A wild guess, not sure if it is related - can you check if multipathd service is enabled. If you set up your oVirt-Gluster hyperconverged environment via gdeploy, multipathd service is disabled and the /etc/multipath.conf is edited to blacklist all devices - this was to fix https://bugzilla.redhat.com/show_bug.cgi?id=1303940
Since you mention you're unable to add iscsi storage only in this environment, thought it's worth checking. On Thu, Nov 3, 2016 at 6:40 AM, 胡茂荣 <[email protected]> wrote: > > my environment rpm are : > [root@horeba ~]# rpm -q vdsm > vdsm-4.18.13-1.el7.centos.x86_64 > > [root@horeba ~]# rpm -aq | grep ovirt > ovirt-vmconsole-host-1.0.4-1.el7.centos.noarch > ovirt-imageio-common-0.4.0-1.el7.noarch > ovirt-hosted-engine-setup-2.0.2.2-1.el7.centos.noarch > ovirt-imageio-daemon-0.4.0-1.el7.noarch > ovirt-engine-appliance-4.0-20160928.1.el7.centos.noarch > ovirt-vmconsole-1.0.4-1.el7.centos.noarch > ovirt-host-deploy-1.5.2-1.el7.centos.noarch > ovirt-hosted-engine-ha-2.0.4-1.el7.centos.noarch > ovirt-release40-4.0.4-1.noarch > ovirt-setup-lib-1.0.2-1.el7.centos.noarch > ovirt-engine-sdk-python-3.6.9.1-1.el7.centos.noarch > > and I test if not on ' ovirt and Glusterfs hyper-converged environment ' > , ovirt WEB UI add iscsi storage work ok . > > > ------------------ Original ------------------ > *From: * "Maor Lipchuk"<[email protected]>; > *Date: * Wed, Nov 2, 2016 07:37 PM > *To: * "胡茂荣"<[email protected]>; > *Cc: * "users"<[email protected]>; "Jeff Nelson"<[email protected]>; "Nir > Soffer"<[email protected]>; > *Subject: * Re: [ovirt-users] can not use iscsi storage type on > ovirtandGlusterfs hyper-converged environment > > Thanks for the logs, > > What kind of VDSM version are you using? > "rpm -q vdsm" > There seems to be a similar issue which was reported recently in the VDSM > area > (see https://bugzilla.redhat.com/show_bug.cgi?id=1197292) > It should be fixed in later versions of VDSM vdsm-4.16.12-2.el7ev.x86_64 > Adding also Nir and Jeff to the thread, if they have any insights > > Regards, > Maor > > On Wed, Nov 2, 2016 at 4:11 AM, 胡茂荣 <[email protected]> wrote: > >> >> Hi Maor: >> vdsm/supervdsm/engine log on attachment . I mkfs.xfs the lun block >> device and mount to /mnt , dd write ,dmesg not report error ,dd result is >> ok : >> >> /dev/sdi 50G 33M 50G 1% /mnt >> >> [root@horebc mnt]# for i in `seq 3`; do dd if=/dev/zero of=./file >> bs=1G count=1 oflag=direct ; done >> 1+0 records in >> 1+0 records out >> 1073741824 bytes (1.1 GB) copied, 13.3232 s, 80.6 MB/s >> 1+0 records in >> 1+0 records out >> 1073741824 bytes (1.1 GB) copied, 9.89988 s, 108 MB/s >> 1+0 records in >> 1+0 records out >> 1073741824 bytes (1.1 GB) copied, 14.0143 s, 76.6 MB/s >> >> my envirnment have three network segments (hosts have 3 network >> segments ) : >> engine and glusterfs mount : 192.168.11.X/24 >> glusterfs brick : 192.168.10.x/24 >> iscsi : 192.168.1.0/24 >> >> and I add 192.168.1.0/24 to engine vm , ovirt web UI report the >> same error . >> >> humaorong >> 2016-11-2 >> >> ------------------ Original ------------------ >> *From: * "Maor Lipchuk"<[email protected]>; >> *Date: * Tue, Nov 1, 2016 08:14 PM >> *To: * "胡茂荣"<[email protected]>; >> *Cc: * "users"<[email protected]>; >> *Subject: * Re: [ovirt-users] can not use iscsi storage type on ovirt >> andGlusterfs hyper-converged environment >> >> Hi 胡茂荣Can u please also add the VDSM and engine logs. >> If you try discover and connect to those luns directly from your Host >> does it work? >> >> Regards, >> Maor >> >> >> On Tue, Nov 1, 2016 at 6:12 AM, 胡茂荣 <[email protected]> wrote: >> >>> >>> >>> on ovirt and Glusterfs hyper-converged environment , can not use >>> iscsi storage type , UI report error: "Could not retrieve LUNs, please >>> check your storage." , vdsm report :"VDSM hosted_engine_3 command >>> failed: Error block device action: ()" . >>> but this block device alse login on centos 7 host : >>> ============================================================= >>> >>> ## lsscsi >>> >>> [7:0:0:0] disk SCST_BIO DEVFOR_OVIRT_rbd 221 /dev/sdi >>> >>> ## dmesg : >>> >>> [684521.131186] sd 7:0:0:0: [sdi] Attached SCSI disk >>> >>> ===================================--- >>> >>> ###vdsm or supervdsm log report : >>> >>> MainProcess|jsonrpc.Executor/7::ERROR::2016-11-01 >>> 11:07:00,178::supervdsmServer::96::SuperVdsm.ServerCallback::(wrapper) >>> Error in getPathsStatus >>> >>> MainProcess|jsonrpc.Executor/4::ERROR::2016-11-01 >>> 11:07:20,964::supervdsmServer::96::SuperVdsm.ServerCallback::(wrapper) >>> Error in getPathsStatus >>> >>> jsonrpc.Executor/4::DEBUG::2016-11-01 >>> 11:07:04,251::iscsi::434::Storage.ISCSI::(rescan) >>> Performing SCSI scan, this will take up to 30 seconds >>> >>> jsonrpc.Executor/5::INFO::2016-11-01 11:07:19,413::iscsi::567::Stor >>> age.ISCSI::(setRpFilterIfNeeded) iSCSI iface.net_ifacename not >>> provided. Skipping. >>> >>> 11:09:15,753::iscsiadm::119::Storage.Misc.excCmd::(_runCmd) >>> /usr/bin/taskset --cpu-list 0-7 /usr/bin/sudo -n /usr/sbin/iscsiadm -m >>> session -R (cwd None) >>> >>> ====================================== >>> >>> the other info please the attachment "bug-info.doc". >>> >>> this prolem on ovirt3.6 and 4.X ovirt and Glusterfs >>> hyper-converged environment . how can I use iscsi storage type on ovirt >>> and Glusterfs hyper-converged environment .Please help me ! >>> >>> humaorong >>> >>> 2016-11-1 >>> >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> Users mailing list >>> [email protected] >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> > > _______________________________________________ > Users mailing list > [email protected] > http://lists.ovirt.org/mailman/listinfo/users > >
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
