Hi Lev.

I am create new virtual host, and run ping from internet.

Ping results 70% packet loss.

But, if i am running ping from virtual host to somebody host in the internet and at the same time, i am pinging this virtual host from internet.

then ping results 0% packet loss or 10% packet loss.


28.05.2017 13:34, Lev Veyde пишет:
Hi Alex,

That is quite strange...

Does this happen on both hosts - have you tried to migrate the VM to the second host and see if the issue still remains?

Thanks in advance,


On Fri, May 26, 2017 at 3:02 PM, Герасимов Александр <[email protected] <mailto:[email protected]>> wrote:

    Hi Lev.


    On one of the VMs you only see 1 NIC instead of the 2?

    NO. both VM's sees two NIC, but on first VM ping with no error,
    and second VM ping with 75% error.

    OS version on hosts [root@node01 ~]# cat /etc/redhat-release
    CentOS Linux release 7.3.1611 (Core)

    OS veriosion on VM's [root@node03 ~]# cat /etc/redhat-release
    CentOS Linux release 7.3.1611 (Core)



    *first VM*

    00:03.0 Ethernet controller: Red Hat, Inc Virtio network device

    00:09.0 Ethernet controller: Red Hat, Inc Virtio network device

    [root@node03 ~]# ip l
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state
    UNKNOWN mode DEFAULT qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
    pfifo_fast state UP mode DEFAULT qlen 1000
        link/ether 00:1a:4a:16:01:51 brd ff:ff:ff:ff:ff:ff
    3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
    pfifo_fast state UP mode DEFAULT qlen 1000
        link/ether 00:1a:4a:16:01:55 brd ff:ff:ff:ff:ff:ff

    *second VM*

    00:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
    RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 20)  - but i
    tested all version of NIC and no effect

    00:0a.0 Ethernet controller: Red Hat, Inc Virtio network device

    [root@node04 ~]# ip link
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state
    UNKNOWN mode DEFAULT qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
    pfifo_fast state UP mode DEFAULT qlen 1000
        link/ether 00:1a:4a:16:01:53 brd ff:ff:ff:ff:ff:ff
    3: ens3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
    pfifo_fast state UP mode DEFAULT qlen 1000
        link/ether 00:1a:4a:16:01:52 brd ff:ff:ff:ff:ff:ff

    In logs no messages only like this :

    May 26 15:01:01 node04 systemd: Started Session 67263 of user root.
    May 26 15:01:01 node04 systemd: Starting Session 67263 of user root.
    May 26 15:01:01 node04 systemd: Created slice user-600.slice.
    May 26 15:01:01 node04 systemd: Starting user-600.slice.
    May 26 15:01:01 node04 systemd: Started Session 67262 of user bitrix.
    May 26 15:01:01 node04 systemd: Starting Session 67262 of user bitrix.
    May 26 15:01:01 node04 systemd: Removed slice user-600.slice.
    May 26 15:01:01 node04 systemd: Stopping user-600.slice.


    Hi Alexander,

    So if I understand it correctly, you have the following configuration:
    - 2 hosts, each having 2 NICs
    - 2 virtual machines, each have a connection to each one of the NICs
    available on the hosts

    On one of the VMs you only see 1 NIC instead of the 2?

    Are you sure that the VM is properly configured to have 2 NICs?

    What Linux distro and version you're using on the hosts and inside
    the VMs ?

    Can you please send us:
    - the logs from the VM, e.g. /var/log/messages
    - the output of lspci -v
    - the output of ip link

    Thanks in advance,

    2017-05-18 12:19 GMT+03:00 Герасимов Александр <gerasimov.ay at
    eksmo.ru <http://eksmo.ru>>:

    > Hi all.
    >
    > I have to servers with ovirt.
    >
    > And to identical virtual machines.
    >
    > Both servers are identical. But on second virtual server not
    working one
    > network interface. Ping have a problem. I tried to change
    network driver,
    > but has no effect.
    >
    > I don't understand that to do
    >
    >
    > ovirt version and package:
    >
    > rpm -qa|grep ovirt
    >
    ovirt-imageio-proxy-0.4.0-0.201608310602.gita9b573b.el7.centos.noarch
    > ovirt-engine-vmconsole-proxy-helper-4.0.5.5-1.el7.centos.noarch
    > ovirt-engine-restapi-4.0.5.5-1.el7.centos.noarch
    > ovirt-engine-extensions-api-impl-4.0.5.5-1.el7.centos.noarch
    > ovirt-imageio-daemon-0.4.0-1.el7.noarch
    > ovirt-engine-wildfly-10.1.0-1.el7.x86_64
    > ovirt-vmconsole-1.0.4-1.el7.centos.noarch
    > ovirt-engine-cli-3.6.9.2-1.el7.noarch
    > ovirt-engine-websocket-proxy-4.0.5.5-1.el7.centos.noarch
    > ovirt-engine-dashboard-1.0.5-1.el7.centos.noarch
    > ovirt-host-deploy-1.5.3-1.el7.centos.noarch
    > ovirt-engine-wildfly-overlay-10.0.0-1.el7.noarch
    > ovirt-engine-setup-base-4.0.5.5-1.el7.centos.noarch
    > ovirt-engine-dwh-setup-4.0.5-1.el7.centos.noarch
    >
    ovirt-engine-setup-plugin-websocket-proxy-4.0.5.5-1.el7.centos.noarch
    > ovirt-engine-setup-4.0.5.5-1.el7.centos.noarch
    > ovirt-engine-dbscripts-4.0.5.5-1.el7.centos.noarch
    > ovirt-engine-userportal-4.0.5.5-1.el7.centos.noarch
    > ovirt-imageio-common-0.4.0-1.el7.noarch
    > python-ovirt-engine-sdk4-4.0.2-1.el7.centos.x86_64
    > ovirt-vmconsole-host-1.0.4-1.el7.centos.noarch
    > ovirt-engine-dwh-4.0.5-1.el7.centos.noarch
    > ovirt-engine-tools-backup-4.0.5.5-1.el7.centos.noarch
    > ovirt-image-uploader-4.0.1-1.el7.centos.noarch
    > ovirt-engine-setup-plugin-ovirt-engine-4.0.5.5-1.el7.centos.noarch
    > ovirt-engine-tools-4.0.5.5-1.el7.centos.noarch
    > ovirt-engine-4.0.5.5-1.el7.centos.noarch
    > ovirt-release40-4.0.5-2.noarch
    > ovirt-host-deploy-java-1.5.3-1.el7.centos.noarch
    >
    ovirt-engine-setup-plugin-ovirt-engine-common-4.0.5.5-1.el7.centos.noarch
    > ovirt-iso-uploader-4.0.2-1.el7.centos.noarch
    > ovirt-engine-webadmin-portal-4.0.5.5-1.el7.centos.noarch
    > ovirt-setup-lib-1.0.2-1.el7.centos.noarch
    > ovirt-engine-sdk-python-3.6.9.1-1.el7.centos.noarch
    > ovirt-engine-lib-4.0.5.5-1.el7.centos.noarch
    > ovirt-imageio-proxy-setup-0.4.0-0.201608310602.gita9b573b.
    > el7.centos.noarch
    > ovirt-engine-setup-plugin-vmconsole-proxy-helper-4.0.5.
    > 5-1.el7.centos.noarch
    > ovirt-engine-backend-4.0.5.5-1.el7.centos.noarch
    > ovirt-engine-extension-aaa-jdbc-1.1.1-1.el7.noarch
    > ovirt-vmconsole-proxy-1.0.4-1.el7.centos.noarch
    >
    >

-- С уважением, базисный админстратор
    Гераcимов Александр
    тел.+7(495)4116886 <tel:+7%20495%20411-68-86>  доб. 5367


    _______________________________________________
    Users mailing list
    [email protected] <mailto:[email protected]>
    http://lists.ovirt.org/mailman/listinfo/users
    <http://lists.ovirt.org/mailman/listinfo/users>




--

Lev Veyde

Software Engineer, RHCE | RHCVA | MCITP

Red Hat Israel

<https://www.redhat.com>

[email protected] <mailto:[email protected]> | [email protected] <mailto:[email protected]>

<https://red.ht/sig>
TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>

--
С уважением, базисный админстратор
Гераcимов Александр
тел. +7(495)4116886 доб. 5367

_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users

Reply via email to