Il 07/07/2017 23:21, Gianluca Cecchi ha scritto:
Il 07/Lug/2017 18:38, "Simone Marchioni" <[email protected]
<mailto:[email protected]>> ha scritto:
Hi to all,
I have an old installation of oVirt 3.3 with the Engine on a
separate server. I wanted to test the last oVirt 4.1 with Gluster
Storage and Hosted Engine.
Followed the following tutorial:
http://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/
<http://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/>
... snip ...
[script1]
action=execute
ignore_script_errors=no
file=/usr/share/ansible/gdeploy/scripts/grafton-sanity-check.sh -d
sdb -h ha1.domain.it <http://ha1.domain.it>,ha2.domain.it
<http://ha2.domain.it>,ha3.domain.it <http://ha3.domain.it>
... snip ...
When I hit "Deploy" button the Deployment fails with the following
error:
PLAY [gluster_servers]
*********************************************************
TASK [Run a shell script]
******************************************************
fatal: [ha1.domain.it <http://ha1.domain.it>]: FAILED! =>
{"failed": true, "msg": "The conditional check 'result.rc != 0'
failed. The error was: error while evaluating conditional
(result.rc != 0): 'dict object' has no attribute 'rc'"}
fatal: [ha2.domain.it <http://ha2.domain.it>]: FAILED! =>
{"failed": true, "msg": "The conditional check 'result.rc != 0'
failed. The error was: error while evaluating conditional
(result.rc != 0): 'dict object' has no attribute 'rc'"}
fatal: [ha3.domain.it <http://ha3.domain.it>]: FAILED! =>
{"failed": true, "msg": "The conditional check 'result.rc != 0'
failed. The error was: error while evaluating conditional
(result.rc != 0): 'dict object' has no attribute 'rc'"}
to retry, use: --limit @/tmp/tmpcV3lam/run-script.retry
PLAY RECAP
*********************************************************************
ha1.domain.it <http://ha1.domain.it> : ok=0 changed=0
unreachable=0 failed=1
ha2.domain.it <http://ha2.domain.it> : ok=0 changed=0
unreachable=0 failed=1
ha3.domain.it <http://ha3.domain.it> : ok=0 changed=0
unreachable=0 failed=1
What I'm doing wrong? Maybe I need to initializa glusterfs in some
way...
What are the logs used to log the status of this deployment so I
can check the errors?
Thanks in advance!
Simone
_______________________________________________
Gdeploy uses ansible that seems to fail at its first step when
executing its shell module
http://docs.ansible.com/ansible/shell_module.html
In practice in my opinion the shell script defined by [script1]
(grafton-sanity-check.sh) above doesn't exit with a return code (rc)
for some reason...
Perhaps you have already done a partial step previously? or your
disks already contain a label?
Is it correct sdb as the target for your disk configuration for gluster?
I would try to reinitialize the disks, such as
dd if=/dev/zero of=/dev/sdb bs=1024k count=1
ONLY if it is correct that sdb is the disk to format for brick
filesystem..
Hih,
Gianluca
Hi Gianluca,
thanks for your reply.
I didn't do any previous step: the 3 servers are freshly installed.
The disk was wrong: I had to use /dev/md128. Replaced sdb with the
correct one and redeployed, but the error was exactly the same. The
disks are already initialized because I created the XFS filesystem on
/dev/md128 before the deploy.
In /var/log/messages there is no error.
Hi,
Simone
_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users
