Hi Gervais,

Hmm, can you tar up the logfiles (/var/log/vdsm/* on the host you are installing on) and put them somewhere to look at? Also, I found that starting VDSM from the command line is useful as it sometimes spits out error messages that don't show up in the logs. I think the command I used was:
su -s /bin/bash vdsm
python /usr/share/vdsm/vdsm

My problem was that I customized the logging settings in /etc/vdsm/*conf to try and tone down the debugging stuff and had a syntax error.

On 16-05-12 10:24 PM, Gervais de Montbrun wrote:
Hi Charles,

Thanks for the suggestion.

I cleaned up again using the bash script from the recoving-from-failed-install link below, then reinstalled (yum install ovirt-hosted-engine-setup).

I enabled NetworkManager and firewalld as you suggested. The install stops very early on with an error: [ ERROR ] Failed to execute stage 'Programs detection': hosted-engine cannot be deployed while NetworkManager is running, please stop and disable it before proceeding

I disabled and stopped NetworkManager and tried again. Same result. :(

Any more guesses?

Cheers,
Gervais



On May 12, 2016, at 9:08 PM, Charles Tassell <ctass...@gmail.com <mailto:ctass...@gmail.com>> wrote:

Hey Gervais,

Try enabling NetworkManager and firewalld before doing the hosted-engine --deploy. I have run into problems with oVirt trying to perform tasks on hosts where firewalld is disabled, so maybe you are running into a similar problem. Also, I think the setup script will disable NetworkManager if it needs to. I know I didn't manually disable it on any of the boxes I installed on.

On 16-05-12 04:49 PM, users-requ...@ovirt.org <mailto:users-requ...@ovirt.org> wrote:
Message: 1
Date: Thu, 12 May 2016 14:22:12 -0300
From: Gervais de Montbrun <gerv...@demontbrun.com <mailto:gerv...@demontbrun.com>>
To: Wee Sritippho <we...@forest.go.th <mailto:we...@forest.go.th>>
Cc: users <users@ovirt.org <mailto:users@ovirt.org>>
Subject: Re: [ovirt-users] Adding another host to my cluster
Message-ID: <28b7fc74-5c52-4f60-b9f3-39a36621a...@demontbrun.com <mailto:28b7fc74-5c52-4f60-b9f3-39a36621a...@demontbrun.com>>
Content-Type: text/plain; charset="utf-8"

Hi Wee
(and others)

Thanks for the reply. I tried what you suggested, but I am in the exact same state. :-(

I don't want to completely remove my hosted engine setup as it is working on the two other hosts in my cluster. I did not run the rm -rf stes listed here (https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-failed-install <https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-failed-install>) that would wipe my hosted_engine nfs mount. If you know that this is 100% necessary, please let me know.

I did:
hosted-engine --clean-metadata --force-cleanup --host-id=3
run the bash script to remove all of the ovirt packages and config files
reinstalled ovirt-hosted-engine-setup
ran "hosted-engine --deploy"

I'm back exactly where I started. Is there a way to run just the network configuration part of the deploy?

Since the last attempt, I did upgrade my hosted engine and my cluster is now running oVirt 3.6.5.

Cheers,
Gervais



On May 12, 2016, at 11:50 AM, Wee Sritippho <we...@forest.go.th <mailto:we...@forest.go.th>> wrote:

Hi,

I used to have a similar problem where one of my host can't be deployed due to the absence of ovirtmgmt bridge. Simone said it's a bug ( https://bugzilla.redhat.com/1323465 <https://bugzilla.redhat.com/1323465> ) which would be fixed in 3.6.6.

This is what I've done to solve it:

1. In the web UI, set the failed host to maintenance.
2. Remove it.
3. In that host, run a script from https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-failed-install <https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-failed-install>
4. Install ovirt-hosted-engine-setup again.
5. Redeploy again.

Hope that helps

On 11 ??????? 2016 22 ?????? 48 ???? 58 ?????? GMT+07:00, Gervais de Montbrun <gerv...@demontbrun.com <mailto:gerv...@demontbrun.com>> wrote:
Hi Folks,

I hate to reply to my own message, but I'm really hoping someone can help me with my issue http://lists.ovirt.org/pipermail/users/2016-May/039690.html <http://lists.ovirt.org/pipermail/users/2016-May/039690.html>

Does anyone have a suggestion for me? If there is any more information that I can provide that would help you to help me, please advise.

Cheers,
Gervais



On May 9, 2016, at 1:42 PM, Gervais de Montbrun <gerv...@demontbrun.com <mailto:gerv...@demontbrun.com> <mailto:gerv...@demontbrun.com <mailto:gerv...@demontbrun.com>>> wrote:

Hi All,

I'm trying to add a third host into my oVirt cluster. I have hosted engine setup on the first two. It's failing to finish the hosted-engine --deploy on this third host. I wiped the server and did a CentOS 7 minimum install and ran it again to have a clean machine.

My setup:
CentOS 7 clean install
yum install -y http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm <http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm>
yum install -y ovirt-hosted-engine-setup
yum upgrade -y && reboot
systemctl disable NetworkManager ; systemctl stop NetworkManager ; systemctl disable firewalld ; systemctl stop firewalld
hosted-engine --deploy

hosted-engine --deploy always throws an error:
[ ERROR ] The VDSM host was found in a failed state. Please check engine and bootstrap installation logs.
[ ERROR ] Unable to add Cultivar2 to the manager
and then echo's
[ INFO  ] Waiting for VDSM hardware info
...
[ ERROR ] Failed to execute stage 'Closing up': VDSM did not start within 120 seconds
[ INFO  ] Stage: Clean up
[ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine-setup/answers/answers-20160509131103.conf'
[ INFO  ] Stage: Pre-termination
[ INFO  ] Stage: Termination
[ ERROR ] Hosted Engine deployment failed: this system is not reliable, please check the issue, fix and redeploy Log file is located at /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160509130658-qb8ev0.log

Full output of hosted-engine --deploy included in the attached zip file. I've also included vdsm.log (There is more than one tries worth of tries in there). You'll also find the ovirt-hosted-engine-setup-20160509130658-qb8ev0.log listed above.

This is my "test" setup. Cultivar0 is my first host and my nfs server for storage. I have two hosts in the setup already and everything is working fine. The host does show up in the oVirt admin, but shows "Installed Failed"
<PastedGraphic-1.png>

Trying to reinstall from within the interface just fails again.

The ovirt bridge interface is not configured and there are no config files in /etc/sysconfi/network-scripts related to ovirt.

OS:
[root@cultivar2 ovirt-hosted-engine-setup]# cat /etc/redhat-release
CentOS Linux release 7.2.1511 (Core)

[root@cultivar2 ovirt-hosted-engine-setup]# uname -a
Linux cultivar2.grove.silverorange.com <http://cultivar2.grove.silverorange.com> <http://cultivar2.grove.silverorange.com/> 3.10.0-327.13.1.el7.x86_64 #1 SMP Thu Mar 31 16:04:38 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

Versions:
[root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i ovirt
libgovirt-0.3.3-1.el7_2.1.x86_64
ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
ovirt-host-deploy-1.4.1-1.el7.centos.noarch
ovirt-vmconsole-1.0.0-1.el7.centos.noarch
ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
ovirt-release36-007-1.noarch
ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
ovirt-setup-lib-1.0.1-1.el7.centos.noarch
ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
[root@cultivar2 ovirt-hosted-engine-setup]#
[root@cultivar2 ovirt-hosted-engine-setup]#
[root@cultivar2 ovirt-hosted-engine-setup]#
[root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i virt
libvirt-daemon-driver-secret-1.2.17-13.el7_2.4.x86_64
virt-viewer-2.0-6.el7.x86_64
libgovirt-0.3.3-1.el7_2.1.x86_64
libvirt-daemon-kvm-1.2.17-13.el7_2.4.x86_64
ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
fence-virt-0.3.2-2.el7.x86_64
virt-what-1.13-6.el7.x86_64
libvirt-python-1.2.17-2.el7.x86_64
libvirt-daemon-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-config-nwfilter-1.2.17-13.el7_2.4.x86_64
libvirt-lock-sanlock-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-nodedev-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-network-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-storage-1.2.17-13.el7_2.4.x86_64
ovirt-host-deploy-1.4.1-1.el7.centos.noarch
virt-v2v-1.28.1-1.55.el7.centos.2.x86_64
ovirt-vmconsole-1.0.0-1.el7.centos.noarch
ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
libvirt-client-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-nwfilter-1.2.17-13.el7_2.4.x86_64
ovirt-release36-007-1.noarch
libvirt-daemon-driver-interface-1.2.17-13.el7_2.4.x86_64
libvirt-daemon-driver-qemu-1.2.17-13.el7_2.4.x86_64
ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
ovirt-setup-lib-1.0.1-1.el7.centos.noarch
ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch

I also have a series of stuck tasks that I can't clear related to the host that can't be added... This is a secondary issue and I don't want to get off track, but they look like this:
<PastedGraphic-2.png>

I'd appreciate any help that can be offered.

Cheers,
Gervais


Gervais de Montbrun
Systems Administrator  / silverorange Inc.

Phone +1 902 367 4532 ext. 104 <tel:%2B1%20902%20367%204532%20ext.%20104> <tel:+1 902 367 4532 ext. 104 <tel:%2B1%20902%20367%204532%20ext.%20104>> Mobile +1 902 978 0009 <tel:%2B1%20902%20978%200009> <tel:+1 902 978 0009 <tel:%2B1%20902%20978%200009>>

<hosted-engine--deploy-logs.zip>


Users mailing list
Users@ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>

--
Wee


_______________________________________________
Users mailing list
Users@ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users


_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Reply via email to