Thanks - makes sense. I've worked on this a bit more and have pushed a bit further, but from looking through my new log, it looks like the engine is error-ing out because my engine FQDN is cannot be resolved to an IP address.
*The error: * [ ERROR ] Host name is not valid: *engine.example.rocks* did not resolve into an IP address *engine.example.rocks* is the FQDN I supplied when answering the following: Please provide the FQDN you would like to use for the engine appliance. > Note: This will be the FQDN of the engine VM you are now going to launch. > It should not point to the base host or to any other existing machine. > Engine VM FQDN: (leave it empty to skip): *My /etc/hosts file: * 192.168.1.44 host.example.rocks host 192.168.1.45 engine.example.rocks engine I can see why it's erroring, but I'm not sure what I need to do now to get it working. The IP 192.168.1.45 is one I just made up, because the only system I have access to is the one I'm currently using (192.168.1.44) Jon On Thu, Jun 15, 2017 at 12:01 PM, Simone Tiraboschi <[email protected]> wrote: > > > On Thu, Jun 15, 2017 at 4:08 PM, Jon Bornstein < > [email protected]> wrote: > >> My lack of Linux proficiency is going to show here, but.. >> >> I guess I'm a bit confused on how to correctly configure my network >> interface(s) for oVirt. >> >> I currently have two network interfaces: >> >> enp0s25 - >> This is my Ethernet interface, but it is unused. It currently is set to >> DHCP and has no IP address. However, it is the only interface that oVirt >> suggests I use when configuring which nic to set the bridge on. >> >> wlo1 - >> My wireless interface, and IS how i'm connecting to the internet. This >> is the IP address that I was using in my /etc/hosts file. >> >> Is it it not possible have a system that can run oVirt as well as >> maintain an internet connection? >> >> > oVirt by default works in bridge mode. > This means that is going to create a bridge on your hosts and the vnic of > your VMs will be connected to that bridge as well. > > oVirt is composed by a central engine managing physical hosts trough an > agent deployed on each host. > So the engine has to be able to reach the managed hosts, this happens > though what we call management network. > > hosted-engine is special deployment where for ha reasons the oVirt engine > is going to run on a VM hosted on the host that it's managing. > So, wrapping up, with hosted-engine setup you are going to create a VM for > the engine, the engine VM will have a nic on the management network and > this mean that you have a management bridge on your host. > The host has to have an address over the management network in order to > have the engine able to reach your host. > > That's why hosted-engine-setup is checking the address of the interface > you choose for the management network. > > > >> >> On Thu, Jun 15, 2017 at 9:02 AM, Simone Tiraboschi <[email protected]> >> wrote: >> >>> >>> >>> On Thu, Jun 15, 2017 at 2:55 PM, Jon Bornstein < >>> [email protected]> wrote: >>> >>>> Hi Marton, >>>> >>>> Here is the log: https://gist.github.com/a >>>> nonymous/ac777a70b8e8fc23016c0b6731f24706 >>>> >>> >>> >>> You tried to create the management bridge over enp0s25 but it wasn't >>> configured with an IP address for your host. >>> Could you please configure it or choose a correctly configured interface? >>> >>> >>> 2017-06-14 16:32:22 DEBUG otopi.plugins.gr_he_common.vm.cloud_init >>> cloud_init._getMyIPAddress:115 Acquiring 'enp0s25' address >>> 2017-06-14 16:32:22 DEBUG otopi.plugins.gr_he_common.vm.cloud_init >>> plugin.executeRaw:813 execute: ('/sbin/ip', 'addr', 'show', 'enp0s25'), >>> executable='None', cwd='None', env=None >>> 2017-06-14 16:32:22 DEBUG otopi.plugins.gr_he_common.vm.cloud_init >>> plugin.executeRaw:863 execute-result: ('/sbin/ip', 'addr', 'show', >>> 'enp0s25'), rc=0 >>> 2017-06-14 16:32:22 DEBUG otopi.plugins.gr_he_common.vm.cloud_init >>> plugin.execute:921 execute-output: ('/sbin/ip', 'addr', 'show', 'enp0s25') >>> stdout: >>> 2: enp0s25: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc >>> pfifo_fast state DOWN qlen 1000 >>> link/ether c4:34:6b:26:6a:d1 brd ff:ff:ff:ff:ff:ff >>> >>> 2017-06-14 16:32:22 DEBUG otopi.plugins.gr_he_common.vm.cloud_init >>> plugin.execute:926 execute-output: ('/sbin/ip', 'addr', 'show', 'enp0s25') >>> stderr: >>> >>> >>> 2017-06-14 16:32:22 DEBUG otopi.plugins.gr_he_common.vm.cloud_init >>> cloud_init._getMyIPAddress:132 address: None >>> 2017-06-14 16:32:22 DEBUG otopi.context context._executeMethod:142 >>> method exception >>> Traceback (most recent call last): >>> File "/usr/lib/python2.7/site-packages/otopi/context.py", line 132, >>> in _executeMethod >>> method['method']() >>> File >>> "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-common/vm/cloud_init.py", >>> line 781, in _customize_vm_networking >>> self._customize_vm_addressing() >>> File >>> "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-common/vm/cloud_init.py", >>> line 215, in _customize_vm_addressing >>> my_ip = self._getMyIPAddress() >>> File >>> "/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/gr-he-common/vm/cloud_init.py", >>> line 136, in _getMyIPAddress >>> _('Cannot acquire nic/bridge address') >>> RuntimeError: Cannot acquire nic/bridge address >>> >>> >>> >>> >>>> >>>> On Thu, Jun 15, 2017 at 4:13 AM, Maton, Brett <[email protected] >>>> > wrote: >>>> >>>>> Hi Jon, >>>>> >>>>> There will be people on this list far more able to help you than I >>>>> can, but the contents of the engine setup log >>>>> (/var/log/ovirt-hosted-engine- >>>>> setup/ovirt-hosted-engine-setup-20170614160653-2vuu7h.log) would help >>>>> >>>>> On 14 June 2017 at 21:56, Jon Bornstein <[email protected]> >>>>> wrote: >>>>> >>>>>> This is roughly my 10th attempt at installing some version of oVirt >>>>>> and I think where I get stuck every time is with the networking aspect. >>>>>> >>>>>> I'm simply trying to test out oVirt on an old laptop wiht 16GB RAM >>>>>> and an external HDD. I'm connected via WiFi. >>>>>> >>>>>> After failing 100 times with the regular ovirt engine, It was >>>>>> recommended I try the self-hosted engine. >>>>>> >>>>>> ** >>>>>> >>>>>> Anyway, here are the contents of my /etc/hosts file: >>>>>> 127.0.0.1 localhost localhost.localdomain localhost4 >>>>>> localhost4.localdomain4 >>>>>> ::1 localhost localhost.localdomain localhost6 >>>>>> localhost6.localdomain6 >>>>>> 10.114.13.144 host.example.rocks host >>>>>> 10.114.13.145 engine.example.rocks engine >>>>>> >>>>>> ** >>>>>> >>>>>> After running hosted-engine --deploy, I get to the prompt below in >>>>>> which the installer fails afterwards: >>>>>> >>>>>> You may specify a unicast MAC address for the VM or accept a randomly >>>>>> generated default [00:16:3e:5b:3a:73]: >>>>>> >>>>>> [ ERROR ] Failed to execute stage 'Environment customization': Cannot >>>>>> acquire nic/bridge address >>>>>> [ INFO ] Stage: Clean up >>>>>> [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- >>>>>> setup/answers/answers-20170614163222.conf' >>>>>> [ INFO ] Stage: Pre-termination >>>>>> [ INFO ] Stage: Termination >>>>>> [ ERROR ] Hosted Engine deployment failed >>>>>> Log file is located at /var/log/ovirt-hosted-engine-s >>>>>> etup/ovirt-hosted-engine-setup-20170614160653-2vuu7h.log >>>>>> >>>>>> ** >>>>>> >>>>>> Here is a tail of the log: >>>>>> >>>>>> [root@engine /]# tail /var/log/ovirt-hosted-engine-s >>>>>> etup/ovirt-hosted-engine-setup-20170614160653-2vuu7h.log >>>>>> 2017-06-14 16:32:22 DEBUG otopi.context context._executeMethod:134 >>>>>> condition False >>>>>> 2017-06-14 16:32:22 INFO otopi.context context.runSequence:687 Stage: >>>>>> Termination >>>>>> 2017-06-14 16:32:22 DEBUG otopi.context context.runSequence:691 STAGE >>>>>> terminate >>>>>> 2017-06-14 16:32:22 DEBUG otopi.context context._executeMethod:128 >>>>>> Stage terminate METHOD otopi.plugins.gr_he_common.cor >>>>>> e.misc.Plugin._terminate >>>>>> 2017-06-14 16:32:22 ERROR otopi.plugins.gr_he_common.core.misc >>>>>> misc._terminate:178 Hosted Engine deployment failed >>>>>> 2017-06-14 16:32:22 DEBUG otopi.plugins.otopi.dialog.human >>>>>> dialog.__logString:204 DIALOG:SEND Log file is located at >>>>>> /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup >>>>>> -20170614160653-2vuu7h.log >>>>>> 2017-06-14 16:32:22 DEBUG otopi.context context._executeMethod:128 >>>>>> Stage terminate METHOD otopi.plugins.otopi.dialog.hum >>>>>> an.Plugin._terminate >>>>>> 2017-06-14 16:32:22 DEBUG otopi.context context._executeMethod:128 >>>>>> Stage terminate METHOD otopi.plugins.otopi.dialog.mac >>>>>> hine.Plugin._terminate >>>>>> 2017-06-14 16:32:22 DEBUG otopi.context context._executeMethod:134 >>>>>> condition False >>>>>> 2017-06-14 16:32:22 DEBUG otopi.context context._executeMethod:128 >>>>>> Stage terminate METHOD otopi.plugins.otopi.core.log.Plugin._terminate >>>>>> >>>>>> ** >>>>>> >>>>>> This is my first time writing to this list, so hopefully I'm doing it >>>>>> right. Thanks in advance - this is driving me crazy! >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> [email protected] >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> [email protected] >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> >> >
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
