On Sun, Jan 14, 2018 at 12:34 AM, Gunder Johansen <gantonjo-ov...@yahoo.com> wrote: > > Thanks, Fred. > > I have been looking at FCoE VDSM Hooks to no help. Looking at it again, I am > still not able to see any FCoE > > [root@ovirtengine ~]# engine-config -g UserDefinedNetworkCustomProperties > UserDefinedNetworkCustomProperties: version: 3.6 > UserDefinedNetworkCustomProperties: version: 4.0 > UserDefinedNetworkCustomProperties: > fcoe=^((enable|dcb|auto_vlan)=(yes|no),?)*$ version: 4.1 > UserDefinedNetworkCustomProperties: > fcoe=^((enable|dcb|auto_vlan)=(yes|no),?)*$ version: 4.2 > > I finally managed to find the "custom Property" where I could set > "enable=yes,dcb=no" for fcoe, but when applying the change, I get unexepected > error. Yes, the host was in local maintenance mode when I applied the change. > > I am afraid I am not understanding all the steps needed from the Virtual > Connect configuration in the blade rack to the network interfaces inside > oVirt. Should I add a new FCoE only network interface and should this have > VLAN/IP address in a special range compared to the internal network in the > rack? >
Hi Gunder, from my experience (we have several C7000 Chassis with Virtual Connect), blades sees the FCoE connection as a standard FC connection. We use 650FLB - HP FlexFabric 20Gb 2-port 650FLB Adapter, and we add all the storage using "Fibre Channel" storage type. Luca -- "E' assurdo impiegare gli uomini di intelligenza eccellente per fare calcoli che potrebbero essere affidati a chiunque se si usassero delle macchine" Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) "Internet è la più grande biblioteca del mondo. Ma il problema è che i libri sono tutti sparsi sul pavimento" John Allen Paulos, Matematico (1945-vivente) Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.l...@gmail.com> _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users