Hi,
are using the Open vSwitch hook intentionally? If not, you |yum remove
vdsm-hook-ovs for a while. What is your exact VDSM version?
|
Thanks, Ondra
On 24.5.2016 11:47, Kai Kang wrote:
Hi,
I checked vdsm.log, it show error:
jsonrpc.Executor/0::DEBUG::2016-05-24
09:46:04,056::utils::671::root::(execCmd) /usr/bin/taskset --cpu-list
0-7 /usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs (cwd None)
jsonrpc.Executor/0::DEBUG::2016-05-24
09:46:04,136::utils::689::root::(execCmd) FAILED: <err> = 'Traceback
(most recent call last):\n File
"/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72, in
<module>\n main()\n File
"/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66, in
main\n
stats[\'network\'].update(ovs_networks_stats(stats[\'network\']))\nKeyError:
\'network\'\n\n'; <rc> = 2
jsonrpc.Executor/0::INFO::2016-05-24
09:46:04,136::hooks::98::root::(_runHooksDir) Traceback (most recent
call last):
File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 72,
in <module>
main()
File "/usr/lib64/vdsm/vdsm/hooks/after_get_stats/50_ovs", line 66,
in main
stats['network'].update(ovs_networks_stats(stats['network']))
KeyError: 'network'
I'm checking what wrong with it.
Thanks,
Kai
On Tue, May 24, 2016 at 3:57 PM, Kai Kang <[email protected]
<mailto:[email protected]>> wrote:
And network configurations on node:
[root at ovirt-node] # brctl show
bridge name bridge id STP enabled interfaces
docker0 8000.0242ae1de711 no
ovirtmgmt 8000.001320ff73aa no eth0
[root at ovirt-node] # ifconfig -a
docker0 Link encap:Ethernet HWaddr 02:42:ae:1d:e7:11
inet addr:172.17.0.1 Bcast:0.0.0.0 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth0 Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6331 errors:0 dropped:0 overruns:0 frame:0
TX packets:2866 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:762182 (744.3 KiB) TX bytes:210611 (205.6 KiB)
Interrupt:20 Memory:d1100000-d1120000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:36 errors:0 dropped:0 overruns:0 frame:0
TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2478 (2.4 KiB) TX bytes:2478 (2.4 KiB)
ovirtmgmt Link encap:Ethernet HWaddr 00:13:20:ff:73:aa
inet addr:128.224.165.170 Bcast:128.224.165.255
Mask:255.255.255.0
inet6 addr: fe80::213:20ff:feff:73aa/64 Scope:Link
inet6 addr: 11:2233:4455:6677:213:20ff:feff:73aa/64
Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6295 errors:0 dropped:6 overruns:0 frame:0
TX packets:2831 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:644421 (629.3 KiB) TX bytes:177616 (173.4 KiB)
sit0 Link encap:UNSPEC HWaddr
00-00-00-00-32-33-33-00-00-00-00-00-00-00-00-00
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 80:86:f2:8b:1d:cf
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Thanks,
Kai
On Tue, May 24, 2016 at 3:36 PM, Kai Kang <[email protected]
<mailto:[email protected]>> wrote:
Hi,
When I install a host, it fails with:
2016-05-24 07:00:01,749 ERROR
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
(DefaultQuartzScheduler_Worker-4) [1bf36cd4] Host 'node3' is
set to Non-Operational, it is missing the following networks:
'ovirtmgmt'
2016-05-24 07:00:01,781 WARN
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
(DefaultQuartzScheduler_Worker-4) [1bf36cd4] Correlation ID:
1bf36cd4, Job ID: db281e8f-67cc-441a-b44c-90b135e509bd, Call
Stack: null, Custom Event ID: -1, Message: Host node3 does not
comply with the cluster Default networks, the following
networks are missing on host: 'ovirtmgmt'
After I click the "Hosts" -> subtab "Network Interfaces" ->
"Setup Host Networks" on the web ui and drag ovirtmgmt to
"Assigned Logical" to link with eth0, then activate host
"node3" successfully.
My question is how to make such manual operation
automatically? Then I can run some automatic tests.
Thanks a lot.
--Kai
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
