Hello Today I've the faulty DIMMs replaced, started the same VM again and did the same migration and this time worked, so it was 100% due to that.
The problem that make me wonder a bit is: if it's the source host with memory problem the one which blocks the correct migration, a faulty DIMM will force you to stop the VMs running on that host, because you cannot simply migrate them away to do the maintenence tasks... 2016-09-29 13:53 GMT+02:00 Tomas Jelinek <[email protected]>: > > > ----- Original Message ----- > > From: "Davide Ferrari" <[email protected]> > > To: "users" <[email protected]> > > Sent: Wednesday, September 28, 2016 2:59:59 PM > > Subject: [ovirt-users] VM pauses/hangs after migration > > > > Hello > > > > trying to migrate a VM from one host to another, a big VM with 96GB of > RAM, I > > found that when the migration completes, the VM goes to a paused satte > and > > cannot be resumed. The libvirt/qemu log it gives is this: > > > > 2016-09-28T12:18:15.679176Z qemu-kvm: error while loading state section > id > > 2(ram) > > 2016-09-28T12:18:15.680010Z qemu-kvm: load of migration failed: > Input/output > > error > > 2016-09-28 12:18:15.872+0000: shutting down > > 2016-09-28 12:22:21.467+0000: starting up libvirt version: 1.2.17, > package: > > 13.el7_2.5 (CentOS BuildSystem < http://bugs.centos.org >, > > 2016-06-23-14:23:27, worker1.bsys.centos.org ), qemu version: 2.3.0 > > (qemu-kvm-ev-2.3.0-31.el7.16.1) > > LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin > > QEMU_AUDIO_DRV=spice /usr/libexec/qemu-kvm -name front04.billydomain.com > -S > > -machine pc-i440fx-rhel7.2.0,accel=kvm,usb=off -cpu Haswell-noTSX -m > > size=100663296k,slots=16,maxmem=4294967296k -realtime mlock=off -smp > > 32,sockets=16,cores=1,threads=2 -numa node,nodeid=0,cpus=0-31,mem=98304 > > -uuid 4511d1c0-6607-418f-ae75-34f605b2ad68 -smbios > > type=1,manufacturer=oVirt,product=oVirt > > Node,version=7-2.1511.el7.centos.2.10,serial=4C4C4544- > 004A-3310-8054-B2C04F474432,uuid=4511d1c0-6607-418f-ae75-34f605b2ad68 > > -no-user-config -nodefaults -chardev > > socket,id=charmonitor,path=/var/lib/libvirt/qemu/ > > domain-front04.billydomain.com/monitor.sock,server,nowait -mon > > chardev=charmonitor,id=monitor,mode=control -rtc > > base=2016-09-28T14:22:21,driftfix=slew -global > > kvm-pit.lost_tick_policy=discard -no-hpet -no-shutdown -boot strict=on > > -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device > > virtio-scsi-pci,id=scsi0,bus=pci.0,addr=0x7 -device > > virtio-serial-pci,id=virtio-serial0,max_ports=16,bus=pci.0,addr=0x4 > -drive > > if=none,id=drive-ide0-1-0,readonly=on,format=raw -device > > ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -drive > > file=/rhev/data-center/00000001-0001-0001-0001- > 0000000003e3/ba2bd397-9222-424d-aecc-eb652c0169d9/images/ > b5b49d5c-2378-4639-9469-362e37ae7473/24fd0d3c-309b- > 458d-9818-4321023afacf,if=none,id=drive-virtio-disk0, > format=qcow2,serial=b5b49d5c-2378-4639-9469-362e37ae7473, > cache=none,werror=stop,rerror=stop,aio=threads > > -device > > virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive- > virtio-disk0,id=virtio-disk0,bootindex=1 > > -drive > > file=/rhev/data-center/00000001-0001-0001-0001- > 0000000003e3/ba2bd397-9222-424d-aecc-eb652c0169d9/images/ > f02ac1ce-52cd-4b81-8b29-f8006d0469e0/ff4e49c6-3084- > 4234-80a1-18a67615c527,if=none,id=drive-virtio-disk1, > format=raw,serial=f02ac1ce-52cd-4b81-8b29-f8006d0469e0, > cache=none,werror=stop,rerror=stop,aio=threads > > -device > > virtio-blk-pci,scsi=off,bus=pci.0,addr=0x8,drive=drive- > virtio-disk1,id=virtio-disk1 > > -netdev tap,fd=30,id=hostnet0,vhost=on,vhostfd=31 -device > > virtio-net-pci,netdev=hostnet0,id=net0,mac=00:1a:4a: > 16:01:56,bus=pci.0,addr=0x3 > > -chardev > > socket,id=charchannel0,path=/var/lib/libvirt/qemu/channels/ > 4511d1c0-6607-418f-ae75-34f605b2ad68.com.redhat.rhevm.vdsm,server,nowait > > -device > > virtserialport,bus=virtio-serial0.0,nr=1,chardev= > charchannel0,id=channel0,name=com.redhat.rhevm.vdsm > > -chardev > > socket,id=charchannel1,path=/var/lib/libvirt/qemu/channels/ > 4511d1c0-6607-418f-ae75-34f605b2ad68.org.qemu.guest_agent.0,server,nowait > > -device > > virtserialport,bus=virtio-serial0.0,nr=2,chardev= > charchannel1,id=channel1,name=org.qemu.guest_agent.0 > > -chardev spicevmc,id=charchannel2,name=vdagent -device > > virtserialport,bus=virtio-serial0.0,nr=3,chardev= > charchannel2,id=channel2,name=com.redhat.spice.0 > > -vnc 192.168.10.225:1 ,password -k es -spice > > tls-port=5902,addr=192.168.10.225,x509-dir=/etc/pki/vdsm/ > libvirt-spice,tls-channel=default,tls-channel=main,tls- > channel=display,tls-channel=inputs,tls-channel=cursor,tls- > channel=playback,tls-channel=record,tls-channel=smartcard, > tls-channel=usbredir,seamless-migration=on > > -k es -device > > qxl-vga,id=video0,ram_size=67108864,vram_size=8388608, > vgamem_mb=16,bus=pci.0,addr=0x2 > > -incoming tcp: 0.0.0.0:49156 -device > > virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 -msg timestamp=on > > Domain id=5 is tainted: hook-script > > red_dispatcher_loadvm_commands: > > KVM: entry failed, hardware error 0x8 > > RAX=00000000ffffffed RBX=ffff8817ba00c000 RCX=0100000000000000 > > RDX=0000000000000000 > > RSI=0000000000000000 RDI=0000000000000046 RBP=ffff8817ba00fe98 > > RSP=ffff8817ba00fe98 > > R8 =0000000000000000 R9 =0000000000000000 R10=0000000000000000 > > R11=0000000000000000 > > R12=0000000000000006 R13=ffff8817ba00c000 R14=ffff8817ba00c000 > > R15=0000000000000000 > > RIP=ffffffff81058e96 RFL=00010286 [--S--P-] CPL=0 II=0 A20=1 SMM=0 HLT=0 > > ES =0000 0000000000000000 ffffffff 00000000 > > CS =0010 0000000000000000 ffffffff 00a09b00 DPL=0 CS64 [-RA] > > SS =0018 0000000000000000 ffffffff 00c09300 DPL=0 DS [-WA] > > DS =0000 0000000000000000 ffffffff 00000000 > > FS =0000 0000000000000000 ffffffff 00000000 > > GS =0000 ffff8817def80000 ffffffff 00000000 > > LDT=0000 0000000000000000 ffffffff 00000000 > > TR =0040 ffff8817def93b80 00002087 00008b00 DPL=0 TSS64-busy > > GDT= ffff8817def89000 0000007f > > IDT= ffffffffff529000 00000fff > > CR0=80050033 CR2=00000000ffffffff CR3=00000017b725b000 CR4=001406e0 > > DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 > > DR3=0000000000000000 > > DR6=00000000ffff0ff0 DR7=0000000000000400 > > EFER=0000000000000d01 > > Code=89 e5 fb 5d c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 fb f4 <5d> c3 > 0f > > 1f 84 00 00 00 00 00 55 48 89 e5 f4 5d c3 66 0f 1f 84 00 00 00 00 00 55 > 49 > > 89 ca > > KVM: entry failed, hardware error 0x8 > > RAX=00000000ffffffed RBX=ffff8817ba008000 RCX=0100000000000000 > > RDX=0000000000000000 > > RSI=0000000000000000 RDI=0000000000000046 RBP=ffff8817ba00be98 > > RSP=ffff8817ba00be98 > > R8 =0000000000000000 R9 =0000000000000000 R10=0000000000000000 > > R11=0000000000000000 > > R12=0000000000000005 R13=ffff8817ba008000 R14=ffff8817ba008000 > > R15=0000000000000000 > > RIP=ffffffff81058e96 RFL=00010286 [--S--P-] CPL=0 II=0 A20=1 SMM=0 HLT=0 > > ES =0000 0000000000000000 ffffffff 00000000 > > CS =0010 0000000000000000 ffffffff 00a09b00 DPL=0 CS64 [-RA] > > SS =0018 0000000000000000 ffffffff 00c09300 DPL=0 DS [-WA] > > DS =0000 0000000000000000 ffffffff 00000000 > > FS =0000 0000000000000000 ffffffff 00000000 > > GS =0000 ffff8817def40000 ffffffff 00000000 > > LDT=0000 0000000000000000 ffffffff 00000000 > > TR =0040 ffff8817def53b80 00002087 00008b00 DPL=0 TSS64-busy > > GDT= ffff8817def49000 0000007f > > IDT= ffffffffff529000 00000fff > > CR0=80050033 CR2=00000000ffffffff CR3=00000017b3c9a000 CR4=001406e0 > > DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 > > DR3=0000000000000000 > > DR6=00000000ffff0ff0 DR7=0000000000000400 > > EFER=0000000000000d01 > > Code=89 e5 fb 5d c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 fb f4 <5d> c3 > 0f > > 1f 84 00 00 00 00 00 55 48 89 e5 f4 5d c3 66 0f 1f 84 00 00 00 00 00 55 > 49 > > 89 ca > > KVM: entry failed, hardware error 0x80000021 > > > > If you're running a guest on an Intel machine without unrestricted mode > > support, the failure can be most likely due to the guest entering an > invalid > > state for Intel VT. For example, the guest maybe running in big real mode > > which is not supported on less recent Intel processors. > > > > EAX=ffffffed EBX=ba020000 ECX=00000000 EDX=00000000 > > ESI=00000000 EDI=00000046 EBP=ba023e98 ESP=ba023e98 > > EIP=81058e96 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 > > ES =0000 00000000 0000ffff 00009300 DPL=0 DS [-WA] > > CS =f000 ffff0000 0000ffff 00009b00 DPL=0 CS16 [-RA] > > SS =0000 00000000 0000ffff 00009300 DPL=0 DS [-WA] > > DS =0000 00000000 0000ffff 00009300 DPL=0 DS [-WA] > > FS =0000 00000000 0000ffff 00009300 DPL=0 DS [-WA] > > GS =0000 00000000 0000ffff 00009300 DPL=0 DS [-WA] > > LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT > > TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS64-busy > > GDT= 0000000000000000 0000ffff > > IDT= 0000000000000000 0000ffff > > CR0=80050033 CR2=00007fd826ac20a0 CR3=000000003516c000 CR4=00140060 > > DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 > > DR3=0000000000000000 > > DR6=00000000ffff0ff0 DR7=0000000000000400 > > EFER=0000000000000d01 > > Code=?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? <??> ?? > ?? > > ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? > ?? > > ?? ?? > > > > > > Searching for errors like this I found some bug report about kernel > issues > > but I don't think it's the case, other VMs spawned from the same image > > migrate without any issue. I have toi say that the original host running > the > > VM has some RAM problem (ECC multibit fault in one DIMM). Maybe that's > the > > problem? > > that seems quite likely. If you run the same VM on a different host and > try to migrate > it, does it work? > > > How can I properly read this error log? > > > > Thanks > > > > -- > > Davide Ferrari > > Senior Systems Engineer > > > > _______________________________________________ > > Users mailing list > > [email protected] > > http://lists.ovirt.org/mailman/listinfo/users > > > -- Davide Ferrari Senior Systems Engineer
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
