Yes there are on the same subnet. On Wed, Jan 24, 2018 at 11:58 AM, Petr Horacek <[email protected]> wrote:
> Could you hover the Out-Of-Sync icon in Setup Networks dialog and check > what is causing the issue? > > Are both interfaces, you use DHCP on, connected to the same subnet? > > 2018-01-24 17:34 GMT+01:00 carl langlois <[email protected]>: > >> Hi Petr, >> >> The "VM Network" explain why i do not have the bridge, thanks for the >> precision. >> But i still have my problem..but i suspect my problem to be >> routing/gateway issue. Should it be using Static address if i already have >> the other interface use DHCP? >> I have try using DHCP with the other interface but when i manually bring >> it up i got difficulty reaching this host.. >> >> Any hints? >> >> Carl >> >> >> >> >> >> On Tue, Jan 23, 2018 at 1:33 PM, Petr Horacek <[email protected]> >> wrote: >> >>> Hello Carl, >>> >>> If you did not mark the network as "VM Network" it will be created >>> bridgeless. >>> >>> Do you think you could share vdsm.log and supervdsm.log from your host, >>> so I could look into it? >>> >>> Thanks, >>> Petr >>> >>> 2018-01-23 18:35 GMT+01:00 carl langlois <[email protected]>: >>> >>>> Hi Kasturi >>>> >>>> Thanks for the help. When i am able to add a new network but when i try >>>> to sync the network it always stay out of sync and if i ssh to that host i >>>> do not see the bridge but the network card is up and a ip is assign to it. >>>> >>>> Thanks >>>> >>>> Carl >>>> >>>> On Tue, Jan 23, 2018 at 2:38 AM, Kasturi Narra <[email protected]> >>>> wrote: >>>> >>>>> Hi Carl, >>>>> >>>>> Below are the steps to configure back end network which is >>>>> glusternw. >>>>> >>>>> 1) create a new network called 'glusternw' >>>>> 2) Now go to clusters tab and select Logical networks tab. >>>>> 3) You should see the newly created network there. >>>>> 4) select the network and click on 'Manage Networks' >>>>> 5) In Manage networks window for the newly created network select both >>>>> 'Migration' & glusternw and click ok. >>>>> 6) Now go to the hosts tab click on one host and select 'Network >>>>> Interfaces' tab. >>>>> 7) select the interface to which you would like to assign the backend >>>>> network, drag and drop glusternw to that interface and click ok >>>>> 8) You will see that network is now out of sync. >>>>> 9) Please click refresh capabilities which will bring the network >>>>> online. >>>>> >>>>> Hope this helps !! >>>>> >>>>> Thanks >>>>> kasturi >>>>> >>>>> On Tue, Jan 23, 2018 at 5:33 AM, carl langlois <[email protected] >>>>> > wrote: >>>>> >>>>>> HI all, >>>>>> >>>>>> I am trying to add second network for back-end traffic. My setup is a >>>>>> 3 hosts running with gluster storage in 3+1 replicat. Now i am trying to >>>>>> add a second network with the UI and when i try to had a the host >>>>>> interface >>>>>> to the new network it is always failing and i lost communication with >>>>>> this >>>>>> host. I am not sure what are the step to add a second network with >>>>>> already >>>>>> 3 Host in the cluster. >>>>>> >>>>>> My setup us 4.2. >>>>>> >>>>>> Any inputs would be appreciated. >>>>>> >>>>>> Thanks >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> [email protected] >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> [email protected] >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> >> >
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
