On Wed, Mar 15, 2017 at 12:17 PM, Manuel Luis Aznar < manuel.luis.az...@gmail.com> wrote:
> Hello Simone, > > The quoted lines on your last message are on lines 1238-1245 on the > attached log ovirt-hosted-engine-setup file. > > That file is the first hosted-engine setup. But this log file is not the > result of a host-engine-setup file. I start with the installation and while > I was answering the question I was looking to this log file for errors and > when I found this errors I stopped and done this: > > FAILED: conflicting vdsm and libvirt-qemu tls configuration. > vdsm.conf with ssl=True requires the following changes: > libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1 > qemu.conf: spice_tls=1. > > Previously to this installation I have done several installations without > revising this log file and always getting failed installations. > > Please its important to note that: > > The currently setup which we are talking about was using repo > "ovirt-release41-pre.rpm". > After correcting that two files I do the installation and in the end it was > completed successfully. > > When I have some time I will try to install again using the realease repo " > ovirt-release41.rpm" > > If you have any explanation, question or remark, please go ahead... > >From the attached logs it seams that you voluntary interrupted the setup from keyboard here: 2017-03-07 11:23:17 DEBUG otopi.plugins.otopi.dialog.human dialog.__logString:204 DIALOG:SEND iptables was detected on your computer, do you wish setup to configure it? (Yes, No)[Yes]: 2017-03-07 12:06:15 DEBUG otopi.context context._executeMethod:142 method exception Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, in _executeMethod method['method']() File "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-setup/network/firewall_manager.py", line 157, in _customization default=_('Yes'), File "/usr/share/otopi/plugins/otopi/dialog/human.py", line 177, in queryString value = self._readline(hidden=hidden) File "/usr/lib/python2.7/site-packages/otopi/dialog.py", line 246, in _readline value = self.__input.readline() File "/usr/lib/python2.7/site-packages/otopi/main.py", line 53, in _signal raise RuntimeError("SIG%s" % signum) RuntimeError: SIG2 > > I will report back. > Thanks for all in advance > Manuel > > 2017-03-13 17:29 GMT+00:00 Simone Tiraboschi <stira...@redhat.com>: > >> >> >> On Mon, Mar 13, 2017 at 4:08 PM, Manuel Luis Aznar < >> manuel.luis.az...@gmail.com> wrote: >> >>> Hello to all there again, >>> >>> I was having some troubles while installing ovirt Hosted Engine, I took >>> some look at the hosted engine setup logs while I was running the >>> hosted-engine --deploy and I found the following in the ovirt hosted engine >>> setup logs: >>> >>> lvm requires configuration >>> libvirt is not configured for vdsm yet >>> FAILED: conflicting vdsm and libvirt-qemu tls configuration. >>> vdsm.conf with ssl=True requires the following changes: >>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1 >>> qemu.conf: spice_tls=1. >>> >>> >> hosted-engine setup is already running vdsm-tool configure --force so it >> should configure libvirt and qemu for you, not sure why it failed. >> Could you please attach the logs from the failed hosted-engine-setup run? >> >> >>> When I saw this I stopped the setup and edited this two files (vdsm.conf >>> and qemu.conf) set the stated configurations and run the deploy again. All >>> was fine and I dont have any trouble the installation finished >>> successfully. This was using ovirt-release41-pre.rpm repo. >>> >>> I will be trying the same installation with ovirt-release41.rpm (when I >>> have time) and I will report what happened. >>> >>> Thanks for all >>> Manuel Luis Aznar >>> >>> >>> >>> 2017-03-06 1:31 GMT+00:00 Manuel Luis Aznar <manuel.luis.az...@gmail.com >>> >: >>> >>>> Hey there, >>>> >>>> I have been loking around, of course as of now the following I am going >>>> to say I suppose is not anything new to you: >>>> >>>> This is the status of libvirtd: >>>> >>>> â libvirtd.service - Virtualization daemon >>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; >>>> vendor preset: enabled) >>>> Drop-In: /etc/systemd/system/libvirtd.service.d >>>> ââunlimited-core.conf >>>> Active: active (running) since lun 2017-03-06 01:25:05 WET; 1min 37s >>>> ago >>>> Docs: man:libvirtd(8) >>>> http://libvirt.org >>>> Main PID: 24350 (libvirtd) >>>> CGroup: /system.slice/libvirtd.service >>>> ââ24350 /usr/sbin/libvirtd --listen >>>> >>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting Virtualization >>>> daemon... >>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Started Virtualization >>>> daemon. >>>> >>>> >>>> After looking at the state I fire up the VM engine with the command >>>> "hosted-engine --vm-start" and I got the following: >>>> >>>> >>>> VM exists and is down, destroying it >>>> Machine destroyed >>>> >>>> ed786811-0321-431e-be4b-2d03764c1b02 >>>> Status = WaitForLaunch >>>> nicModel = rtl8139,pv >>>> statusTime = 4374100040 <(437)%20410-0040> >>>> emulatedMachine = pc >>>> pid = 0 >>>> vmName = HostedEngine >>>> devices = [{'index': '2', 'iface': 'ide', 'specParams': {}, >>>> 'readonly': 'true', 'deviceId': '506df4eb-e783-4451-a8a6-993fa4dbb381', >>>> 'address': {'bus': '1', 'controller': '0', 'type': 'drive', 'target': '0', >>>> 'unit': '0'}, 'device': 'cdrom', 'shared': 'false', 'path': '', 'type': >>>> 'disk'}, {'index': '0', 'iface': 'virtio', 'format': 'raw', 'bootOrder': >>>> '1', 'poolID': '00000000-0000-0000-0000-000000000000', 'volumeID': >>>> '2bc39472-1a4b-4c7d-8ef9-1212182ad802', 'imageID': >>>> '08288fcf-6b12-4bd1-84d3-259992e7aa6d', 'specParams': {}, 'readonly': >>>> 'false', 'domainID': 'f44afe8d-56f9-4e1e-beee-4daa548dbad8', >>>> 'optional': 'false', 'deviceId': '08288fcf-6b12-4bd1-84d3-259992e7aa6d', >>>> 'address': {'slot': '0x06', 'bus': '0x00', 'domain': '0x0000', 'type': >>>> 'pci', 'function': '0x0'}, 'device': 'disk', 'shared': 'exclusive', >>>> 'propagateErrors': 'off', 'type': 'disk'}, {'device': 'scsi', 'model': >>>> 'virtio-scsi', 'type': 'controller'}, {'nicModel': 'pv', 'macAddr': >>>> '00:16:3e:65:a6:4e', 'linkActive': 'true', 'network': 'ovirtmgmt', >>>> 'specParams': {}, 'deviceId': '84b82c6c-bcca-4983-82d5-8d1e3ab3811a', >>>> 'address': {'slot': '0x03', 'bus': '0x00', 'domain': '0x0000', 'type': >>>> 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface'}, >>>> {'device': 'console', 'specParams': {}, 'type': 'console', 'deviceId': >>>> '6236af73-8dab-4d14-b950-fb4ad01d4420', 'alias': 'console0'}, >>>> {'device': 'vga', 'alias': 'video0', 'type': 'video'}, {'device': 'virtio', >>>> 'specParams': {'source': 'random'}, 'model': 'virtio', 'type': 'rng'}] >>>> guestDiskMapping = {} >>>> vmType = kvm >>>> clientIp = >>>> displaySecurePort = -1 >>>> memSize = 4096 >>>> displayPort = -1 >>>> cpuType = Broadwell >>>> spiceSecureChannels = smain,sdisplay,sinputs,scursor >>>> ,splayback,srecord,ssmartcard,susbredir >>>> smp = 2 >>>> displayIp = 0 >>>> display = vnc >>>> maxVCpus = 6 >>>> >>>> >>>> After that if I look again at the status of libvirtd I obtain: >>>> >>>> >>>> â libvirtd.service - Virtualization daemon >>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; >>>> vendor preset: enabled) >>>> Drop-In: /etc/systemd/system/libvirtd.service.d >>>> ââunlimited-core.conf >>>> Active: active (running) since lun 2017-03-06 01:25:05 WET; 5min ago >>>> Docs: man:libvirtd(8) >>>> http://libvirt.org >>>> Main PID: 24350 (libvirtd) >>>> CGroup: /system.slice/libvirtd.service >>>> ââ24350 /usr/sbin/libvirtd --listen >>>> >>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting Virtualization >>>> daemon... >>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Started Virtualization >>>> daemon. >>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: libvirt version: >>>> 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem <http://bugs.centos.org>, >>>> 2017-03-03-02:09:45, c1bm.rdu2.centos.org) >>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: hostname: >>>> host1.bajada.es >>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: Falló al conectar >>>> con el socket de monitor: No existe el proceso >>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: internal error: >>>> process exited while connecting to monitor: Could not access KVM kernel >>>> module: Permission denied >>>> failed to initialize >>>> KVM: Permission denied >>>> >>>> >>>> So the libvirtd is the problem, as i said this is nothing new to you of >>>> course... >>>> >>>> Thanks again for any help >>>> Manuel >>>> >>>> >>>> 2017-03-05 18:51 GMT+00:00 Manuel Luis Aznar < >>>> manuel.luis.az...@gmail.com>: >>>> >>>>> Hey there again, >>>>> >>>>> >>>>> Can you check if you have KVM modules loaded? >>>>> >>>>> In order to check that I fire up the following command: "lsmod | >>>>> grep kvm" >>>>> >>>>> Result was: >>>>> >>>>> kvm_intel 170181 0 >>>>> kvm 554609 1 kvm_intel >>>>> irqbypass 13503 1 kvm >>>>> >>>>> >>>>> Also check group owner for "/dev/kvm". I fire this: "ls -la /dev/kvm". >>>>> The result was: >>>>> >>>>> crw-rw-rw-+ 1 root kvm 10, 232 mar 5 03:35 /dev/kvm >>>>> >>>>> >>>>> Also I check if there were some remain packages pending to install for >>>>> kvm and qemu and I got: >>>>> >>>>> yum install \*kvm\* >>>>> >>>>> The result is, that the system need to install the following: >>>>> >>>>> Instalando: >>>>> centos-release-qemu-ev noarch 1.0-1.el7 >>>>> extras 11 k >>>>> qemu-guest-agent x86_64 >>>>> 10:2.5.0-3.el7 base >>>>> 133 k >>>>> qemu-kvm-ev-debuginfo x86_64 >>>>> 10:2.6.0-28.el7_3.3.1 ovirt-4.0 >>>>> 12 M >>>>> vdsm-hook-faqemu noarch >>>>> 4.18.21-1.el7.centos ovirt-4.0 >>>>> 15 k >>>>> vdsm-hook-qemucmdline noarch >>>>> 4.18.21-1.el7.centos ovirt-4.0 >>>>> 11 k >>>>> Instalando para las dependencias: >>>>> centos-release-virt-common noarch 1-1.el7.centos >>>>> extras 4.5 k >>>>> >>>>> >>>>> Checking libvirtd service status I got: >>>>> >>>>> libvirtd.service - Virtualization daemon >>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; >>>>> vendor preset: enabled) >>>>> Drop-In: /etc/systemd/system/libvirtd.service.d >>>>> ââunlimited-core.conf >>>>> Active: active (running) since dom 2017-03-05 15:56:11 WET; 2h >>>>> 51min ago >>>>> Docs: man:libvirtd(8) >>>>> http://libvirt.org >>>>> Main PID: 19415 (libvirtd) >>>>> CGroup: /system.slice/libvirtd.service >>>>> 19415 /usr/sbin/libvirtd --listen >>>>> >>>>> mar 05 15:56:10 host1.bajada.es systemd[1]: Starting Virtualization >>>>> daemon... >>>>> mar 05 15:56:11 host1.bajada.es systemd[1]: Started Virtualization >>>>> daemon. >>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: libvirt version: >>>>> 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem <http://bugs.centos.org>, >>>>> 2017-03-03-02:09:45, c1bm.rdu2.centos.org) >>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: hostname: >>>>> host1.bajada.es >>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: Failed to connect to >>>>> the socket monitor: process does not exits >>>>> >>>>> (Fallo al conectar con el socket de monitor: No existe el proceso) >>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: internal error: >>>>> process exited while connecting to monitor: Could not access KVM kernel >>>>> module: Permission denied >>>>> failed to initialize >>>>> KVM: Permission denied >>>>> >>>>> >>>>> Thanks for all in advance >>>>> I will be waiting for you. Any help appreciated >>>>> Manuel >>>>> >>>>> 2017-03-05 17:33 GMT+00:00 Artyom Lukianov <aluki...@redhat.com>: >>>>> >>>>>> I found this one under the vdsm log: >>>>>> libvirtError: internal error: process exited while connecting to >>>>>> monitor: Could not access KVM kernel module: Permission denied >>>>>> failed to initialize KVM: Permission denied >>>>>> Thread-70::INFO::2017-03-05 >>>>>> 16:00:04,325::vm::1330::virt.vm::(setDownStatus) >>>>>> vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Changed state to Down: >>>>>> internal error: process exited while connecting to monitor: Could not >>>>>> access KVM kernel module: Permission denied >>>>>> failed to initialize KVM: Permission denied (code=1) >>>>>> Thread-70::INFO::2017-03-05 >>>>>> 16:00:04,325::guestagent::430::virt.vm::(stop) >>>>>> vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Stopping connection >>>>>> Thread-70::DEBUG::2017-03-05 >>>>>> 16:00:04,325::vmchannels::238::vds::(unregister) >>>>>> Delete fileno 52 from listener. >>>>>> Thread-70::DEBUG::2017-03-05 >>>>>> 16:00:04,325::vmchannels::66::vds::(_unregister_fd) >>>>>> Failed to unregister FD from epoll (ENOENT): 52 >>>>>> Thread-70::DEBUG::2017-03-05 >>>>>> 16:00:04,326::__init__::209::jsonrpc.Notification::(emit) >>>>>> Sending event {"params": {"ed786811-0321-431e-be4b-2d03764c1b02": >>>>>> {"status": "Down", "exitReason": 1, "exitMessage": "internal error: >>>>>> process >>>>>> exited while connecting to monitor: Could not access KVM kernel module: >>>>>> Permission denied\nfailed to initialize KVM: Permission denied", >>>>>> "exitCode": 1}, "notify_time": 4339924730}, "jsonrpc": "2.0", "method": >>>>>> "|virt|VM_status|ed786811-0321-431e-be4b-2d03764c1b02"} >>>>>> >>>>>> Can you check if you have KVM modules loaded? Also, check group owner >>>>>> for "/dev/kvm". >>>>>> Best Regards >>>>>> >>>>>> >>>>>> On Sat, Mar 4, 2017 at 4:24 PM, Manuel Luis Aznar < >>>>>> manuel.luis.az...@gmail.com> wrote: >>>>>> >>>>>>> Hello there again, >>>>>>> >>>>>>> The error on the first email was using the repo ovirt-release41.rpm ( >>>>>>> http://resources.ovirt.org/pub/yum-repo/ovirt-release41.rpm), so as >>>>>>> I were getting the same error again and again I am currently trying with >>>>>>> ovirt-release41-snapshot.rpm (http://resources.ovirt.org/pu >>>>>>> b/yum-repo/ovirt-release41-snapshot.rpm) and the result is nearly >>>>>>> the same. >>>>>>> >>>>>>> After creating the VM on the installation I got the same error with >>>>>>> the command "systemctl status vdsmd": >>>>>>> >>>>>>> mar 04 14:10:19 host1.bajada.es vdsm[20443]: vdsm root ERROR failed >>>>>>> to retrieve Hosted Engine HA info >>>>>>> >>>>>>> Traceback (most recent call last): >>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", >>>>>>> line 231, in _getHaInfo >>>>>>> stats = instance.get_all_stats() >>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>> ges/ovirt_hosted_engine_ha/client/client.py", line 102, in >>>>>>> get_all_stats >>>>>>> with broker.connection(self._retries, self._wait): >>>>>>> File "/usr/lib64/python2.7/contextlib.py", line 17, in >>>>>>> __enter__ >>>>>>> return self.gen.next() >>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, in >>>>>>> connection >>>>>>> self.connect(retries, wait) >>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, in connect >>>>>>> raise BrokerConnectionError(error_msg) >>>>>>> BrokerConnectionError: Failed to connect to broker, the >>>>>>> number of errors has exceeded the limit (1) >>>>>>> >>>>>>> mar 04 14:10:34 host1.bajada.es vdsm[20443]: vdsm >>>>>>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to >>>>>>> connect to broker, the number of errors has exceeded the limit (1) >>>>>>> >>>>>>> I have noticed that the ovirt-ha-agent and ovirt-ha-broker services >>>>>>> was not running. I guess if this have something to do with the error in >>>>>>> vsmd service log. >>>>>>> >>>>>>> But in this case the ovirt-hosted-engine-installation prints the >>>>>>> vnc connection and I can connect to the engine VM. >>>>>>> >>>>>>> Thanks for all in advance >>>>>>> Any help would be appreciated >>>>>>> Manuel Luis Aznar >>>>>>> >>>>>>> 2017-03-03 21:48 GMT+00:00 Manuel Luis Aznar < >>>>>>> manuel.luis.az...@gmail.com>: >>>>>>> >>>>>>>> Hello there, >>>>>>>> >>>>>>>> I am having some trouble when deploying an oVirt 4.1 hosted engine >>>>>>>> installation. >>>>>>>> >>>>>>>> When I m just to end the installation and the hosted engine setup >>>>>>>> script is about to start the Vm engine (appliance) it fails saying >>>>>>>> "The VM >>>>>>>> is not powring up". >>>>>>>> >>>>>>>> If I double check the service vdsmd i get this error all the time: >>>>>>>> >>>>>>>> vdsm root ERROR failed to retrieve Hosted Engine HA info >>>>>>>> Traceback (most recent call last): >>>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", >>>>>>>> line 231, in _getHaInfo >>>>>>>> stats = instance.get_all_stats() >>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>> ges/ovirt_hosted_engine_ha/client/client.py", line 102, in >>>>>>>> get_all_stats >>>>>>>> with broker.connection(self._retries, self._wait): >>>>>>>> File "/usr/lib64/python2.7/contextlib.py", line 17, in >>>>>>>> __enter__ >>>>>>>> return self.gen.next() >>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, in >>>>>>>> connection >>>>>>>> self.connect(retries, wait) >>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, in connect >>>>>>>> raise BrokerConnectionError(error_msg) >>>>>>>> BrokerConnectionError: Failed to connect to broker, the number of >>>>>>>> errors has exceeded the limit (1) >>>>>>>> >>>>>>>> Did anyone have experimented the same problem?¿? Any hint on How to >>>>>>>> solved it?¿? I have tried several times with clean installations and >>>>>>>> always >>>>>>>> getting the same... >>>>>>>> >>>>>>>> The host where I am trying to do the installation have CentOS 7... >>>>>>>> >>>>>>>> >>>>>>>> Thanks for all in advance >>>>>>>> Will be waiting for any hint to see what I am doing wrong... >>>>>>>> Manuel Luis Aznar >>>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Users mailing list >>>>>>> Users@ovirt.org >>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >>> _______________________________________________ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users