:06,759::lvm::290::Storage.Misc.excCmd::(cmd) /usr/bin/taskset
> > --cpu-list 0-23 /usr/bin/sudo -n /usr/sbin/lvm lvextend --config '
> devices {
> > preferred_names = ["^/dev/mapper/"] ignore_suspended_devices=1
> > write_cache_state=0 disable_after_error_count=3 filter = [
> > '\''a|/dev/mapper/36000eb3a4f1acbc20000000000000043|'\'', '\''r|.*|'\''
> ] }
> > global {  locking_type=1  prioritise_write_locks=1  wait_for_locks=1
> > use_lvmetad=0 }  backup {  retain_min = 50  retain_days = 0 } '
> --autobackup
> > n --size 6016m
> > 5de4a000-a9c4-489c-8eee-10368647c413/721d09bc-60e7-4310-9ba2-522d2a4b03d0
> > (cwd None)
> > ....
> > 60decf0c-6d9a-4c3b-bee6-de9d2ff05e85::DEBUG::2016-04-13
> > 10:52:22,217::lvm::290::Storage.Misc.excCmd::(cmd) SUCCESS: <err> = '
> > WARNING: lvmetad is running but disabled. Restart lvmetad before enabling
> > it!\n  WARNING: This metadata update is NOT backed up\n'; <rc> = 0
> >
> >
> > The watermark can be configured by the following value:
> >
> > 'volume_utilization_percent', '50',
> >     'Together with volume_utilization_chunk_mb, set the minimal free '
> >     'space before a thin provisioned block volume is extended. Use '
> >     'lower values to extend earlier.')
> >
> > On Thu, Apr 14, 2016 at 11:42 AM, Michal Skrivanek
> > <michal.skriva...@redhat.com> wrote:
> >>
> >>
> >> > On 14 Apr 2016, at 09:57, nico...@devels.es wrote:
> >> >
> >> > Ok, that makes sense, thanks for the insight both Alex and Fred. I'm
> >> > attaching the VDSM log of the SPM node at the time of the pause. I
> couldn't
> >> > find anything that would clearly identify the problem, but maybe
> you'll be
> >> > able to.
> >>
> >> In extreme conditions it will happen. When your storage is slow to
> respond
> >> to extension request, and when your write rate is very high then it may
> >> happen, as it is happening to you, that you run out space sooner than
> the
> >> extension finishes. You can change the watermark value I guess(right,
> >> Fred?), but better would be to plan a bit more ahead and either use
> >> preallocated or create thin and then allocate expected size in advance
> >> before the operation causing it (typically it only happens during
> untarring
> >> gigabytes of data, or huge database dump/restore)
> >> Even then, the VM should always be automatially resumed once the disk
> >> space is allocated
> >>
> >> Thanks,
> >> michal
> >>
> >> >
> >> > Thanks.
> >> >
> >> > Regards.
> >> >
> >> > El 2016-04-13 13:09, Fred Rolland escribió:
> >> >> Hi,
> >> >> Yes, just as Alex explained, if the disk has been created as thin
> >> >> provisioning, the vdsm will extends once a watermark is reached.
> >> >> Usually it should not get to the state the Vm is paused.
> >> >> From the log, you can see that the request for extension has been
> sent
> >> >> before the VM got to the No Space Error.
> >> >> Later, we can see the VM resuming.
> >> >> INFO::2016-04-13
> >> >> 10:52:04,182::vm::1026::virt.vm::(extendDrivesIfNeeded)
> >> >> vmId=`f9cd282e-110a-4896-98d3-6d320662744d`::Requesting extension for
> >> >> volume
> >> >> ....
> >> >> INFO::2016-04-13 10:52:29,360::vm::3728::virt.vm::(onIOError)
> >> >> vmId=`f9cd282e-110a-4896-98d3-6d320662744d`::abnormal vm stop device
> >> >> virtio-disk0 error enospc
> >> >> ....
> >> >> INFO::2016-04-13
> 10:52:54,317::vm::5084::virt.vm::(_logGuestCpuStatus)
> >> >> vmId=`f9cd282e-110a-4896-98d3-6d320662744d`::CPU running: onResume
> >> >> Note that the extension is done on the SPM host, so it would be
> >> >> interesting to see the vdsm log from the host that was in SPM role at
> >> >> this timeframe.
> >> >> Regards,
> >> >> Fred
> >> >> On Wed, Apr 13, 2016 at 2:43 PM, Alex Crow <ac...@integrafin.co.uk>
> >> >> wrote:
> >> >>> Hi,
> >> >>> If you have set up VM disks as Thin Provisioned, the VM has to
> >> >>> pause when the disk image needs to expand. You won't see this on VMs
> >> >>> with preallocated storage.
> >> >>> It's not the SAN that's running out of space, it's the VM image
> >> >>> needing to be expanded incrementally each time.
> >> >>> Cheers
> >> >>> Alex
> >> >>> On 13/04/16 12:04, nico...@devels.es wrote:
> >> >>> Hi Fred,
> >> >>> This is an iSCSI storage. I'm attaching the VDSM logs from the host
> >> >>> where this machine has been running. Should you need any further
> >> >>> info, don't hesitate to ask.
> >> >>> Thanks.
> >> >>> Regards.
> >> >>> El 2016-04-13 11:54, Fred Rolland escribió:
> >> >>> Hi,
> >> >>> What kind of storage do you have ? (ISCSI,FC,NFS...)
> >> >>> Can you provide the vdsm logs from the host where this VM runs ?
> >> >>> Thanks,
> >> >>> Freddy
> >> >>> On Wed, Apr 13, 2016 at 1:02 PM, <nico...@devels.es> wrote:
> >> >>> Hi,
> >> >>> We're running oVirt 3.6.4.1-1. Lately we're seeing a bunch of
> >> >>> events like these:
> >> >>> 2016-04-13 10:52:30,735 INFO
> >> >>> [org.ovirt.engine.core.vdsbroker.VmAnalyzer]
> >> >>> (DefaultQuartzScheduler_Worker-86) [60dea18f] VM
> >> >>> 'f9cd282e-110a-4896-98d3-6d320662744d'(vm.domain.com [1] [1]) moved
> >> >>> from
> >> >>> 'Up' --> 'Paused'
> >> >>> 2016-04-13 10:52:30,815 INFO
> >> >>
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> >> >>> (DefaultQuartzScheduler_Worker-86) [60dea18f] Correlation ID: null,
> >> >>> Call Stack: null, Custom Event ID: -1, Message: VM vm.domain.com
> >> >>> [1] [1]
> >> >>> has been paused.
> >> >>> 2016-04-13 10:52:30,898 ERROR
> >> >>
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> >> >>> (DefaultQuartzScheduler_Worker-86) [60dea18f] Correlation ID: null,
> >> >>> Call Stack: null, Custom Event ID: -1, Message: VM vm.domain.com
> >> >>> [1] [1]
> >> >>> has been paused due to no Storage space error.
> >> >>> 2016-04-13 10:52:52,320 WARN
> >> >>> [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData]
> >> >>> (org.ovirt.thread.pool-8-thread-38) [] domain
> >> >>> '5de4a000-a9c4-489c-8eee-10368647c413:iscsi01' in problem. vds:
> >> >>> 'host6.domain.com [2] [2]'
> >> >>> 2016-04-13 10:52:55,183 INFO
> >> >>> [org.ovirt.engine.core.vdsbroker.VmAnalyzer]
> >> >>> (DefaultQuartzScheduler_Worker-70) [3da0f3d4] VM
> >> >>> 'f9cd282e-110a-4896-98d3-6d320662744d'(vm.domain.com [1] [1]) moved
> >> >>> from
> >> >>> 'Paused' --> 'Up'
> >> >>> 2016-04-13 10:52:55,318 INFO
> >> >>
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> >> >>> (DefaultQuartzScheduler_Worker-70) [3da0f3d4] Correlation ID: null,
> >> >>> Call Stack: null, Custom Event ID: -1, Message: VM vm.domain.com
> >> >>> [1] [1]
> >> >>> has recovered from paused back to up.
> >> >>> The storage domain is far from being full, though (400+ G available
> >> >>> right now). Could this be related to this other issue [1]? If not,
> >> >>> how could I debug what's going on?
> >> >>> Thanks.
> >> >>>  [1]: https://www.mail-archive.com/users@ovirt.org/msg32079.html
> >> >>> [3]
> >> >>> [3]
> >> >>> _______________________________________________
> >> >>> Users mailing list
> >> >>> Users@ovirt.org
> >> >>> http://lists.ovirt.org/mailman/listinfo/users [4] [4]
> >> >>> Links:
> >> >>> ------
> >> >>> [1] http://vm.domain.com [1]
> >> >>> [2] http://host6.domain.com [2]
> >> >>> [3] https://www.mail-archive.com/users@ovirt.org/msg32079.html [3]
> >> >>> [4] http://lists.ovirt.org/mailman/listinfo/users [4]
> >> >> _______________________________________________
> >> >> Users mailing list
> >> >> Users@ovirt.org
> >> >> http://lists.ovirt.org/mailman/listinfo/users [4]
> >> >> --
> >> >> This message is intended only for the addressee and may contain
> >> >> confidential information. Unless you are that person, you may not
> >> >> disclose its contents or use it in any way and are requested to
> delete
> >> >> the message along with any attachments and notify us immediately.
> >> >> This email is not intended to, nor should it be taken to, constitute
> >> >> advice.
> >> >> The information provided is correct to our knowledge & belief and
> must
> >> >> not
> >> >> be used as a substitute for obtaining tax, regulatory, investment,
> >> >> legal or
> >> >> any other appropriate advice.
> >> >> "Transact" is operated by Integrated Financial Arrangements Ltd.
> >> >> 29 Clement's Lane, London EC4N 7AE. Tel: (020) 7608 4900 Fax: (020)
> >> >> 7608 5300.
> >> >> (Registered office: as above; Registered in England and Wales under
> >> >> number: 3727592). Authorised and regulated by the Financial Conduct
> >> >> Authority (entered on the Financial Services Register; no. 190856).
> >> >> _______________________________________________
> >> >> Users mailing list
> >> >> Users@ovirt.org
> >> >> http://lists.ovirt.org/mailman/listinfo/users [4]
> >> >> Links:
> >> >> ------
> >> >> [1] http://vm.domain.com
> >> >> [2] http://host6.domain.com
> >> >> [3] https://www.mail-archive.com/users@ovirt.org/msg32079.html
> >> >> [4] http://lists.ovirt.org/mailman/listinfo/users
> >> >> _______________________________________________
> >> >> Users mailing list
> >> >> Users@ovirt.org
> >> >> http://lists.ovirt.org/mailman/listinfo/users
> >> > <vdsm.log.gz>_______________________________________________
> >> > Users mailing list
> >> > Users@ovirt.org
> >> > http://lists.ovirt.org/mailman/listinfo/users
> >>
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>

Attachment: vdsm.log.pdf
Description: Adobe PDF document

_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Reply via email to