Dnia 20 września 2017 15:54 Kasturi Narra <[email protected]> napisał(a): Hi, upgrade HE (Hosted Engine ) by doing the steps below. 1) Move HE to global maintenance by running the command 'hosted-engine --set-maintenance --mode=global' 2) Add the required repos which has higher package versions. 3) Run 'yum update ovirt\*setup\*' What if we upgrade all packages by 'yum update'? 4) engine-setup 5) Once the setup is done successfully please move HE out of global maintenance mode by running the command 'hosted-engine --set-maintenance --mode=none' For upgrade node you can do the steps below: 1) If there is an upgrade link present in the 'General' tab of the UI, (if ovirt node) click upgrade from UI which will move the host to maintenance and run upgrade on the system, reboots and brings it back up to Normal state. 2) If you do not see the upgrade link, then add the repos to which you would want to update the node. 3) Run 'yum update' 4) Reboot the system. 5) make sure that you are on the latest image by running 'imgbase w' if it is a ovirt node. 6)otherwise just make sure that you are on the latest kernel once your upgrade finishes. THANK YOU! Hope this helps !!!! Thanks kasturi On Wed, Sep 20, 2017 at 6:34 PM, [email protected] < [email protected] > wrote: To be honest, I don't see consistency regarding all that upgrade procedures. Have a look here: www.ovirt.org www.ovirt.org documentation/upgrade-guide/ chap-Updating_the_oVirt_ Environment/ It asks to update the system too :) I will appreciate if somebody clearly explains: -to upgrade the Node - please do this and this -to upgrade the Hosted-Engine - please do this and this. G. Dnia 20 września 2017 14:52 Johan Bernhardsson < [email protected] > napisał(a): If you follow that guide it will update everything on the virtual server running the engine. You should not run yum to upgrade the packages (correct me anyone if i am wrong about this) The engine-setup will download and install the packages for you. And on the nodes upgrade first via the web interface and after that you can upgrade with yum on the nodes. Don't forget to have the node in maintence mode when you run yum update /Johan 2017-09-20 14:39 skrev [email protected] : Thanks. What about the system itself? Is yum update enough? Dnia 20 września 2017 13:25 Johan Bernhardsson < [email protected] > napisał(a): Follow this guide if it is between minor releases www.ovirt.org www.ovirt.org documentation/upgrade-guide/ chap-Updates_between_Minor_ Releases/ Don't forget to send the hosted-engine to global maintenance /Johan On September 20, 2017 13:11:41 [email protected] wrote: In oVirt Engine Web Administration portal I can see option to upgrade the nodes but can't see any option to upgrade hosted-engine itself? What is the recommended procedure for it? ______________________________ _________________ Users mailing list [email protected] lists.ovirt.org lists.ovirt.org mailman/listinfo/users -- Security all the way ... Linux/CMS/Network/Print/ Virtualisation/VoIP Consultant Kafit AB Orgnr: 556792-5945 Mobile: +46705111751 Sweden: +46101993005 Seychelles: +2486478105 Uk: +448701821792 Email: [email protected] Web: www.kafit.se www.kafit.se Connect with me on LinkedIn: www.linkedin.com www.linkedin.com smallone About me: about.me about.me ______________________________ _________________ Users mailing list [email protected] lists.ovirt.org lists.ovirt.org mailman/listinfo/users
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
