How did you create this port?
From the oVirt engine UI?
The OVN provider creates the port when you add the port in the engine UI,
it is then plugged into the ovs bridge by the VIF driver.
Please attach /var/log/ovirt-provider-ovn.log



----- Original Message -----
> From: "Sverker Abrahamsson" <sver...@abrahamsson.com>
> To: "Marcin Mirecki" <mmire...@redhat.com>
> Cc: "Ovirt Users" <users@ovirt.org>
> Sent: Tuesday, January 3, 2017 2:06:22 AM
> Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory ovirtmgmt network
> 
> Found an issue with Ovirt - OVN integration.
> 
> Engine and OVN central db running on host h2. Created VM to run on host
> h1, which is started. Ovn db state:
> 
> [root@h2 env3]# ovn-nbctl show
>      switch e53554cf-e553-40a1-8d22-9c8d95ec0601 (ovirtbridge)
>          port 4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873
>              addresses: ["00:1a:4a:16:01:51"]
>          port 92f6d3c8-68b3-4986-9c09-60bee04644b5
>              addresses: ["00:1a:4a:16:01:52"]
>          port ovirtbridge-port2
>              addresses: ["unknown"]
>          port ovirtbridge-port1
>              addresses: ["unknown"]
> [root@h2 env3]# ovn-sbctl show
> Chassis "6e4dd29f-7607-48d7-8e5a-eef4c6aeefb5"
>      hostname: "h2.limetransit.com"
>      Encap geneve
>          ip: "148.251.126.50"
>          options: {csum="true"}
>      Port_Binding "4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873"
>      Port_Binding "ovirtbridge-port1"
> Chassis "4f10fb04-8fb2-48d7-8a3f-ea6444c02cf9"
>      hostname: "h1.limetransit.com"
>      Encap geneve
>          ip: "144.76.84.73"
>          options: {csum="true"}
>      Port_Binding "ovirtbridge-port2"
> 
> Port 92f6d3c8-68b3-4986-9c09-60bee04644b5 is for the new VM which is
> started on h1, but it is not assigned to that chassis. The reason is
> that on h1 the port on br-int is created like this:
> 
> ovs-vsctl --timeout=5 -- --if-exists del-port vnet0 -- add-port br-int
> vnet0 -- set Interface vnet0
> "external-ids:attached-mac=\"00:1a:4a:16:01:52\"" -- set Interface vnet0
> "external-ids:iface-id=\"35bcbe31-2c7e-4d97-add9-ce150eeb2f11\"" -- set
> Interface vnet0
> "external-ids:vm-id=\"4d0c134a-11a0-40f4-b2fb-c13c17c7251c\"" -- set
> Interface vnet0 external-ids:iface-status=active
> 
> I.e. the extrernal id of interface is wrong. When I manually change to
> the right id like this the port works fine:
> 
> ovs-vsctl --timeout=5 -- --if-exists del-port vnet0 -- add-port br-int
> vnet0 -- set Interface vnet0
> "external-ids:attached-mac=\"00:1a:4a:16:01:52\"" -- set Interface vnet0
> "external-ids:iface-id=\"92f6d3c8-68b3-4986-9c09-60bee04644b5\"" -- set
> Interface vnet0
> "external-ids:vm-id=\"4d0c134a-11a0-40f4-b2fb-c13c17c7251c\"" -- set
> Interface vnet0 external-ids:iface-status=active
> 
> sb db after correcting the port:
> 
> Chassis "6e4dd29f-7607-48d7-8e5a-eef4c6aeefb5"
>      hostname: "h2.limetransit.com"
>      Encap geneve
>          ip: "148.251.126.50"
>          options: {csum="true"}
>      Port_Binding "4981ee5f-6e15-4bd5-a1cf-7ead9bdd5873"
>      Port_Binding "ovirtbridge-port1"
> Chassis "4f10fb04-8fb2-48d7-8a3f-ea6444c02cf9"
>      hostname: "h1.limetransit.com"
>      Encap geneve
>          ip: "144.76.84.73"
>          options: {csum="true"}
>      Port_Binding "ovirtbridge-port2"
>      Port_Binding "92f6d3c8-68b3-4986-9c09-60bee04644b5"
> 
> I don't know from where the faulty id comes from, it's not in any logs.
> In the domain xml as printed in vdsm.log the id is correct:
> 
>          <interface type="bridge">
>              <mac address="00:1a:4a:16:01:52" />
>              <model type="virtio" />
>              <source bridge="br-int" />
>              <virtualport type="openvswitch" />
>              <link state="up" />
>              <boot order="2" />
>              <bandwidth />
>              <virtualport type="openvswitch">
>                  <parameters
> interfaceid="92f6d3c8-68b3-4986-9c09-60bee04644b5" />
>              </virtualport>
>          </interface>
> 
> Where is the ovs-vsctl command line built for this call?
> 
> /Sverker
> 
> 
> Den 2017-01-02 kl. 13:40, skrev Sverker Abrahamsson:
> > Got it to work now by following the env8 example in OVN tutorial,
> > where a port is added with type l2gateway. Not sure how that is
> > different from the localnet variant, but didn't suceed in getting that
> > one working. Now I'm able to ping and telnet over the tunnel, but not
> > ssh even when the port is answering on telnet. Neither does nfs
> > traffic work even though mount did. Suspecting MTU issue. I did notice
> > that ovn-controller starts too early, before network interfaces are
> > established and hence can't reach the db. As these is a purely OVS/OVN
> > issue I'll ask about it on their mailing list.
> >
> > Getting back to the original issue with Ovirt, I've now added the
> > second host h1 to ovirt-engine. Had to do the same as with h2 to
> > create a dummy ovirtmgmt network but configured access via the public
> > IP. My firewall settings was replaced with iptables config and
> > vdsm.conf was overwritten when engine was set up, so those had to be
> > manually restored. It would be preferable if it would be possible to
> > configure ovirt-engine that it does not "own" the host and instead
> > comply with the settings it has instead of enforcing it's own view..
> >
> > Apart from that it seems the second host works, although I need to
> > resolve the traffic issue over the OVS tunnel.
> > /Sverker
> >
> > Den 2017-01-02 kl. 01:13, skrev Sverker Abrahamsson:
> >> 1. That is not possible as ovirt (or vdsm) will rewrite the network
> >> configuration to a non-working state. That is why I've set that if as
> >> hidden to vdsm and is why I'm keen on getting OVS/OVN to work
> >>
> >> 2. I've been reading the doc for OVN and starting to connect the
> >> dots, which is not trivial as it is complex. Some insights reached:
> >>
> >> First step is the OVN database, installed by openvswitch-ovn-central,
> >> which I currently have running on h2 host. The 'ovn-nbctl' and
> >> 'ovn-sbctl' commands are only possible to execute on a database node.
> >> Two ip's are given to 'vdsm-tool ovn-config <ip to database> <tunnel
> >> ip>' as arguments, where <ip to database> is how this OVN node
> >> reaches the database and <tunnel ip> is the ip to which other OVN
> >> nodes sets up a tunnel to this node. I.e. it is not for creating a
> >> tunnel to the database which I thought first from the description in
> >> blog post.
> >>
> >> The tunnel between OVN nodes is of type geneve which is a UDP based
> >> protocol but I have not been able to find anywhere which port is used
> >> so that I can open it in firewalld. I have added OVN on another host,
> >> called h1, and connected it to the db. I see there is traffic to the
> >> db port, but I don't see any geneve traffic between the nodes.
> >>
> >> Ovirt is now able to create it's vnet0 interface on the br-int ovs
> >> bridge, but then I run into the next issue. How do I create a
> >> connection from the logical switch to the physical host? I need that
> >> to a) get a connection out to the internet through a masqueraded if
> >> or ipv6 and b) be able to run a dhcp server to give ip's to the VM's.
> >>
> >> /Sverker
> >>
> >> Den 2016-12-30 kl. 18:05, skrev Marcin Mirecki:
> >>> 1. Why not use your physical nic for ovirtmgmt then?
> >>>
> >>> 2. "ovn-nbctl ls-add" does not add a bridge, but a logical switch.
> >>>     br-int is an internal OVN implementation detail, which the user
> >>>     should not care about. What you see in the ovirt UI are logical
> >>>     networks. They are implemented as OVN logical switches in case
> >>>     of the OVN provider.
> >>>
> >>> Please look at:
> >>> http://www.ovirt.org/blog/2016/11/ovirt-provider-ovn/
> >>> You can get the latest rpms from here:
> >>> http://resources.ovirt.org/repos/ovirt/experimental/master/ovirt-provider-ovn_fc24_46/rpm/fc24/noarch/
> >>>
> >>>
> >>> ----- Original Message -----
> >>>> From: "Sverker Abrahamsson" <sver...@abrahamsson.com>
> >>>> To: "Marcin Mirecki" <mmire...@redhat.com>
> >>>> Cc: "Ovirt Users" <users@ovirt.org>
> >>>> Sent: Friday, December 30, 2016 4:25:58 PM
> >>>> Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory
> >>>> ovirtmgmt network
> >>>>
> >>>> 1. No, I did not want to put the ovirtmgmt bridge on my physical
> >>>> nic as
> >>>> it always messed up the network config making the host unreachable. I
> >>>> have put a ovs bridge on this nic which I will use to make tunnels
> >>>> when
> >>>> I add other hosts. Maybe br-int will be used for that instead, will
> >>>> see
> >>>> when I get that far.
> >>>>
> >>>> As it is now I have a dummy if for ovirtmgmt bridge but this will
> >>>> probably not work when I add other hosts as that bridge cannot connect
> >>>> to the other hosts. I'm considering keeping this just as a dummy to
> >>>> keep
> >>>> ovirt engine satisfied while the actual communication will happen over
> >>>> OVN/OVS bridges and tunnels.
> >>>>
> >>>> 2. On
> >>>> https://www.ovirt.org//develop/release-management/features/ovirt-ovn-provider/
> >>>>
> >>>> there is instructions how to add an OVS bridge to OVN with |ovn-nbctl
> >>>> ls-add <network name>|. If you want to use br-int then it makes
> >>>> sense to
> >>>> make that bridge visible in ovirt webui under networks so that it
> >>>> can be
> >>>> selected for VM's.
> >>>>
> >>>> It quite doesn't make sense to me that I can select other network
> >>>> for my
> >>>> VM but then that setting is not used when setting up the network.
> >>>>
> >>>> /Sverker
> >>>>
> >>>> Den 2016-12-30 kl. 15:34, skrev Marcin Mirecki:
> >>>>> Hi,
> >>>>>
> >>>>> The OVN provider does not require you to add any bridges manually.
> >>>>> As I understand we were dealing with two problems:
> >>>>> 1. You only had one physical nic and wanted to put a bridge on it,
> >>>>>      attaching the management network to the bridge. This was the
> >>>>> reason for
> >>>>>      creating the bridge (the recommended setup would be to used a
> >>>>> separate
> >>>>>      physical nic for the management network). This bridge has
> >>>>> nothing to
> >>>>>      do with the OVN bridge.
> >>>>> 2. OVN - you want to use OVN on this system. For this you have to
> >>>>> install
> >>>>>      OVN on your hosts. This should create the br-int bridge,
> >>>>> which are
> >>>>>      then used by the OVN provider. This br-int bridge must be
> >>>>> configured
> >>>>>      to connect to other hosts using the geneve tunnels.
> >>>>>
> >>>>> In both cases the systems will not be aware of any bridges you
> >>>>> create.
> >>>>> They need a nic (be it physical or virtual) to connect to other
> >>>>> system.
> >>>>> Usually this is the physical nic. In your case you decided to put
> >>>>> a bridge
> >>>>> on the physical nic, and give oVirt a virtual nic attached to this
> >>>>> bridge.
> >>>>> This works, but keep in mind that the bridge you have introduced
> >>>>> is outside
> >>>>> of oVirt's (and OVN) control (and as such is not supported).
> >>>>>
> >>>>>> What is the purpose of
> >>>>>> adding my bridges to Ovirt through the external provider and
> >>>>>> configure
> >>>>>> them on my VM
> >>>>> I am not quite sure I understand.
> >>>>> The external provider (OVN provider to be specific), does not add any
> >>>>> bridges
> >>>>> to the system. It is using the br-int bridge created by OVN. The
> >>>>> networks
> >>>>> created by the OVN provider are purely logical entities,
> >>>>> implemented using
> >>>>> the OVN br-int bridge.
> >>>>>
> >>>>> Marcin
> >>>>>
> >>>>>
> >>>>> ----- Original Message -----
> >>>>>> From: "Sverker Abrahamsson" <sver...@abrahamsson.com>
> >>>>>> To: "Marcin Mirecki" <mmire...@redhat.com>
> >>>>>> Cc: "Ovirt Users" <users@ovirt.org>
> >>>>>> Sent: Friday, December 30, 2016 12:15:43 PM
> >>>>>> Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory
> >>>>>> ovirtmgmt
> >>>>>> network
> >>>>>>
> >>>>>> Hi
> >>>>>> That is the logic I quite don't understand. What is the purpose of
> >>>>>> adding my bridges to Ovirt through the external provider and
> >>>>>> configure
> >>>>>> them on my VM if you are disregarding that and using br-int anyway?
> >>>>>>
> >>>>>> /Sverker
> >>>>>>
> >>>>>> Den 2016-12-30 kl. 10:53, skrev Marcin Mirecki:
> >>>>>>> Sverker,
> >>>>>>>
> >>>>>>> br-int is the integration bridge created by default in OVN. This
> >>>>>>> is the
> >>>>>>> bridge we use for the OVN provider. As OVN is required to be
> >>>>>>> installed,
> >>>>>>> we assume that this bridge is present.
> >>>>>>> Using any other ovs bridge is not supported, and will require
> >>>>>>> custom code
> >>>>>>> changes (such as the ones you created).
> >>>>>>>
> >>>>>>> The proper setup in your case would probably be to create br-int
> >>>>>>> and
> >>>>>>> connect
> >>>>>>> this to your ovirtbridge, although I don't know the details of
> >>>>>>> your env,
> >>>>>>> so
> >>>>>>> this is just my best guess.
> >>>>>>>
> >>>>>>> Marcin
> >>>>>>>
> >>>>>>>
> >>>>>>> ----- Original Message -----
> >>>>>>>> From: "Sverker Abrahamsson" <sver...@abrahamsson.com>
> >>>>>>>> To: "Marcin Mirecki" <mmire...@redhat.com>
> >>>>>>>> Cc: "Ovirt Users" <users@ovirt.org>, "Numan Siddique"
> >>>>>>>> <nusid...@redhat.com>
> >>>>>>>> Sent: Friday, December 30, 2016 1:14:50 AM
> >>>>>>>> Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory
> >>>>>>>> ovirtmgmt
> >>>>>>>> network
> >>>>>>>>
> >>>>>>>> Even better, if the value is not hardcoded then the configured
> >>>>>>>> value is
> >>>>>>>> used. Might be that I'm missunderstanding something but this is
> >>>>>>>> the
> >>>>>>>> behaviour I expected instead of that it is using br-int.
> >>>>>>>>
> >>>>>>>> Attached is a patch which properly sets up the xml, in case
> >>>>>>>> there is
> >>>>>>>> already a virtual port there + testcode of some variants
> >>>>>>>>
> >>>>>>>> /Sverker
> >>>>>>>>
> >>>>>>>> Den 2016-12-29 kl. 22:55, skrev Sverker Abrahamsson:
> >>>>>>>>> When I change
> >>>>>>>>> /usr/libexec/vdsm/hooks/before_device_create/ovirt_provider_ovn_hook
> >>>>>>>>>
> >>>>>>>>> to instead of hardcoded to br-int use BRIDGE_NAME =
> >>>>>>>>> 'ovirtbridge' then
> >>>>>>>>> I get the expected behaviour and I get a working network
> >>>>>>>>> connectivity
> >>>>>>>>> in my VM with IP provided by dhcp.
> >>>>>>>>>
> >>>>>>>>> /Sverker
> >>>>>>>>>
> >>>>>>>>> Den 2016-12-29 kl. 22:07, skrev Sverker Abrahamsson:
> >>>>>>>>>> By default the vNic profile of my OVN bridge ovirtbridge gets a
> >>>>>>>>>> Network filter named vdsm-no-mac-spoofing. If I instead set
> >>>>>>>>>> No filter
> >>>>>>>>>> then I don't get those ebtables / iptables messages. It seems
> >>>>>>>>>> that
> >>>>>>>>>> there is some issue between ovirt/vdsm and firewalld, which
> >>>>>>>>>> we can
> >>>>>>>>>> put to the side for now.
> >>>>>>>>>>
> >>>>>>>>>> It is not clear for me why the port is added on br-int
> >>>>>>>>>> instead of the
> >>>>>>>>>> bridge I've assigned to the VM, which is ovirtbridge??
> >>>>>>>>>>
> >>>>>>>>>> /Sverker
> >>>>>>>>>>
> >>>>>>>>>> Den 2016-12-29 kl. 14:20, skrev Sverker Abrahamsson:
> >>>>>>>>>>> The specific command most likely fails because there is no
> >>>>>>>>>>> chain
> >>>>>>>>>>> named libvirt-J-vnet0, but when should that have been created?
> >>>>>>>>>>> /Sverker
> >>>>>>>>>>>
> >>>>>>>>>>> -------- Vidarebefordrat meddelande --------
> >>>>>>>>>>> Ämne:     Re: [ovirt-users] Issue with OVN/OVS and mandatory
> >>>>>>>>>>> ovirtmgmt
> >>>>>>>>>>> network
> >>>>>>>>>>> Datum:     Thu, 29 Dec 2016 08:06:29 -0500 (EST)
> >>>>>>>>>>> Från:     Marcin Mirecki <mmire...@redhat.com>
> >>>>>>>>>>> Till:     Sverker Abrahamsson <sver...@abrahamsson.com>
> >>>>>>>>>>> Kopia:     Ovirt Users <users@ovirt.org>, Lance Richardson
> >>>>>>>>>>> <lrich...@redhat.com>, Numan Siddique <nusid...@redhat.com>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Let me add the OVN team.
> >>>>>>>>>>>
> >>>>>>>>>>> Lance, Numan,
> >>>>>>>>>>>
> >>>>>>>>>>> Can you please look at this?
> >>>>>>>>>>>
> >>>>>>>>>>> Trying to plug a vNIC results in:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 ovs-vsctl:
> >>>>>>>>>>>>>>>>>> ovs|00001|vsctl|INFO|Called as
> >>>>>>>>>>>>>>>>>> ovs-vsctl
> >>>>>>>>>>>>>>>>>> --timeout=5 -- --if-exists del-port vnet0 -- add-port
> >>>>>>>>>>>>>>>>>> br-int
> >>>>>>>>>>>>>>>>>> vnet0 --
> >>>>>>>>>>>>>>>>>> set Interface vnet0
> >>>>>>>>>>>>>>>>>> "external-ids:attached-mac=\"00:1a:4a:16:01:51\""
> >>>>>>>>>>>>>>>>>> -- set Interface vnet0
> >>>>>>>>>>>>>>>>>> "external-ids:iface-id=\"e8853aac-8a75-41b0-8010-e630017dcdd8\""
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> --
> >>>>>>>>>>>>>>>>>> set Interface vnet0
> >>>>>>>>>>>>>>>>>> "external-ids:vm-id=\"b9440d60-ef5a-4e2b-83cf-081df7c09e6f\""
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> --
> >>>>>>>>>>>>>>>>>> set
> >>>>>>>>>>>>>>>>>> Interface vnet0 external-ids:iface-status=active
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 kernel: device vnet0 entered
> >>>>>>>>>>>>>>>>>> promiscuous
> >>>>>>>>>>>>>>>>>> mode
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -D PREROUTING
> >>>>>>>>>>>>>>>>>> -i vnet0
> >>>>>>>>>>>>>>>>>> -j
> >>>>>>>>>>>>>>>>>> libvirt-J-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>> More details below
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> ----- Original Message -----
> >>>>>>>>>>>> From: "Sverker Abrahamsson"<sver...@abrahamsson.com>
> >>>>>>>>>>>> To: "Marcin Mirecki"<mmire...@redhat.com>
> >>>>>>>>>>>> Cc: "Ovirt Users"<users@ovirt.org>
> >>>>>>>>>>>> Sent: Thursday, December 29, 2016 1:42:11 PM
> >>>>>>>>>>>> Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory
> >>>>>>>>>>>> ovirtmgmt
> >>>>>>>>>>>> network
> >>>>>>>>>>>>
> >>>>>>>>>>>> Hi
> >>>>>>>>>>>> Same problem still..
> >>>>>>>>>>>> /Sverker
> >>>>>>>>>>>>
> >>>>>>>>>>>> Den 2016-12-29 kl. 13:34, skrev Marcin Mirecki:
> >>>>>>>>>>>>> Hi,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> The tunnels are created to connect multiple OVN controllers.
> >>>>>>>>>>>>> If there is only one, there is no need for the tunnels, so
> >>>>>>>>>>>>> none
> >>>>>>>>>>>>> will be created, this is the correct behavior.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Does the problem still occur after setting configuring the
> >>>>>>>>>>>>> OVN-controller?
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Marcin
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> ----- Original Message -----
> >>>>>>>>>>>>>> From: "Sverker Abrahamsson"<sver...@abrahamsson.com>
> >>>>>>>>>>>>>> To: "Marcin Mirecki"<mmire...@redhat.com>
> >>>>>>>>>>>>>> Cc: "Ovirt Users"<users@ovirt.org>
> >>>>>>>>>>>>>> Sent: Thursday, December 29, 2016 11:44:32 AM
> >>>>>>>>>>>>>> Subject: Re: [ovirt-users] Issue with OVN/OVS and mandatory
> >>>>>>>>>>>>>> ovirtmgmt
> >>>>>>>>>>>>>> network
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Hi
> >>>>>>>>>>>>>> The rpm packages you listed in the other mail are
> >>>>>>>>>>>>>> installed but I
> >>>>>>>>>>>>>> had
> >>>>>>>>>>>>>> not run vdsm-tool ovn-config to create tunnel as the OVN
> >>>>>>>>>>>>>> controller
> >>>>>>>>>>>>>> is
> >>>>>>>>>>>>>> on the same host.
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> [root@h2 ~]# rpm -q openvswitch-ovn-common
> >>>>>>>>>>>>>> openvswitch-ovn-common-2.6.90-1.el7.centos.x86_64
> >>>>>>>>>>>>>> [root@h2 ~]# rpm -q openvswitch-ovn-host
> >>>>>>>>>>>>>> openvswitch-ovn-host-2.6.90-1.el7.centos.x86_64
> >>>>>>>>>>>>>> [root@h2 ~]# rpm -q python-openvswitch
> >>>>>>>>>>>>>> python-openvswitch-2.6.90-1.el7.centos.noarch
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> After removing my manually created br-int and run
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> vdsm-tool ovn-config 127.0.0.1 172.27.1.1
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> then I have the br-int but 'ip link show' does not show
> >>>>>>>>>>>>>> any link
> >>>>>>>>>>>>>> 'genev_sys_' nor does 'ovs-vsctl show' any port for ovn.
> >>>>>>>>>>>>>> I assume
> >>>>>>>>>>>>>> these
> >>>>>>>>>>>>>> are when there is an actual tunnel?
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> [root@h2 ~]# ovs-vsctl show
> >>>>>>>>>>>>>> ebb6aede-cbbc-4f4f-a88a-a9cd72b2bd23
> >>>>>>>>>>>>>>          Bridge br-int
> >>>>>>>>>>>>>>              fail_mode: secure
> >>>>>>>>>>>>>>              Port br-int
> >>>>>>>>>>>>>>                  Interface br-int
> >>>>>>>>>>>>>>                      type: internal
> >>>>>>>>>>>>>>          Bridge ovirtbridge
> >>>>>>>>>>>>>>              Port ovirtbridge
> >>>>>>>>>>>>>>                  Interface ovirtbridge
> >>>>>>>>>>>>>>                      type: internal
> >>>>>>>>>>>>>>          Bridge "ovsbridge0"
> >>>>>>>>>>>>>>              Port "ovsbridge0"
> >>>>>>>>>>>>>>                  Interface "ovsbridge0"
> >>>>>>>>>>>>>>                      type: internal
> >>>>>>>>>>>>>>              Port "eth0"
> >>>>>>>>>>>>>>                  Interface "eth0"
> >>>>>>>>>>>>>>          ovs_version: "2.6.90"
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> [root@h2 ~]# ip link show
> >>>>>>>>>>>>>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state
> >>>>>>>>>>>>>> UNKNOWN
> >>>>>>>>>>>>>> mode
> >>>>>>>>>>>>>> DEFAULT qlen 1
> >>>>>>>>>>>>>>          link/loopback 00:00:00:00:00:00 brd
> >>>>>>>>>>>>>> 00:00:00:00:00:00
> >>>>>>>>>>>>>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> >>>>>>>>>>>>>> pfifo_fast
> >>>>>>>>>>>>>> master ovs-system state UP mode DEFAULT qlen 1000
> >>>>>>>>>>>>>>          link/ether 44:8a:5b:84:7d:b3 brd ff:ff:ff:ff:ff:ff
> >>>>>>>>>>>>>> 3: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
> >>>>>>>>>>>>>> state
> >>>>>>>>>>>>>> DOWN
> >>>>>>>>>>>>>> mode
> >>>>>>>>>>>>>> DEFAULT qlen 1000
> >>>>>>>>>>>>>>          link/ether 5a:14:cf:28:47:e2 brd ff:ff:ff:ff:ff:ff
> >>>>>>>>>>>>>> 4: ovsbridge0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
> >>>>>>>>>>>>>> qdisc
> >>>>>>>>>>>>>> noqueue
> >>>>>>>>>>>>>> state UNKNOWN mode DEFAULT qlen 1000
> >>>>>>>>>>>>>>          link/ether 44:8a:5b:84:7d:b3 brd ff:ff:ff:ff:ff:ff
> >>>>>>>>>>>>>> 5: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
> >>>>>>>>>>>>>> state DOWN
> >>>>>>>>>>>>>> mode
> >>>>>>>>>>>>>> DEFAULT qlen 1000
> >>>>>>>>>>>>>>          link/ether 9e:b0:3a:9d:f2:4b brd ff:ff:ff:ff:ff:ff
> >>>>>>>>>>>>>> 6: ovirtbridge: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu
> >>>>>>>>>>>>>> 1500 qdisc
> >>>>>>>>>>>>>> noqueue
> >>>>>>>>>>>>>> state UNKNOWN mode DEFAULT qlen 1000
> >>>>>>>>>>>>>>          link/ether a6:f6:e5:a4:5b:45 brd ff:ff:ff:ff:ff:ff
> >>>>>>>>>>>>>> 7: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc
> >>>>>>>>>>>>>> noqueue
> >>>>>>>>>>>>>> master
> >>>>>>>>>>>>>> ovirtmgmt state UNKNOWN mode DEFAULT qlen 1000
> >>>>>>>>>>>>>>          link/ether 66:e0:1c:c3:a9:d8 brd ff:ff:ff:ff:ff:ff
> >>>>>>>>>>>>>> 8: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
> >>>>>>>>>>>>>> qdisc
> >>>>>>>>>>>>>> noqueue
> >>>>>>>>>>>>>> state UP mode DEFAULT qlen 1000
> >>>>>>>>>>>>>>          link/ether 66:e0:1c:c3:a9:d8 brd ff:ff:ff:ff:ff:ff
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Firewall settings:
> >>>>>>>>>>>>>> [root@h2 ~]# firewall-cmd --list-all-zones
> >>>>>>>>>>>>>> work
> >>>>>>>>>>>>>>        target: default
> >>>>>>>>>>>>>>        icmp-block-inversion: no
> >>>>>>>>>>>>>>        interfaces:
> >>>>>>>>>>>>>>        sources:
> >>>>>>>>>>>>>>        services: dhcpv6-client ssh
> >>>>>>>>>>>>>>        ports:
> >>>>>>>>>>>>>>        protocols:
> >>>>>>>>>>>>>>        masquerade: no
> >>>>>>>>>>>>>>        forward-ports:
> >>>>>>>>>>>>>>        sourceports:
> >>>>>>>>>>>>>>        icmp-blocks:
> >>>>>>>>>>>>>>        rich rules:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> drop
> >>>>>>>>>>>>>>        target: DROP
> >>>>>>>>>>>>>>        icmp-block-inversion: no
> >>>>>>>>>>>>>>        interfaces:
> >>>>>>>>>>>>>>        sources:
> >>>>>>>>>>>>>>        services:
> >>>>>>>>>>>>>>        ports:
> >>>>>>>>>>>>>>        protocols:
> >>>>>>>>>>>>>>        masquerade: no
> >>>>>>>>>>>>>>        forward-ports:
> >>>>>>>>>>>>>>        sourceports:
> >>>>>>>>>>>>>>        icmp-blocks:
> >>>>>>>>>>>>>>        rich rules:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> internal
> >>>>>>>>>>>>>>        target: default
> >>>>>>>>>>>>>>        icmp-block-inversion: no
> >>>>>>>>>>>>>>        interfaces:
> >>>>>>>>>>>>>>        sources:
> >>>>>>>>>>>>>>        services: dhcpv6-client mdns samba-client ssh
> >>>>>>>>>>>>>>        ports:
> >>>>>>>>>>>>>>        protocols:
> >>>>>>>>>>>>>>        masquerade: no
> >>>>>>>>>>>>>>        forward-ports:
> >>>>>>>>>>>>>>        sourceports:
> >>>>>>>>>>>>>>        icmp-blocks:
> >>>>>>>>>>>>>>        rich rules:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> external
> >>>>>>>>>>>>>>        target: default
> >>>>>>>>>>>>>>        icmp-block-inversion: no
> >>>>>>>>>>>>>>        interfaces:
> >>>>>>>>>>>>>>        sources:
> >>>>>>>>>>>>>>        services: ssh
> >>>>>>>>>>>>>>        ports:
> >>>>>>>>>>>>>>        protocols:
> >>>>>>>>>>>>>>        masquerade: yes
> >>>>>>>>>>>>>>        forward-ports:
> >>>>>>>>>>>>>>        sourceports:
> >>>>>>>>>>>>>>        icmp-blocks:
> >>>>>>>>>>>>>>        rich rules:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> trusted
> >>>>>>>>>>>>>>        target: ACCEPT
> >>>>>>>>>>>>>>        icmp-block-inversion: no
> >>>>>>>>>>>>>>        interfaces:
> >>>>>>>>>>>>>>        sources:
> >>>>>>>>>>>>>>        services:
> >>>>>>>>>>>>>>        ports:
> >>>>>>>>>>>>>>        protocols:
> >>>>>>>>>>>>>>        masquerade: no
> >>>>>>>>>>>>>>        forward-ports:
> >>>>>>>>>>>>>>        sourceports:
> >>>>>>>>>>>>>>        icmp-blocks:
> >>>>>>>>>>>>>>        rich rules:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> home
> >>>>>>>>>>>>>>        target: default
> >>>>>>>>>>>>>>        icmp-block-inversion: no
> >>>>>>>>>>>>>>        interfaces:
> >>>>>>>>>>>>>>        sources:
> >>>>>>>>>>>>>>        services: dhcpv6-client mdns samba-client ssh
> >>>>>>>>>>>>>>        ports:
> >>>>>>>>>>>>>>        protocols:
> >>>>>>>>>>>>>>        masquerade: no
> >>>>>>>>>>>>>>        forward-ports:
> >>>>>>>>>>>>>>        sourceports:
> >>>>>>>>>>>>>>        icmp-blocks:
> >>>>>>>>>>>>>>        rich rules:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> dmz
> >>>>>>>>>>>>>>        target: default
> >>>>>>>>>>>>>>        icmp-block-inversion: no
> >>>>>>>>>>>>>>        interfaces:
> >>>>>>>>>>>>>>        sources:
> >>>>>>>>>>>>>>        services: ssh
> >>>>>>>>>>>>>>        ports:
> >>>>>>>>>>>>>>        protocols:
> >>>>>>>>>>>>>>        masquerade: no
> >>>>>>>>>>>>>>        forward-ports:
> >>>>>>>>>>>>>>        sourceports:
> >>>>>>>>>>>>>>        icmp-blocks:
> >>>>>>>>>>>>>>        rich rules:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> public (active)
> >>>>>>>>>>>>>>        target: default
> >>>>>>>>>>>>>>        icmp-block-inversion: no
> >>>>>>>>>>>>>>        interfaces: eth0 ovsbridge0
> >>>>>>>>>>>>>>        sources:
> >>>>>>>>>>>>>>        services: dhcpv6-client ssh
> >>>>>>>>>>>>>>        ports:
> >>>>>>>>>>>>>>        protocols:
> >>>>>>>>>>>>>>        masquerade: no
> >>>>>>>>>>>>>>        forward-ports:
> >>>>>>>>>>>>>>        sourceports:
> >>>>>>>>>>>>>>        icmp-blocks:
> >>>>>>>>>>>>>>        rich rules:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> block
> >>>>>>>>>>>>>>        target: %%REJECT%%
> >>>>>>>>>>>>>>        icmp-block-inversion: no
> >>>>>>>>>>>>>>        interfaces:
> >>>>>>>>>>>>>>        sources:
> >>>>>>>>>>>>>>        services:
> >>>>>>>>>>>>>>        ports:
> >>>>>>>>>>>>>>        protocols:
> >>>>>>>>>>>>>>        masquerade: no
> >>>>>>>>>>>>>>        forward-ports:
> >>>>>>>>>>>>>>        sourceports:
> >>>>>>>>>>>>>>        icmp-blocks:
> >>>>>>>>>>>>>>        rich rules:
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> ovirt (active)
> >>>>>>>>>>>>>>        target: default
> >>>>>>>>>>>>>>        icmp-block-inversion: no
> >>>>>>>>>>>>>>        interfaces: ovirtbridge ovirtmgmt
> >>>>>>>>>>>>>>        sources:
> >>>>>>>>>>>>>>        services: dhcp ovirt-fence-kdump-listener ovirt-http
> >>>>>>>>>>>>>>        ovirt-https
> >>>>>>>>>>>>>> ovirt-imageio-proxy ovirt-postgres ovirt-provider-ovn
> >>>>>>>>>>>>>> ovirt-vmconsole-proxy ovirt-websocket-proxy ssh vdsm
> >>>>>>>>>>>>>>        ports:
> >>>>>>>>>>>>>>        protocols:
> >>>>>>>>>>>>>>        masquerade: yes
> >>>>>>>>>>>>>>        forward-ports:
> >>>>>>>>>>>>>>        sourceports:
> >>>>>>>>>>>>>>        icmp-blocks:
> >>>>>>>>>>>>>>        rich rules:
> >>>>>>>>>>>>>>              rule family="ipv4" port port="6641"
> >>>>>>>>>>>>>> protocol="tcp"
> >>>>>>>>>>>>>>              accept
> >>>>>>>>>>>>>>              rule family="ipv4" port port="6642"
> >>>>>>>>>>>>>> protocol="tcp"
> >>>>>>>>>>>>>>              accept
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> The db dump is attached
> >>>>>>>>>>>>>> /Sverker
> >>>>>>>>>>>>>> Den 2016-12-29 kl. 09:50, skrev Marcin Mirecki:
> >>>>>>>>>>>>>>> Hi,
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Can you please do: "sudo ovsdb-client dump"
> >>>>>>>>>>>>>>> on the host and send me the output?
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Have you configured the ovn controller to connect to the
> >>>>>>>>>>>>>>> OVN north? You can do it using "vdsm-tool ovn-config" or
> >>>>>>>>>>>>>>> using the OVN tools directly.
> >>>>>>>>>>>>>>> Please check
> >>>>>>>>>>>>>>> out:https://www.ovirt.org/blog/2016/11/ovirt-provider-ovn/
> >>>>>>>>>>>>>>> for details.
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Also please note that the OVN provider is completely
> >>>>>>>>>>>>>>> different
> >>>>>>>>>>>>>>> from the neutron-openvswitch plugin. Please don't mix
> >>>>>>>>>>>>>>> the two.
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> Marcin
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>> ----- Original Message -----
> >>>>>>>>>>>>>>>> From: "Marcin Mirecki"<mmire...@redhat.com>
> >>>>>>>>>>>>>>>> To: "Sverker Abrahamsson"<sver...@abrahamsson.com>
> >>>>>>>>>>>>>>>> Cc: "Ovirt Users"<users@ovirt.org>
> >>>>>>>>>>>>>>>> Sent: Thursday, December 29, 2016 9:27:19 AM
> >>>>>>>>>>>>>>>> Subject: Re: [ovirt-users] Issue with OVN/OVS and
> >>>>>>>>>>>>>>>> mandatory
> >>>>>>>>>>>>>>>> ovirtmgmt
> >>>>>>>>>>>>>>>> network
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Hi,
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> br-int is the OVN integration bridge, it should have been
> >>>>>>>>>>>>>>>> created
> >>>>>>>>>>>>>>>> when installing OVN. I assume you have the following
> >>>>>>>>>>>>>>>> packages
> >>>>>>>>>>>>>>>> installed
> >>>>>>>>>>>>>>>> on the host:
> >>>>>>>>>>>>>>>>          openvswitch-ovn-common
> >>>>>>>>>>>>>>>>          openvswitch-ovn-host
> >>>>>>>>>>>>>>>>          python-openvswitch
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Please give me some time to look at the connectivity
> >>>>>>>>>>>>>>>> problem.
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> Marcin
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>> ----- Original Message -----
> >>>>>>>>>>>>>>>>> From: "Sverker Abrahamsson"<sver...@abrahamsson.com>
> >>>>>>>>>>>>>>>>> To: "Marcin Mirecki"<mmire...@redhat.com>
> >>>>>>>>>>>>>>>>> Cc: "Ovirt Users"<users@ovirt.org>
> >>>>>>>>>>>>>>>>> Sent: Thursday, December 29, 2016 12:47:04 AM
> >>>>>>>>>>>>>>>>> Subject: Re: [ovirt-users] Issue with OVN/OVS and
> >>>>>>>>>>>>>>>>> mandatory
> >>>>>>>>>>>>>>>>> ovirtmgmt
> >>>>>>>>>>>>>>>>> network
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> From
> >>>>>>>>>>>>>>>>> /usr/libexec/vdsm/hooks/before_device_create/ovirt_provider_ovn_hook
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> (installed by ovirt-provider-ovn-driver rpm):
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> BRIDGE_NAME = 'br-int'
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>> Den 2016-12-28 kl. 23:56, skrev Sverker Abrahamsson:
> >>>>>>>>>>>>>>>>>> Googling on the message about br-int suggested adding
> >>>>>>>>>>>>>>>>>> that
> >>>>>>>>>>>>>>>>>> bridge to
> >>>>>>>>>>>>>>>>>> ovs:
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> ovs-vsctl add-br br-int
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> Then the VM is able to boot, but it fails to get network
> >>>>>>>>>>>>>>>>>> connectivity.
> >>>>>>>>>>>>>>>>>> Output in /var/log/messages:
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 ovs-vsctl:
> >>>>>>>>>>>>>>>>>> ovs|00001|vsctl|INFO|Called as
> >>>>>>>>>>>>>>>>>> ovs-vsctl
> >>>>>>>>>>>>>>>>>> --timeout=5 -- --if-exists del-port vnet0 -- add-port
> >>>>>>>>>>>>>>>>>> br-int
> >>>>>>>>>>>>>>>>>> vnet0 --
> >>>>>>>>>>>>>>>>>> set Interface vnet0
> >>>>>>>>>>>>>>>>>> "external-ids:attached-mac=\"00:1a:4a:16:01:51\""
> >>>>>>>>>>>>>>>>>> -- set Interface vnet0
> >>>>>>>>>>>>>>>>>> "external-ids:iface-id=\"e8853aac-8a75-41b0-8010-e630017dcdd8\""
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> --
> >>>>>>>>>>>>>>>>>> set Interface vnet0
> >>>>>>>>>>>>>>>>>> "external-ids:vm-id=\"b9440d60-ef5a-4e2b-83cf-081df7c09e6f\""
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> --
> >>>>>>>>>>>>>>>>>> set
> >>>>>>>>>>>>>>>>>> Interface vnet0 external-ids:iface-status=active
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 kernel: device vnet0 entered
> >>>>>>>>>>>>>>>>>> promiscuous
> >>>>>>>>>>>>>>>>>> mode
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -D PREROUTING
> >>>>>>>>>>>>>>>>>> -i vnet0
> >>>>>>>>>>>>>>>>>> -j
> >>>>>>>>>>>>>>>>>> libvirt-J-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -D
> >>>>>>>>>>>>>>>>>> POSTROUTING -o
> >>>>>>>>>>>>>>>>>> vnet0
> >>>>>>>>>>>>>>>>>> -j
> >>>>>>>>>>>>>>>>>> libvirt-P-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -L
> >>>>>>>>>>>>>>>>>> libvirt-J-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -L
> >>>>>>>>>>>>>>>>>> libvirt-P-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -F
> >>>>>>>>>>>>>>>>>> libvirt-J-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -X
> >>>>>>>>>>>>>>>>>> libvirt-J-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -F
> >>>>>>>>>>>>>>>>>> libvirt-P-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -X
> >>>>>>>>>>>>>>>>>> libvirt-P-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -F J-vnet0-mac'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -X J-vnet0-mac'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -F
> >>>>>>>>>>>>>>>>>> J-vnet0-arp-mac'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -X
> >>>>>>>>>>>>>>>>>> J-vnet0-arp-mac'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/iptables -w2 -w -D libvirt-out -m physdev
> >>>>>>>>>>>>>>>>>> --physdev-is-bridged --physdev-out vnet0 -g FO-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/iptables -w2 -w -D libvirt-out -m physdev
> >>>>>>>>>>>>>>>>>> --physdev-out
> >>>>>>>>>>>>>>>>>> vnet0 -g FO-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/iptables -w2 -w -D libvirt-in -m physdev
> >>>>>>>>>>>>>>>>>> --physdev-in
> >>>>>>>>>>>>>>>>>> vnet0
> >>>>>>>>>>>>>>>>>> -g FI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/iptables -w2 -w -D libvirt-host-in -m physdev
> >>>>>>>>>>>>>>>>>> --physdev-in
> >>>>>>>>>>>>>>>>>> vnet0 -g HI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/iptables -w2 -w -F FO-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/iptables -w2 -w -X FO-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/iptables -w2 -w -F FI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/iptables -w2 -w -X FI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/iptables -w2 -w -F HI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/iptables -w2 -w -X HI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/iptables -w2 -w -E FP-vnet0 FO-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/iptables -w2 -w -E FJ-vnet0 FI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/iptables -w2 -w -E HJ-vnet0 HI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ip6tables -w2 -w -D libvirt-out -m physdev
> >>>>>>>>>>>>>>>>>> --physdev-is-bridged --physdev-out vnet0 -g FO-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ip6tables -w2 -w -D libvirt-out -m physdev
> >>>>>>>>>>>>>>>>>> --physdev-out
> >>>>>>>>>>>>>>>>>> vnet0 -g FO-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ip6tables -w2 -w -D libvirt-in -m physdev
> >>>>>>>>>>>>>>>>>> --physdev-in
> >>>>>>>>>>>>>>>>>> vnet0 -g FI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ip6tables -w2 -w -D libvirt-host-in -m
> >>>>>>>>>>>>>>>>>> physdev
> >>>>>>>>>>>>>>>>>> --physdev-in
> >>>>>>>>>>>>>>>>>> vnet0 -g HI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ip6tables -w2 -w -F FO-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ip6tables -w2 -w -X FO-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ip6tables -w2 -w -F FI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ip6tables -w2 -w -X FI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ip6tables -w2 -w -F HI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ip6tables -w2 -w -X HI-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ip6tables -w2 -w -E FP-vnet0 FO-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ip6tables -w2 -w -E FJ-vnet0 FI-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ip6tables -w2 -w -E HJ-vnet0 HI-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -D PREROUTING
> >>>>>>>>>>>>>>>>>> -i vnet0
> >>>>>>>>>>>>>>>>>> -j
> >>>>>>>>>>>>>>>>>> libvirt-I-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -D
> >>>>>>>>>>>>>>>>>> POSTROUTING -o
> >>>>>>>>>>>>>>>>>> vnet0
> >>>>>>>>>>>>>>>>>> -j
> >>>>>>>>>>>>>>>>>> libvirt-O-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -L
> >>>>>>>>>>>>>>>>>> libvirt-I-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -L
> >>>>>>>>>>>>>>>>>> libvirt-O-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -F
> >>>>>>>>>>>>>>>>>> libvirt-I-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -X
> >>>>>>>>>>>>>>>>>> libvirt-I-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -F
> >>>>>>>>>>>>>>>>>> libvirt-O-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -X
> >>>>>>>>>>>>>>>>>> libvirt-O-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -L
> >>>>>>>>>>>>>>>>>> libvirt-P-vnet0'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -E
> >>>>>>>>>>>>>>>>>> libvirt-P-vnet0
> >>>>>>>>>>>>>>>>>> libvirt-O-vnet0' failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -F I-vnet0-mac'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -X I-vnet0-mac'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -F
> >>>>>>>>>>>>>>>>>> I-vnet0-arp-mac'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>> Dec 28 23:31:35 h2 firewalld: WARNING: COMMAND_FAILED:
> >>>>>>>>>>>>>>>>>> '/usr/sbin/ebtables --concurrent -t nat -X
> >>>>>>>>>>>>>>>>>> I-vnet0-arp-mac'
> >>>>>>>>>>>>>>>>>> failed:
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> [root@h2 etc]# ovs-vsctl show
> >>>>>>>>>>>>>>>>>> ebb6aede-cbbc-4f4f-a88a-a9cd72b2bd23
> >>>>>>>>>>>>>>>>>>          Bridge ovirtbridge
> >>>>>>>>>>>>>>>>>>              Port "ovirtport0"
> >>>>>>>>>>>>>>>>>>                  Interface "ovirtport0"
> >>>>>>>>>>>>>>>>>>                      type: internal
> >>>>>>>>>>>>>>>>>>              Port ovirtbridge
> >>>>>>>>>>>>>>>>>>                  Interface ovirtbridge
> >>>>>>>>>>>>>>>>>>                      type: internal
> >>>>>>>>>>>>>>>>>>          Bridge "ovsbridge0"
> >>>>>>>>>>>>>>>>>>              Port "ovsbridge0"
> >>>>>>>>>>>>>>>>>>                  Interface "ovsbridge0"
> >>>>>>>>>>>>>>>>>>                      type: internal
> >>>>>>>>>>>>>>>>>>              Port "eth0"
> >>>>>>>>>>>>>>>>>>                  Interface "eth0"
> >>>>>>>>>>>>>>>>>>          Bridge br-int
> >>>>>>>>>>>>>>>>>>              Port br-int
> >>>>>>>>>>>>>>>>>>                  Interface br-int
> >>>>>>>>>>>>>>>>>>                      type: internal
> >>>>>>>>>>>>>>>>>>              Port "vnet0"
> >>>>>>>>>>>>>>>>>>                  Interface "vnet0"
> >>>>>>>>>>>>>>>>>>          ovs_version: "2.6.90"
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> Searching through the code it appears that br-int
> >>>>>>>>>>>>>>>>>> comes from
> >>>>>>>>>>>>>>>>>> neutron-openvswitch plugin ??
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> [root@h2 share]# rpm -qf
> >>>>>>>>>>>>>>>>>> /usr/share/otopi/plugins/ovirt-host-deploy/openstack/neutron_openvswitch.py
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> ovirt-host-deploy-1.6.0-0.0.master.20161215101008.gitb76ad50.el7.centos.noarch
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> /Sverker
> >>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>> Den 2016-12-28 kl. 23:24, skrev Sverker Abrahamsson:
> >>>>>>>>>>>>>>>>>>> In addition I had to add an alias to modprobe:
> >>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>> [root@h2 modprobe.d]# cat dummy.conf
> >>>>>>>>>>>>>>>>>>> alias dummy0 dummy
> >>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>> Den 2016-12-28 kl. 23:03, skrev Sverker Abrahamsson:
> >>>>>>>>>>>>>>>>>>>> Hi
> >>>>>>>>>>>>>>>>>>>> I first tried to set device name to dummy_0, but
> >>>>>>>>>>>>>>>>>>>> then ifup
> >>>>>>>>>>>>>>>>>>>> did
> >>>>>>>>>>>>>>>>>>>> not
> >>>>>>>>>>>>>>>>>>>> succeed in creating the device unless I first did
> >>>>>>>>>>>>>>>>>>>> 'ip link
> >>>>>>>>>>>>>>>>>>>> add
> >>>>>>>>>>>>>>>>>>>> dummy_0 type dummy' but then it would not suceed to
> >>>>>>>>>>>>>>>>>>>> establish
> >>>>>>>>>>>>>>>>>>>> the if
> >>>>>>>>>>>>>>>>>>>> on reboot.
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> Setting fake_nics = dummy0 would not work neither,
> >>>>>>>>>>>>>>>>>>>> but this
> >>>>>>>>>>>>>>>>>>>> works:
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> fake_nics = dummy*
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> The engine is now able to find the if and assign
> >>>>>>>>>>>>>>>>>>>> bridge
> >>>>>>>>>>>>>>>>>>>> ovirtmgmt to
> >>>>>>>>>>>>>>>>>>>> it.
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> However, I then run into the next issue when
> >>>>>>>>>>>>>>>>>>>> starting a VM:
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> 2016-12-28 22:28:23,897 ERROR
> >>>>>>>>>>>>>>>>>>>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> (ForkJoinPool-1-worker-2) [] Correlation ID: null,
> >>>>>>>>>>>>>>>>>>>> Call
> >>>>>>>>>>>>>>>>>>>> Stack:
> >>>>>>>>>>>>>>>>>>>> null,
> >>>>>>>>>>>>>>>>>>>> Custom Event ID: -1, Message: VM CentOS7 is down
> >>>>>>>>>>>>>>>>>>>> with error.
> >>>>>>>>>>>>>>>>>>>> Exit
> >>>>>>>>>>>>>>>>>>>> message: Cannot get interface MTU on 'br-int': No such
> >>>>>>>>>>>>>>>>>>>> device.
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> This VM has a nic on ovirtbridge, which comes from
> >>>>>>>>>>>>>>>>>>>> the OVN
> >>>>>>>>>>>>>>>>>>>> provider.
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> /Sverker
> >>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> Den 2016-12-28 kl. 14:38, skrev Marcin Mirecki:
> >>>>>>>>>>>>>>>>>>>>> Sverker,
> >>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>> Can you try adding a vnic named veth_* or dummy_*,
> >>>>>>>>>>>>>>>>>>>>> (or alternatively add the name of the vnic to
> >>>>>>>>>>>>>>>>>>>>> vdsm.config fake_nics), and setup the management
> >>>>>>>>>>>>>>>>>>>>> network using this vnic?
> >>>>>>>>>>>>>>>>>>>>> I suppose adding the vnic you use for connecting
> >>>>>>>>>>>>>>>>>>>>> to the engine to fake_nics should make it visible
> >>>>>>>>>>>>>>>>>>>>> to the engine, and you should be able to use it for
> >>>>>>>>>>>>>>>>>>>>> the setup.
> >>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>> Marcin
> >>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>> ----- Original Message -----
> >>>>>>>>>>>>>>>>>>>>>> From: "Marcin Mirecki"<mmire...@redhat.com>
> >>>>>>>>>>>>>>>>>>>>>> To: "Sverker Abrahamsson"<sver...@abrahamsson.com>
> >>>>>>>>>>>>>>>>>>>>>> Cc: "Ovirt Users"<users@ovirt.org>
> >>>>>>>>>>>>>>>>>>>>>> Sent: Wednesday, December 28, 2016 12:06:26 PM
> >>>>>>>>>>>>>>>>>>>>>> Subject: Re: [ovirt-users] Issue with OVN/OVS and
> >>>>>>>>>>>>>>>>>>>>>> mandatory
> >>>>>>>>>>>>>>>>>>>>>> ovirtmgmt network
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> I have an internal OVS bridge called ovirtbridge
> >>>>>>>>>>>>>>>>>>>>>>> which
> >>>>>>>>>>>>>>>>>>>>>>> has
> >>>>>>>>>>>>>>>>>>>>>>> a port
> >>>>>>>>>>>>>>>>>>>>>>> with
> >>>>>>>>>>>>>>>>>>>>>>> IP address, but in the host network settings
> >>>>>>>>>>>>>>>>>>>>>>> that port is
> >>>>>>>>>>>>>>>>>>>>>>> not
> >>>>>>>>>>>>>>>>>>>>>>> visible.
> >>>>>>>>>>>>>>>>>>>>>> I just verified and unfortunately the virtual
> >>>>>>>>>>>>>>>>>>>>>> ports are
> >>>>>>>>>>>>>>>>>>>>>> not
> >>>>>>>>>>>>>>>>>>>>>> visible in engine
> >>>>>>>>>>>>>>>>>>>>>> to assign a network to :(
> >>>>>>>>>>>>>>>>>>>>>> I'm afraid that the engine is not ready for such a
> >>>>>>>>>>>>>>>>>>>>>> scenario
> >>>>>>>>>>>>>>>>>>>>>> (even
> >>>>>>>>>>>>>>>>>>>>>> if it
> >>>>>>>>>>>>>>>>>>>>>> works).
> >>>>>>>>>>>>>>>>>>>>>> Please give me some time to look for a solution.
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>> ----- Original Message -----
> >>>>>>>>>>>>>>>>>>>>>>> From: "Sverker
> >>>>>>>>>>>>>>>>>>>>>>> Abrahamsson"<sver...@abrahamsson.com>
> >>>>>>>>>>>>>>>>>>>>>>> To: "Marcin Mirecki"<mmire...@redhat.com>
> >>>>>>>>>>>>>>>>>>>>>>> Cc: "Ovirt Users"<users@ovirt.org>
> >>>>>>>>>>>>>>>>>>>>>>> Sent: Wednesday, December 28, 2016 11:48:24 AM
> >>>>>>>>>>>>>>>>>>>>>>> Subject: Re: [ovirt-users] Issue with OVN/OVS and
> >>>>>>>>>>>>>>>>>>>>>>> mandatory
> >>>>>>>>>>>>>>>>>>>>>>> ovirtmgmt
> >>>>>>>>>>>>>>>>>>>>>>> network
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> Hi Marcin
> >>>>>>>>>>>>>>>>>>>>>>> Yes, that is my issue. I don't want to let
> >>>>>>>>>>>>>>>>>>>>>>> ovirt/vdsm see
> >>>>>>>>>>>>>>>>>>>>>>> eth0
> >>>>>>>>>>>>>>>>>>>>>>> nor
> >>>>>>>>>>>>>>>>>>>>>>> ovsbridge0 since as soon as it sees them it
> >>>>>>>>>>>>>>>>>>>>>>> messes up the
> >>>>>>>>>>>>>>>>>>>>>>> network
> >>>>>>>>>>>>>>>>>>>>>>> config
> >>>>>>>>>>>>>>>>>>>>>>> so that the host will be unreachable.
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> I have an internal OVS bridge called ovirtbridge
> >>>>>>>>>>>>>>>>>>>>>>> which
> >>>>>>>>>>>>>>>>>>>>>>> has
> >>>>>>>>>>>>>>>>>>>>>>> a port
> >>>>>>>>>>>>>>>>>>>>>>> with
> >>>>>>>>>>>>>>>>>>>>>>> IP address, but in the host network settings
> >>>>>>>>>>>>>>>>>>>>>>> that port is
> >>>>>>>>>>>>>>>>>>>>>>> not
> >>>>>>>>>>>>>>>>>>>>>>> visible.
> >>>>>>>>>>>>>>>>>>>>>>> It doesn't help to name it ovirtmgmt.
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> The engine is able to communicate with the host
> >>>>>>>>>>>>>>>>>>>>>>> on the ip
> >>>>>>>>>>>>>>>>>>>>>>> it has
> >>>>>>>>>>>>>>>>>>>>>>> been
> >>>>>>>>>>>>>>>>>>>>>>> given, it's just that it believes that it HAS to
> >>>>>>>>>>>>>>>>>>>>>>> have a
> >>>>>>>>>>>>>>>>>>>>>>> ovirtmgmt
> >>>>>>>>>>>>>>>>>>>>>>> network which can't be on OVN.
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> /Sverker
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>> Den 2016-12-28 kl. 10:45, skrev Marcin Mirecki:
> >>>>>>>>>>>>>>>>>>>>>>>> Hi Sverker,
> >>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>> The management network is mandatory on each
> >>>>>>>>>>>>>>>>>>>>>>>> host. It's
> >>>>>>>>>>>>>>>>>>>>>>>> used by
> >>>>>>>>>>>>>>>>>>>>>>>> the
> >>>>>>>>>>>>>>>>>>>>>>>> engine to communicate with the host.
> >>>>>>>>>>>>>>>>>>>>>>>> Looking at your description and the exception
> >>>>>>>>>>>>>>>>>>>>>>>> it looks
> >>>>>>>>>>>>>>>>>>>>>>>> like it
> >>>>>>>>>>>>>>>>>>>>>>>> is
> >>>>>>>>>>>>>>>>>>>>>>>> missing.
> >>>>>>>>>>>>>>>>>>>>>>>> The error is caused by not having any network
> >>>>>>>>>>>>>>>>>>>>>>>> for the
> >>>>>>>>>>>>>>>>>>>>>>>> host
> >>>>>>>>>>>>>>>>>>>>>>>> (network list retrieved in
> >>>>>>>>>>>>>>>>>>>>>>>> InterfaceDaoImpl.getHostNetworksByCluster -
> >>>>>>>>>>>>>>>>>>>>>>>> which
> >>>>>>>>>>>>>>>>>>>>>>>> gets all the networks on nics for a host from
> >>>>>>>>>>>>>>>>>>>>>>>> vds_interface
> >>>>>>>>>>>>>>>>>>>>>>>> table in the
> >>>>>>>>>>>>>>>>>>>>>>>> DB).
> >>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>> Could you maybe create a virtual nic connected to
> >>>>>>>>>>>>>>>>>>>>>>>> ovsbridge0 (as
> >>>>>>>>>>>>>>>>>>>>>>>> I
> >>>>>>>>>>>>>>>>>>>>>>>> understand you
> >>>>>>>>>>>>>>>>>>>>>>>> have no physical nic available) and use this
> >>>>>>>>>>>>>>>>>>>>>>>> for the
> >>>>>>>>>>>>>>>>>>>>>>>> management
> >>>>>>>>>>>>>>>>>>>>>>>> network?
> >>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> I then create a bridge for use with ovirt, with a
> >>>>>>>>>>>>>>>>>>>>>>>>> private
> >>>>>>>>>>>>>>>>>>>>>>>>> address.
> >>>>>>>>>>>>>>>>>>>>>>>> I'm not quite sure I understand. Is this yet
> >>>>>>>>>>>>>>>>>>>>>>>> another
> >>>>>>>>>>>>>>>>>>>>>>>> bridge
> >>>>>>>>>>>>>>>>>>>>>>>> connected to
> >>>>>>>>>>>>>>>>>>>>>>>> ovsbridge0?
> >>>>>>>>>>>>>>>>>>>>>>>> You could also attach the vnic for the management
> >>>>>>>>>>>>>>>>>>>>>>>> network
> >>>>>>>>>>>>>>>>>>>>>>>> here
> >>>>>>>>>>>>>>>>>>>>>>>> if need
> >>>>>>>>>>>>>>>>>>>>>>>> be.
> >>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>> Please keep in mind that OVN has no use in
> >>>>>>>>>>>>>>>>>>>>>>>> setting up
> >>>>>>>>>>>>>>>>>>>>>>>> the
> >>>>>>>>>>>>>>>>>>>>>>>> management
> >>>>>>>>>>>>>>>>>>>>>>>> network.
> >>>>>>>>>>>>>>>>>>>>>>>> The OVN provider can only handle external
> >>>>>>>>>>>>>>>>>>>>>>>> networks,
> >>>>>>>>>>>>>>>>>>>>>>>> which
> >>>>>>>>>>>>>>>>>>>>>>>> can
> >>>>>>>>>>>>>>>>>>>>>>>> not be used
> >>>>>>>>>>>>>>>>>>>>>>>> for a
> >>>>>>>>>>>>>>>>>>>>>>>> management network.
> >>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>> Marcin
> >>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>> ----- Original Message -----
> >>>>>>>>>>>>>>>>>>>>>>>>> From: "Sverker
> >>>>>>>>>>>>>>>>>>>>>>>>> Abrahamsson"<sver...@abrahamsson.com>
> >>>>>>>>>>>>>>>>>>>>>>>>> To:users@ovirt.org
> >>>>>>>>>>>>>>>>>>>>>>>>> Sent: Wednesday, December 28, 2016 12:39:59 AM
> >>>>>>>>>>>>>>>>>>>>>>>>> Subject: [ovirt-users] Issue with OVN/OVS and
> >>>>>>>>>>>>>>>>>>>>>>>>> mandatory
> >>>>>>>>>>>>>>>>>>>>>>>>> ovirtmgmt
> >>>>>>>>>>>>>>>>>>>>>>>>> network
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> Hi
> >>>>>>>>>>>>>>>>>>>>>>>>> For long time I've been looking for proper
> >>>>>>>>>>>>>>>>>>>>>>>>> support in
> >>>>>>>>>>>>>>>>>>>>>>>>> ovirt for
> >>>>>>>>>>>>>>>>>>>>>>>>> Open
> >>>>>>>>>>>>>>>>>>>>>>>>> vSwitch
> >>>>>>>>>>>>>>>>>>>>>>>>> so I'm happy that it is moving in the right
> >>>>>>>>>>>>>>>>>>>>>>>>> direction.
> >>>>>>>>>>>>>>>>>>>>>>>>> However,
> >>>>>>>>>>>>>>>>>>>>>>>>> there
> >>>>>>>>>>>>>>>>>>>>>>>>> seems
> >>>>>>>>>>>>>>>>>>>>>>>>> to still be a dependency on a ovirtmgmt bridge
> >>>>>>>>>>>>>>>>>>>>>>>>> and I'm
> >>>>>>>>>>>>>>>>>>>>>>>>> unable
> >>>>>>>>>>>>>>>>>>>>>>>>> to move
> >>>>>>>>>>>>>>>>>>>>>>>>> that
> >>>>>>>>>>>>>>>>>>>>>>>>> to the OVN provider.
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> The hosting center where I rent hw instances
> >>>>>>>>>>>>>>>>>>>>>>>>> has a bit
> >>>>>>>>>>>>>>>>>>>>>>>>> special
> >>>>>>>>>>>>>>>>>>>>>>>>> network
> >>>>>>>>>>>>>>>>>>>>>>>>> setup,
> >>>>>>>>>>>>>>>>>>>>>>>>> so I have one physical network port with a /32
> >>>>>>>>>>>>>>>>>>>>>>>>> netmask
> >>>>>>>>>>>>>>>>>>>>>>>>> and
> >>>>>>>>>>>>>>>>>>>>>>>>> point-to-point
> >>>>>>>>>>>>>>>>>>>>>>>>> config to router. The physical port I connect
> >>>>>>>>>>>>>>>>>>>>>>>>> to a ovs
> >>>>>>>>>>>>>>>>>>>>>>>>> bridge
> >>>>>>>>>>>>>>>>>>>>>>>>> which has
> >>>>>>>>>>>>>>>>>>>>>>>>> the
> >>>>>>>>>>>>>>>>>>>>>>>>> public ip. Since ovirt always messes up the
> >>>>>>>>>>>>>>>>>>>>>>>>> network
> >>>>>>>>>>>>>>>>>>>>>>>>> config when
> >>>>>>>>>>>>>>>>>>>>>>>>> I've
> >>>>>>>>>>>>>>>>>>>>>>>>> tried
> >>>>>>>>>>>>>>>>>>>>>>>>> to let it have access to the network config
> >>>>>>>>>>>>>>>>>>>>>>>>> for the
> >>>>>>>>>>>>>>>>>>>>>>>>> physical
> >>>>>>>>>>>>>>>>>>>>>>>>> port, I've
> >>>>>>>>>>>>>>>>>>>>>>>>> set
> >>>>>>>>>>>>>>>>>>>>>>>>> eht0 and ovsbridge0 as hidden in vdsm.conf.
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> I then create a bridge for use with ovirt, with a
> >>>>>>>>>>>>>>>>>>>>>>>>> private
> >>>>>>>>>>>>>>>>>>>>>>>>> address. With
> >>>>>>>>>>>>>>>>>>>>>>>>> the
> >>>>>>>>>>>>>>>>>>>>>>>>> OVN provider I am now able to import these
> >>>>>>>>>>>>>>>>>>>>>>>>> into the
> >>>>>>>>>>>>>>>>>>>>>>>>> engine and
> >>>>>>>>>>>>>>>>>>>>>>>>> it looks
> >>>>>>>>>>>>>>>>>>>>>>>>> good. When creating a VM I can select that it
> >>>>>>>>>>>>>>>>>>>>>>>>> will have
> >>>>>>>>>>>>>>>>>>>>>>>>> a
> >>>>>>>>>>>>>>>>>>>>>>>>> vNic
> >>>>>>>>>>>>>>>>>>>>>>>>> on my OVS
> >>>>>>>>>>>>>>>>>>>>>>>>> bridge.
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> However, I can't start the VM as an exception
> >>>>>>>>>>>>>>>>>>>>>>>>> is thrown
> >>>>>>>>>>>>>>>>>>>>>>>>> in the
> >>>>>>>>>>>>>>>>>>>>>>>>> log:
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> 2016-12-28 00:13:33,350 ERROR
> >>>>>>>>>>>>>>>>>>>>>>>>> [org.ovirt.engine.core.bll.RunVmCommand]
> >>>>>>>>>>>>>>>>>>>>>>>>> (default task-5) [3c882d53] Error during
> >>>>>>>>>>>>>>>>>>>>>>>>> ValidateFailure.:
> >>>>>>>>>>>>>>>>>>>>>>>>> java.lang.NullPointerException
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.scheduling.policyunits.NetworkPolicyUnit.validateRequiredNetworksAvailable(NetworkPolicyUnit.java:140)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.scheduling.policyunits.NetworkPolicyUnit.filter(NetworkPolicyUnit.java:69)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.scheduling.SchedulingManager.runInternalFilters(SchedulingManager.java:597)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.scheduling.SchedulingManager.runFilters(SchedulingManager.java:564)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.scheduling.SchedulingManager.canSchedule(SchedulingManager.java:494)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.validator.RunVmValidator.canRunVm(RunVmValidator.java:133)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.RunVmCommand.validate(RunVmCommand.java:940)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.CommandBase.internalValidate(CommandBase.java:886)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.CommandBase.validateOnly(CommandBase.java:366)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner.canRunActions(PrevalidatingMultipleActionsRunner.java:113)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner.invokeCommands(PrevalidatingMultipleActionsRunner.java:99)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.PrevalidatingMultipleActionsRunner.execute(PrevalidatingMultipleActionsRunner.java:76)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.Backend.runMultipleActionsImpl(Backend.java:613)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>> at
> >>>>>>>>>>>>>>>>>>>>>>>>> org.ovirt.engine.core.bll.Backend.runMultipleActions(Backend.java:583)
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> [bll.jar:]
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> Looking at that section of code where the
> >>>>>>>>>>>>>>>>>>>>>>>>> exception is
> >>>>>>>>>>>>>>>>>>>>>>>>> thrown,
> >>>>>>>>>>>>>>>>>>>>>>>>> I see
> >>>>>>>>>>>>>>>>>>>>>>>>> that
> >>>>>>>>>>>>>>>>>>>>>>>>> it
> >>>>>>>>>>>>>>>>>>>>>>>>> iterates over host networks to find required
> >>>>>>>>>>>>>>>>>>>>>>>>> networks,
> >>>>>>>>>>>>>>>>>>>>>>>>> which I
> >>>>>>>>>>>>>>>>>>>>>>>>> assume is
> >>>>>>>>>>>>>>>>>>>>>>>>> ovirtmgmt. In the host network setup dialog I
> >>>>>>>>>>>>>>>>>>>>>>>>> don't see
> >>>>>>>>>>>>>>>>>>>>>>>>> any
> >>>>>>>>>>>>>>>>>>>>>>>>> networks at
> >>>>>>>>>>>>>>>>>>>>>>>>> all
> >>>>>>>>>>>>>>>>>>>>>>>>> but it lists ovirtmgmt as required. It also
> >>>>>>>>>>>>>>>>>>>>>>>>> list the
> >>>>>>>>>>>>>>>>>>>>>>>>> OVN
> >>>>>>>>>>>>>>>>>>>>>>>>> networks but
> >>>>>>>>>>>>>>>>>>>>>>>>> these
> >>>>>>>>>>>>>>>>>>>>>>>>> can't be statically assigned as they are added
> >>>>>>>>>>>>>>>>>>>>>>>>> dynamically when
> >>>>>>>>>>>>>>>>>>>>>>>>> needed,
> >>>>>>>>>>>>>>>>>>>>>>>>> which is fine.
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> I believe that I either need to remove ovirtmgmt
> >>>>>>>>>>>>>>>>>>>>>>>>> network
> >>>>>>>>>>>>>>>>>>>>>>>>> or
> >>>>>>>>>>>>>>>>>>>>>>>>> configure
> >>>>>>>>>>>>>>>>>>>>>>>>> that
> >>>>>>>>>>>>>>>>>>>>>>>>> it
> >>>>>>>>>>>>>>>>>>>>>>>>> is provided by the OVN provider, but neither is
> >>>>>>>>>>>>>>>>>>>>>>>>> possible.
> >>>>>>>>>>>>>>>>>>>>>>>>> Preferably it
> >>>>>>>>>>>>>>>>>>>>>>>>> shouldn't be hardcoded which network is
> >>>>>>>>>>>>>>>>>>>>>>>>> management and
> >>>>>>>>>>>>>>>>>>>>>>>>> mandatory but be
> >>>>>>>>>>>>>>>>>>>>>>>>> possible to configure.
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>> /Sverker
> >>>>>>>>>>>>>>>>>>>>>>>>> Den 2016-12-27 kl. 17:10, skrev Marcin Mirecki:
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>>>>>>>>>>>> Users mailing list
> >>>>>>>>>>>>>>>>>>>>>> Users@ovirt.org
> >>>>>>>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
> >>>>>>>>>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>>>>>>>>>> Users mailing list
> >>>>>>>>>>>>>>>>>>>> Users@ovirt.org
> >>>>>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
> >>>>>>>>>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>>>>>>>>> Users mailing list
> >>>>>>>>>>>>>>>>>>> Users@ovirt.org
> >>>>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
> >>>>>>>>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>>>>>>>> Users mailing list
> >>>>>>>>>>>>>>>>>> Users@ovirt.org
> >>>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
> >>>>>>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>>>>>> Users mailing list
> >>>>>>>>>>>>>>>> Users@ovirt.org
> >>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
> >>>>>>>>>>>>>>>>
> >>>>>>>>>>> _______________________________________________
> >>>>>>>>>>> Users mailing list
> >>>>>>>>>>> Users@ovirt.org
> >>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
> >>>>>>>>>> _______________________________________________
> >>>>>>>>>> Users mailing list
> >>>>>>>>>> Users@ovirt.org
> >>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
> >>>>>>>>> _______________________________________________
> >>>>>>>>> Users mailing list
> >>>>>>>>> Users@ovirt.org
> >>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
> >>>>>>
> >>>>
> >>
> >> _______________________________________________
> >> Users mailing list
> >> Users@ovirt.org
> >> http://lists.ovirt.org/mailman/listinfo/users
> >
> > _______________________________________________
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> 
> 
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Reply via email to