Michael, The tooltip says: "host nework's configurations differ from DC"
> It is possible that the out-of-sync is the reason for the network issue. > It's a real problem that your ifcfg-ovirtmgmt file was missing after > upgrade, could it be that it wasn't persisted and saved on the host before > running the upgrade? I wish I had an answer for this. It is possible? The firs line is commented and says: "# Generated by VDSM version 4.17.23.2-0.el7.centos" - I tried refreshing capabilites, no change. - It is possible to check or uncheck it. - this is not an option. I mentioned in my first email that this is a single host that is used for development only. That is why I ask if there is a why to perform the networksync via CLI, or perhaps manually? -Alex On Tue, May 16, 2017 at 11:30 PM, Michael Burman <[email protected]> wrote: > Alex, > > Please tell what is the tooltip saying. What is the reason for networks > being out-of-sync? > > It is possible that the out-of-sync is the reason for the network issue. > It's a real problem that your ifcfg-ovirtmgmt file was missing after > upgrade, could it be that it wasn't persisted and saved on the host before > running the upgrade? > > - Can you please try to press the 'refresh caps' button? > - Does the 'save Network Configuration' button grayed out or it's possible > to press it? > - Another option is to migrate the hosted-engine VM to another host in the > cluster and then sync the network on the host.(as you can't sync a network > being used by a running VM). > > Regards, > > > > > > On Wed, May 17, 2017 at 8:42 AM, Alex R <[email protected]> wrote: > >> Hi Michael, thanks for the suggestion. When I use the GUI I get the error >> >> "Error while executing action HostSetupNetworks: Network is currently >> being used" >> >> The network is in use by the engine, that is why I asked if there is a >> was to sync via the CLI. >> >> This problem happened after I did the latest upgraded and the host had >> lost the /etc/sysconfig/netowrk-scripts/ifcfg-ovirtmgmt file. So I >> recreated the file and I thought alll was well except I cannot open a from >> outside of the host and engine network (10.3.1.0/24). >> >> source 10.3.5.0/24 cannot open console on at the destination 10.3.1.0/24. >> The error I get is: >> >> "Unable to connect to the graphic server /tmp/mozilla_digger0/console.vv >> could not connect to 10.3.1.7:Socket I/O timed out" >> >> I have already verified that the iptables rules are open and I have >> verified that ASA that is between the network is not blocking by doing both >> a packet-tracer and reviewing the logs. >> >> I think the problem is this "out-of-sync" network issue? >> >> -Alex >> >> >> On Tue, May 16, 2017 at 10:12 PM, Michael Burman <[email protected]> >> wrote: >> >>> Hello Alex, >>> >>> - Have you tried to sync it using the 'Sync All Networks' button in the >>> UI? >>> It's located under 'Hosts' main tab > select the host > 'Network >>> Interfaces' sub tab > 'Sync All Networks' button. >>> >>> - Can you please go to the 'Setup Host Networks' dialog(located under >>> the same path^^) and hoover on top of ovirtmgmt network? a tooltip should >>> pop-up and it should let you know what is the reason that the network is >>> being out-of-sync. Engine probably complaining about a difference between >>> the configuration on the host and the DC. >>> - How did you end up with this situation? what happened before the >>> network become out-of-sync? did it happened after the hosted-engine deploy >>> was done? >>> >>> Best regards, >>> >>> On Wed, May 17, 2017 at 12:10 AM, Alex R <[email protected]> wrote: >>> >>>> No one has suggestions on how I can sync the ovirtmgmt network? Is >>>> more information needed? >>>> >>>> >>>> On May 12, 2017 10:43 AM, "Alex R" <[email protected]> wrote: >>>> >>>>> Hi, >>>>> >>>>> I upgraded to the latest version ([email protected]) a few weeks ago >>>>> and ever since then I cannot open a console unless I am on the local >>>>> network (10.3.1.0/24). I think it is related to the Ovirtmgmt >>>>> interface being "out-of-sync". >>>>> >>>>> If I try to fix it in the gui, I get an error: >>>>> >>>>> "Error while executing action HostSetupNetworks: Network is currently >>>>> being used" >>>>> >>>>> This is because the hosted engine in on the ovirtmgmt network. >>>>> >>>>> Is there a way I can fix this via cli? This is a single host with a >>>>> hosted engine. I use it for development only. >>>>> >>>>> Thank you. >>>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> [email protected] >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> >>> >>> -- >>> Michael Burman >>> RedHat Israel, RHV-M Network QE >>> >>> Mobile: 054-5355725 >>> IRC: mburman >>> >> >> > > > -- > Michael Burman > RedHat Israel, RHV-M Network QE > > Mobile: 054-5355725 > IRC: mburman >
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
