Sorry Erekle, I am just a beginner...

>From the hosted engine I can put the two other servers, that are not hosting 
>the hosted-engine, on maintenance, and that was what I did. When I tried to 
>put the last one on maintenance it did not allow me due to the hosted-engine 
>and I force it shunting down from the ssh CLI.

So, what should I do? My guess is that I should ssh to the hosted engine and 
shut it down. As it would not have another node to re-launch itself, then it 
would stay down. After this I should shutdown the oVirt node. Is it?

Anyway, I made a mistake and I forced it. When I try to bring the cluster back, 
I noticed that glusterd was not enabled to start when the node power-on. As I 
am a beginner, I "think" that there must be a reason to not start glusterd when 
the node comes up. So I started glusterd on the arbitrator (3rd server), then 
on the second node and finally on the host that was hosting the hosted-engine. 
It worked, but when I try to change the maintenance mode on the two nodes (2nd 
and 3rd) back to normal, the hosted-engine went down and I had to start it 

All this said, I would like to know how to bring the cluster down and how to 
bring it back on in the "right way" so I don't get problems. And yes, no VM is 
running but the hosted-engine.

Thanks for sharing your knowledge.


From: Erekle Magradze <>
Sent: Monday, August 7, 2017 9:12 PM
To: Moacir Ferreira;
Subject: Re: [ovirt-users] How to shutdown an oVirt cluster with Gluster and 
hosted engine

Hi Moacir,

First switch off all VMs.

Second you need to declare hosts maintenance mode, don't start with SRM (of 
course if you are able use the ovirt-engine), it will ask you to shutdown the 
glusterfs on a machine.

Third if all machines are in maintenance mode, you can start shutting down them.

If you have hosted engine setup follow this [1]





OSVDC Series: oVirt 3.6 Cluster Shutdown and Startup 
Contribute to richtech development by creating an account on GitHub.

On 08/07/2017 08:58 PM, Moacir Ferreira wrote:

I have installed a oVirt cluster in a KVM virtualized test environment. Now, 
how do I properly shutdown the oVirt cluster, with Gluster and the hosted 

I.e.: I want to install a cluster of 3 servers and then send it to a remote 
office. How do I do it properly? I noticed that glusterd is not enabled to 
start automatically. And how do I deal with the hosted engine?



Users mailing list<>

Recogizer Group GmbH

Dr.rer.nat. Erekle Magradze
Lead Big Data Engineering & DevOps
Rheinwerkallee 2, 53227 Bonn
Tel: +49 228 29974555


Recogizer auf LinkedIn
Folgen Sie uns auf Twitter

Recogizer Group GmbH
Geschäftsführer: Oliver Habisch, Carsten Kreutze
Handelsregister: Amtsgericht Bonn HRB 20724
Sitz der Gesellschaft: Bonn; USt-ID-Nr.: DE294195993

Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen.
Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten 
informieren Sie bitte sofort den Absender und löschen Sie diese Mail.
Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail und der 
darin enthaltenen Informationen ist nicht gestattet.
Users mailing list

Reply via email to