On Thu, May 18, 2017 at 10:03 AM, Sachidananda URS <s...@redhat.com> wrote:
> Hi, > > On Thu, May 18, 2017 at 7:08 PM, Sahina Bose <sab...@redhat.com> wrote: > >> >> >> On Thu, May 18, 2017 at 3:20 PM, Mike DePaulo <mikedep...@gmail.com> >> wrote: >> >>> Well, I tried both of the following: >>> 1. Having only a boot partition and a PV for the OS that does not take >>> up the entire disk, and then specifying "sda" in Hosted Engine Setup. >>> 2. Having not only a boot partition and a PV for the OS, but also an >>> empty (and not formatted) /dev/sda3 PV that I created with fdisk. >>> Then, specfying "sda3" in Hosted Engine Setup. >>> >>> Both attempts resulted in errors like this: >>> failed: [centerpoint.ad.depaulo.org] (item=/dev/sda3) => {"failed": >>> true, "failed_when_result": true, "item": "/dev/sda3", "msg": " >>> Device /dev/sda3 not found (or ignored by filtering).\n", "rc": 5} >>> >> >> Can you provide gdeploy logs? I think, it's at ~/.gdeploy/gdeploy.log >> >> >>> >>> It seems like having gluster bricks on the same disk as the OS doesn't >>> work at all. >>> >>> > > Hi, /dev/sda3 should work, the error here is possibly due to filesystem > signature. > > Can you please set wipefs=yes? For example > > [pv] > action=create > wipefs=yes > devices=/dev/sda3 > > -sac > > Sorry for the long delay. This worked. Thank you very much. -Mike
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users