On Thursday, June 09, 2016 03:47:17 PM Nicolas Ecarnot wrote: > Le 09/06/2016 15:31, Alexander Wels a écrit : > > On Thursday, June 09, 2016 03:11:07 PM Nicolas Ecarnot wrote: > >> Le 09/06/2016 08:58, Anantha Raghava a écrit : > >>> Hello Alexander, > >>> > >>> You are right. The FQDN was the culprit. Once I entered the FQDN in > >>> /etc/hosts file, the problem got resolved. > >> > >> Hello, > >> > >> I have not understood clearly whether your were using hosted engine or > >> bare-metal? > >> > >> I'm asking that because - as Alex knows it - I'm facing this terribly > >> slowness since months, and we took a lot a time trying to figure it out, > >> to no avail. > >> We're using 3.6.5 and bare-metal engine. > >> I triple checked DNS resolution, added (anyway) relevant fqdn in > >> /etc/hosts, install (anyway) haveged and rebooted. > >> We checked all that with Alex, but seeing nothing obvious. > >> > >> So far, the web gui usage is still a real daily pain. > > > > And we verified the ping between your browser machine and the engine was > > low. The load on the engine was near 0. That your browser was either > > Chrome/FF and that the machine running the browser is plenty powerful. > > > > Did you ever disable the repos besides the 3.6 one and run a yum update > > (on > > the engine)? > > Yes, I did. > Two DC are still running on 3.6.3, and four others are running on 3.6.5. > Amongst the 3.6.5, some were updated from below, and some were installed > from scratch (so no negative legacy nor prehistoric RPMs or repos). > > > Greg one of the other maintainers recently did some performance > > improvements, I just don't remember which version they go into. either > > 3.6.5 or 3.6.6. > > May you Cc: to Greg? >
I asked him, he said 3.6.5 and 4.0. So if your 3.6.5 is the same then it didn't solve your issue obviously. I am completely out of things to try or see that could possibly be the problem. > > If I remember correctly for some reason it takes a long time to get > > data from the engine to your browser, we just don't know why it takes so > > long as we profiled the engine running in your environment and that was > > all fine as well. > > I recall correctly. > > I'm also witnessing memory leaks, that I think were fixed recently. _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users