So I have some good news and some bad news.

The good news is that I just used the provided OVA and identified the
issues that prevent oVirt from processing its OVF configuration:
1. The <File> element in the References section lacks ovf:size attribute
and oVirt unfortunately, is not prepared for this.
2. The USB item doesn't include an oVirt-specific attribute (makes sense..)
that oVirt require (that doesn't make sense..) called usbPolicy.

I'll post fixes for those issues.
In the meantime, the OVF can be modified with the following changes:
1. Add ovf:size="3221225472" to the File element (there's no need for more
than 3gb, even 2gb should be enough).
2. Remove the following Item:

<Item>

  <rasd:Address>0</rasd:Address>

  <rasd:Caption>usb</rasd:Caption>

  <rasd:Description>USB Controller</rasd:Description>

  <rasd:ElementName>usb</rasd:ElementName>

  <rasd:InstanceID>6</rasd:InstanceID>

  <rasd:ResourceType>23</rasd:ResourceType>

</Item>

The bad news is that the conversion that would finally start with those
changes then fails on my host (with virt-v2v v1.36.3) with the following
error:

supermin: failed to find a suitable kernel (host_cpu=x86_64).


I looked for kernels in /boot and modules in /lib/modules.


If this is a Xen guest, and you only have Xen domU kernels

installed, try installing a fullvirt kernel (only for

supermin use, you shouldn't boot the Xen guest with it).

libguestfs: trace: v2v: launch = -1 (error)


@Richard, this is an OVA of a VM installed with Debian64 as guest OS that
was exported from VirtualBox, is it supported by virt-v2v?

On Wed, Feb 21, 2018 at 7:10 PM, Jiří Sléžka <jiri.sle...@slu.cz> wrote:

> On 02/21/2018 05:35 PM, Arik Hadas wrote:
> >
> >
> > On Wed, Feb 21, 2018 at 6:03 PM, Jiří Sléžka <jiri.sle...@slu.cz
> > <mailto:jiri.sle...@slu.cz>> wrote:
> >
> >     On 02/21/2018 03:43 PM, Jiří Sléžka wrote:
> >     > On 02/20/2018 11:09 PM, Arik Hadas wrote:
> >     >>
> >     >>
> >     >> On Tue, Feb 20, 2018 at 6:37 PM, Jiří Sléžka <jiri.sle...@slu.cz
> >     <mailto:jiri.sle...@slu.cz>
> >     >> <mailto:jiri.sle...@slu.cz <mailto:jiri.sle...@slu.cz>>> wrote:
> >     >>
> >     >>     On 02/20/2018 03:48 PM, Arik Hadas wrote:
> >     >>     >
> >     >>     >
> >     >>     > On Tue, Feb 20, 2018 at 3:49 PM, Jiří Sléžka
> >     <jiri.sle...@slu.cz <mailto:jiri.sle...@slu.cz>
> >     <mailto:jiri.sle...@slu.cz <mailto:jiri.sle...@slu.cz>>
> >     >>     > <mailto:jiri.sle...@slu.cz <mailto:jiri.sle...@slu.cz>
> >     <mailto:jiri.sle...@slu.cz <mailto:jiri.sle...@slu.cz>>>> wrote:
> >     >>     >
> >     >>     >     Hi Arik,
> >     >>     >
> >     >>     >     On 02/20/2018 01:22 PM, Arik Hadas wrote:
> >     >>     >     >
> >     >>     >     >
> >     >>     >     > On Tue, Feb 20, 2018 at 2:03 PM, Jiří Sléžka
> >     <jiri.sle...@slu.cz <mailto:jiri.sle...@slu.cz>
> >     <mailto:jiri.sle...@slu.cz <mailto:jiri.sle...@slu.cz>>
> >     >>     <mailto:jiri.sle...@slu.cz <mailto:jiri.sle...@slu.cz>
> >     <mailto:jiri.sle...@slu.cz <mailto:jiri.sle...@slu.cz>>>
> >     >>     >     > <mailto:jiri.sle...@slu.cz
> >     <mailto:jiri.sle...@slu.cz> <mailto:jiri.sle...@slu.cz
> >     <mailto:jiri.sle...@slu.cz>>
> >     >>     <mailto:jiri.sle...@slu.cz <mailto:jiri.sle...@slu.cz>
> >     <mailto:jiri.sle...@slu.cz <mailto:jiri.sle...@slu.cz>>>>> wrote:
> >     >>     >     >
> >     >>     >     >     Hi,
> >     >>     >     >
> >     >>     >     >
> >     >>     >     > Hi Jiří,
> >     >>     >     >
> >     >>     >     >
> >     >>     >     >
> >     >>     >     >     I would like to try import some ova files into
> >     our oVirt
> >     >>     instance [1]
> >     >>     >     >     [2] but I facing problems.
> >     >>     >     >
> >     >>     >     >     I have downloaded all ova images into one of hosts
> >     >>     (ovirt01) into
> >     >>     >     >     direcory /ova
> >     >>     >     >
> >     >>     >     >     ll /ova/
> >     >>     >     >     total 6532872
> >     >>     >     >     -rw-r--r--. 1 vdsm kvm 1160387072 Feb 16 16:21
> >     >>     HAAS-hpcowrie.ovf
> >     >>     >     >     -rw-r--r--. 1 vdsm kvm 1111785984 Feb 16 16:22
> >     >>     HAAS-hpdio.ova
> >     >>     >     >     -rw-r--r--. 1 vdsm kvm  846736896 Feb 16 16:22
> >     >>     HAAS-hpjdwpd.ova
> >     >>     >     >     -rw-r--r--. 1 vdsm kvm  891043328 Feb 16 16:23
> >     >>     HAAS-hptelnetd.ova
> >     >>     >     >     -rw-r--r--. 1 vdsm kvm  908222464 Feb 16 16:23
> >     >>     HAAS-hpuchotcp.ova
> >     >>     >     >     -rw-r--r--. 1 vdsm kvm  880643072 Feb 16 16:24
> >     >>     HAAS-hpuchoudp.ova
> >     >>     >     >     -rw-r--r--. 1 vdsm kvm  890833920 Feb 16 16:24
> >     >>     HAAS-hpuchoweb.ova
> >     >>     >     >
> >     >>     >     >     Then I tried to import them - from host ovirt01
> and
> >     >>     directory /ova but
> >     >>     >     >     spinner spins infinitly and nothing is happen.
> >     >>     >     >
> >     >>     >     >
> >     >>     >     > And does it work when you provide a path to the
> >     actual ova
> >     >>     file, i.e.,
> >     >>     >     > /ova/HAAS-hpdio.ova, rather than to the directory?
> >     >>     >
> >     >>     >     this time it ends with "Failed to load VM configuration
> >     from
> >     >>     OVA file:
> >     >>     >     /ova/HAAS-hpdio.ova" error.
> >     >>     >
> >     >>     >
> >     >>     > Note that the logic that is applied on a specified folder
> >     is "try
> >     >>     > fetching an 'ova folder' out of the destination folder"
> >     rather than
> >     >>     > "list all the ova files inside the specified folder". It
> seems
> >     >>     that you
> >     >>     > expected the former output since there are no disks in that
> >     >>     folder, right?
> >     >>
> >     >>     yes, It would be more user friendly to list all ova files and
> >     then
> >     >>     select which one to import (like listing all vms in vmware
> >     import)
> >     >>
> >     >>     Maybe description of path field in manager should be "Path to
> >     ova file"
> >     >>     instead of "Path" :-)
> >     >>
> >     >>
> >     >> Sorry, I obviously meant 'latter' rather than 'former' before..
> >     >> Yeah, I agree that would be better, at least until listing the
> >     OVA files
> >     >> in the folder is implemented (that was the original plan, btw) -
> >     could
> >     >> you please file a bug?
> >     >
> >     > yes, sure
> >     >
> >     >
> >     >>     >     >     I cannot see anything relevant in vdsm log of
> >     host ovirt01.
> >     >>     >     >
> >     >>     >     >     In the engine.log of our standalone ovirt manager
> >     is just this
> >     >>     >     >     relevant line
> >     >>     >     >
> >     >>     >     >     2018-02-20 12:35:04,289+01 INFO
> >     >>     >     >
> >      [org.ovirt.engine.core.common.utils.ansible.AnsibleExecutor]
> (default
> >     >>     >     >     task-31) [458990a7-b054-491a-904e-5c4fe44892c4]
> >     Executing Ansible
> >     >>     >     >     command: ANSIBLE_STDOUT_CALLBACK=ovaqueryplugin
> >     >>     >     >     [/usr/bin/ansible-playbook,
> >     >>     >     >
> >      --private-key=/etc/pki/ovirt-engine/keys/engine_id_rsa,
> >     >>     >     >
> >      --inventory=/tmp/ansible-inventory8237874608161160784,
> >     >>     >     >     --extra-vars=ovirt_query_ova_path=/ova,
> >     >>     >     >
> >      /usr/share/ovirt-engine/playbooks/ovirt-ova-query.yml] [Logfile:
> >     >>     >     >
> >      /var/log/ovirt-engine/ova/ovirt-query-ova-ansible-
> 20180220123504-ovirt01.net
> >     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net>
> >     >>     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net
> >     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net>>
> >     >>     >
> >      <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net
> >     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net>
> >     >>     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net
> >     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net>>>
> >     >>     >     >     <http://20180220123504-ovirt01.net
> >     <http://20180220123504-ovirt01.net>
> >     >>     <http://20180220123504-ovirt01.net
> >     <http://20180220123504-ovirt01.net>>
> >     >>     >     <http://20180220123504-ovirt01.net
> >     <http://20180220123504-ovirt01.net>
> >     >>     <http://20180220123504-ovirt01.net
> >     <http://20180220123504-ovirt01.net>>>>.slu.cz.log]
> >     >>     >     >
> >     >>     >     >     also there are two ansible processes which are
> >     still running
> >     >>     >     (and makes
> >     >>     >     >     heavy load on system (load 9+ and growing, it
> >     looks like it
> >     >>     >     eats all the
> >     >>     >     >     memory and system starts swapping))
> >     >>     >     >
> >     >>     >     >     ovirt    32087  3.3  0.0 332252  5980 ?        Sl
> >     >>      12:35   0:41
> >     >>     >     >     /usr/bin/python2 /usr/bin/ansible-playbook
> >     >>     >     >
> >      --private-key=/etc/pki/ovirt-engine/keys/engine_id_rsa
> >     >>     >     >     --inventory=/tmp/ansible-
> inventory8237874608161160784
> >     >>     >     >     --extra-vars=ovirt_query_ova_path=/ova
> >     >>     >     >     /usr/share/ovirt-engine/
> playbooks/ovirt-ova-query.yml
> >     >>     >     >     ovirt    32099 57.5 78.9 15972880 11215312 ?   R
>
> >     >>     12:35  11:52
> >     >>     >     >     /usr/bin/python2 /usr/bin/ansible-playbook
> >     >>     >     >
> >      --private-key=/etc/pki/ovirt-engine/keys/engine_id_rsa
> >     >>     >     >     --inventory=/tmp/ansible-
> inventory8237874608161160784
> >     >>     >     >     --extra-vars=ovirt_query_ova_path=/ova
> >     >>     >     >     /usr/share/ovirt-engine/
> playbooks/ovirt-ova-query.yml
> >     >>     >     >
> >     >>     >     >     playbook looks like
> >     >>     >     >
> >     >>     >     >     - hosts: all
> >     >>     >     >       remote_user: root
> >     >>     >     >       gather_facts: no
> >     >>     >     >
> >     >>     >     >       roles:
> >     >>     >     >         - ovirt-ova-query
> >     >>     >     >
> >     >>     >     >     and it looks like it only runs query_ova.py but
> >     on all
> >     >>     hosts?
> >     >>     >     >
> >     >>     >     >
> >     >>     >     > No, the engine provides ansible the host to run on
> >     when it
> >     >>     >     executes the
> >     >>     >     > playbook.
> >     >>     >     > It would only be executed on the selected host.
> >     >>     >     >
> >     >>     >     >
> >     >>     >     >
> >     >>     >     >     How does this work? ...or should it work?
> >     >>     >     >
> >     >>     >     >
> >     >>     >     > It should, especially that part of querying the OVA
> >     and is
> >     >>     supposed to
> >     >>     >     > be really quick.
> >     >>     >     > Can you please share the engine log and
> >     >>     >     >
> >     >>     >
> >     >>
> >       /var/log/ovirt-engine/ova/ovirt-query-ova-ansible-
> 20180220123504-ovirt01.net
> >     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net>
> >     >>     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net
> >     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net>>
> >     >>     >
> >      <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net
> >     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net>
> >     >>     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net
> >     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net>>>
> >     >>     >     > <http://20180220123504-ovirt01.net
> >     <http://20180220123504-ovirt01.net>
> >     >>     <http://20180220123504-ovirt01.net
> >     <http://20180220123504-ovirt01.net>>
> >     >>     >     <http://20180220123504-ovirt01.net
> >     <http://20180220123504-ovirt01.net>
> >     >>     <http://20180220123504-ovirt01.net
> >     <http://20180220123504-ovirt01.net>>>>.slu.cz.log ?
> >     >>     >
> >     >>     >     engine log is here:
> >     >>     >
> >     >>     >     https://pastebin.com/nWWM3UUq
> >     >>     >
> >     >>     >
> >     >>     > Thanks.
> >     >>     > Alright, so now the configuration is fetched but its
> >     processing fails.
> >     >>     > We fixed many issues in this area recently, but it appears
> that
> >     >>     > something is wrong with the actual size of the disk within
> >     the ovf file
> >     >>     > that resides inside this ova file.
> >     >>     > Can you please share that ovf file that resides
> >     inside /ova/HAAS-hpdio.ova?
> >     >>
> >     >>     file HAAS-hpdio.ova
> >     >>     HAAS-hpdio.ova: POSIX tar archive (GNU)
> >     >>
> >     >>     [root@ovirt01 backup]# tar xvf HAAS-hpdio.ova
> >     >>     HAAS-hpdio.ovf
> >     >>     HAAS-hpdio-disk001.vmdk
> >     >>
> >     >>     file HAAS-hpdio.ovf is here:
> >     >>
> >     >>     https://pastebin.com/80qAU0wB
> >     >>
> >     >>
> >     >> Thanks again.
> >     >> So that seems to be a VM that was exported from Virtual Box,
> right?
> >     >> They don't do anything that violates the OVF specification but
> >     they do
> >     >> some non-common things that we don't anticipate:
> >     >
> >     > yes, it is most likely ova from VirtualBox
> >     >
> >     >> First, they don't specify the actual size of the disk and the
> current
> >     >> code in oVirt relies on that property.
> >     >> There is a workaround for this though: you can extract an OVA
> >     file, edit
> >     >> its OVF configuration - adding ovf:populatedSize="X" (and change
> >     >> ovf:capacity as I'll describe next) to the Disk element inside the
> >     >> DiskSection and pack the OVA again (tar cvf <ovf_file>
> >     <disk_file) where
> >     >> X is either:
> >     >> 1. the actual size of the vmdk file + some buffer (iirc, we used
> >     to take
> >     >> 15% of extra space for the conversion)
> >     >> 2. if you're using a file storage or you don't mind consuming more
> >     >> storage space on your block storage, simply set X to the virtual
> >     size of
> >     >> the disk (in bytes) as indicated by the ovf:capacity filed, e.g.,
> >     >> ovf:populatedSize="21474836480" in the case of HAAS-hpdio.ova.
> >     >>
> >     >> Second, the virtual size (indicated by ovf:capacity) is specified
> in
> >     >> bytes. The specification says that the default unit of allocation
> >     shall
> >     >> be bytes, but practically every OVA file that I've ever saw
> >     specified it
> >     >> in GB and the current code in oVirt kind of assumes that this is
> the
> >     >> case without checking the ovf:capacityAllocationUnits attribute
> that
> >     >> could indicate the real unit of allocation [1].
> >     >> Anyway, long story short, the virtual size of the disk should
> >     currently
> >     >> be specified in GB, e.g., ovf:populatedSize="20" in the case of
> >     >> HAAS-hpdio.ova.
> >     >
> >     > wow, thanks for this excellent explanation. I have changed this in
> >     ovf file
> >     >
> >     > ...
> >     > <Disk ovf:capacity="20" ovf:diskId="vmdisk2"
> >     ovf:populatedSize="20" ...
> >     > ...
> >     >
> >     > then I was able to import this mofified ova file
> (HAAS-hpdio_new.ova).
> >     > Interesting thing is that the vm was shown in vm list for while
> (with
> >     > state down with lock and status was initializing). After while
> this vm
> >     > disapeared :-o
> >     >
> >     > I am going to test it again and collect some logs...
> >
> >     there are interesting logs in /var/log/vdsm/import/ at the host used
> for
> >     import
> >
> >     http://mirror.slu.cz/tmp/ovirt-import.tar.bz2
> >     <http://mirror.slu.cz/tmp/ovirt-import.tar.bz2>
> >
> >     first of them describes situation where I chose thick provisioning,
> >     second situation with thin provisioning
> >
> >     interesting part is I believe
> >
> >     libguestfs: command: run: qemu-img
> >     libguestfs: command: run: \ create
> >     libguestfs: command: run: \ -f qcow2
> >     libguestfs: command: run: \ -o preallocation=off,compat=0.10
> >     libguestfs: command: run: \
> >     /rhev/data-center/mnt/blockSD/088e7ed9-84c7-4fbd-a570-
> f37fa986a772/images/d44e1890-3e42-420b-939c-dac1290e19af/
> 9edcccbc-b244-4b94-acd3-3c8ee12bbbec
> >     libguestfs: command: run: \ 21474836480
> >     Formatting
> >     '/rhev/data-center/mnt/blockSD/088e7ed9-84c7-4fbd-
> a570-f37fa986a772/images/d44e1890-3e42-420b-939c-
> dac1290e19af/9edcccbc-b244-4b94-acd3-3c8ee12bbbec',
> >     fmt=qcow2 size=21474836480 compat=0.10 encryption=off
> cluster_size=65536
> >     preallocation=off lazy_refcounts=off refcount_bits=16
> >     libguestfs: trace: vdsm_disk_create: disk_create = 0
> >     qemu-img 'convert' '-p' '-n' '-f' 'qcow2' '-O' 'qcow2'
> >     '/var/tmp/v2vovl2dccbd.qcow2'
> >     '/rhev/data-center/mnt/blockSD/088e7ed9-84c7-4fbd-
> a570-f37fa986a772/images/d44e1890-3e42-420b-939c-
> dac1290e19af/9edcccbc-b244-4b94-acd3-3c8ee12bbbec'
> >     qemu-img: error while writing sector 1000960: No space left on device
> >
> >     virt-v2v: error: qemu-img command failed, see earlier errors
> >
> >
> >
> > Sorry again, I made a mistake in:
> >  "Anyway, long story short, the virtual size of the disk should currently
> >  be specified in GB, e.g., ovf:populatedSize="20" in the case of
> >  HAAS-hpdio.ova."
> > I should have write ovf:capacity="20".
> > So if you wish the actual size of the disk to be 20GB (which means the
> > disk is preallocated), the disk element should be set with:
> > <Disk ovf:capacity="20" ovf:diskId="vmdisk2"
> > ovf:populatedSize="21474836480" ...
>
>
> now I have this inf ovf file
>
> <Disk ovf:capacity="20" ovf:diskId="vmdisk2"
> ovf:populatedSize="21474836480"...
>
> but while import it fails again, but in this case faster. It looks like
> SPM cannot create disk image
>
> log from SPM host...
>
> 2018-02-21 18:02:03,599+0100 INFO  (jsonrpc/1) [vdsm.api] START
> createVolume(sdUUID=u'69f6b3e7-d754-44cf-a665-9d7128260401',
> spUUID=u'00000002-0002-0002-0002-0000000002b9',
> imgUUID=u'0a5c4ecb-2c04-4f96-858a-4f74915d5caa', size=u'20',
> volFormat=4, preallocate=2, diskType=u'DATA',
> volUUID=u'bd3ae91a-3b37-4610-9ad3-6c5fdc6cc9b0',
> desc=u'{"DiskAlias":"HAAS-hpdio-disk001.vmdk","DiskDescription":""}',
> srcImgUUID=u'00000000-0000-0000-0000-000000000000',
> srcVolUUID=u'00000000-0000-0000-0000-000000000000',
> initialSize=u'21474836480') from=::ffff:193.84.206.172,53154,
> flow_id=e27cd35a-dc4e-4e72-a3ef-aa5b67c2bdab,
> task_id=e7598aa1-420a-4612-9ee8-03012b1277d9 (api:46)
> 2018-02-21 18:02:03,603+0100 INFO  (jsonrpc/1) [IOProcessClient]
> Starting client ioprocess-3931 (__init__:330)
> 2018-02-21 18:02:03,638+0100 INFO  (ioprocess/56120) [IOProcess]
> Starting ioprocess (__init__:452)
> 2018-02-21 18:02:03,661+0100 INFO  (jsonrpc/1) [vdsm.api] FINISH
> createVolume return=None from=::ffff:193.84.206.172,53154,
> flow_id=e27cd35a-dc4e-4e72-a3ef-aa5b67c2bdab,
> task_id=e7598aa1-420a-4612-9ee8-03012b1277d9 (api:52)
> 2018-02-21 18:02:03,692+0100 INFO  (jsonrpc/1) [jsonrpc.JsonRpcServer]
> RPC call Volume.create succeeded in 0.09 seconds (__init__:573)
> 2018-02-21 18:02:03,694+0100 INFO  (tasks/1)
> [storage.ThreadPool.WorkerThread] START task
> e7598aa1-420a-4612-9ee8-03012b1277d9 (cmd=<bound method Task.commit of
> <vdsm.storage.task.Task instance at 0x3faa050>>, args=None)
> (threadPool:208)
> 2018-02-21 18:02:03,995+0100 INFO  (tasks/1) [storage.StorageDomain]
> Create placeholder
> /rhev/data-center/mnt/blockSD/69f6b3e7-d754-44cf-a665-
> 9d7128260401/images/0a5c4ecb-2c04-4f96-858a-4f74915d5caa
> for image's volumes (sd:1244)
> 2018-02-21 18:02:04,016+0100 INFO  (tasks/1) [storage.Volume] Creating
> volume bd3ae91a-3b37-4610-9ad3-6c5fdc6cc9b0 (volume:1151)
> 2018-02-21 18:02:04,060+0100 ERROR (tasks/1) [storage.Volume] The
> requested initial 21474836480 is bigger than the max size 134217728
> (blockVolume:345)
> 2018-02-21 18:02:04,060+0100 ERROR (tasks/1) [storage.Volume] Failed to
> create volume
> /rhev/data-center/mnt/blockSD/69f6b3e7-d754-44cf-a665-
> 9d7128260401/images/0a5c4ecb-2c04-4f96-858a-4f74915d5caa/
> bd3ae91a-3b37-4610-9ad3-6c5fdc6cc9b0:
> Invalid parameter: 'initial size=41943040' (volume:1175)
> 2018-02-21 18:02:04,061+0100 ERROR (tasks/1) [storage.Volume] Unexpected
> error (volume:1215)
> Traceback (most recent call last):
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line
> 1172, in create
>     initialSize=initialSize)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/blockVolume.py",
> line 501, in _create
>     size, initialSize)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/blockVolume.py",
> line 545, in calculate_volume_alloc_size
>     preallocate, capacity, initial_size)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/blockVolume.py",
> line 347, in calculate_volume_alloc_size
>     initial_size)
> InvalidParameterException: Invalid parameter: 'initial size=41943040'
> 2018-02-21 18:02:04,062+0100 ERROR (tasks/1) [storage.TaskManager.Task]
> (Task='e7598aa1-420a-4612-9ee8-03012b1277d9') Unexpected error (task:875)
> Traceback (most recent call last):
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line
> 882, in _run
>     return fn(*args, **kargs)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/task.py", line
> 336, in run
>     return self.cmd(*self.argslist, **self.argsdict)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/securable.py",
> line 79, in wrapper
>     return method(self, *args, **kwargs)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/sp.py", line 1936,
> in createVolume
>     initialSize=initialSize)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/sd.py", line 801,
> in createVolume
>     initialSize=initialSize)
>   File "/usr/lib/python2.7/site-packages/vdsm/storage/volume.py", line
> 1217, in create
>     (volUUID, e))
> VolumeCreationError: Error creating a new volume: (u"Volume creation
> bd3ae91a-3b37-4610-9ad3-6c5fdc6cc9b0 failed: Invalid parameter: 'initial
> size=41943040'",)
>
> there are no new logs in import folder on host used for import...
>
>
>
> >
> >
> >
> >     >
> >     >> That should do it. If not, please share the OVA file and I will
> >     examine
> >     >> it in my environment.
> >     >
> >     > original file is at
> >     >
> >     > https://haas.cesnet.cz/downloads/release-01/HAAS-hpdio.ova
> >     <https://haas.cesnet.cz/downloads/release-01/HAAS-hpdio.ova>
> >     >
> >     >>
> >     >>
> >     [1] https://github.com/oVirt/ovirt-engine/blob/master/
> backend/manager/modules/utils/src/main/java/org/ovirt/
> engine/core/utils/ovf/OvfOvaReader.java#L220
> >     <https://github.com/oVirt/ovirt-engine/blob/master/
> backend/manager/modules/utils/src/main/java/org/ovirt/
> engine/core/utils/ovf/OvfOvaReader.java#L220>
> >     >>
> >     >>
> >     >>
> >     >>     >     file
> >     >>     >
> >     >>
> >       /var/log/ovirt-engine/ova/ovirt-query-ova-ansible-
> 20180220123504-ovirt01.net
> >     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net>
> >     >>     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net
> >     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net>>
> >     >>     >
> >      <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net
> >     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net>
> >     >>     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net
> >     <http://ovirt-query-ova-ansible-20180220123504-ovirt01.net>>>
> >     >>     >     in the fact does not exists (nor folder
> >     /var/log/ovirt-engine/ova/)
> >     >>     >
> >     >>     >
> >     >>     > This issue is also resolved in 4.2.2.
> >     >>     > In the meantime, please create the
> >      /var/log/ovirt-engine/ova/ folder
> >     >>     > manually and make sure its permissions match the ones of
> >     the other
> >     >>     > folders in  /var/log/ovirt-engine.
> >     >>
> >     >>     ok, done. After another try there is this log file
> >     >>
> >     >>
> >      /var/log/ovirt-engine/ova/ovirt-query-ova-ansible-
> 20180220173005-ovirt01.net
> >     <http://ovirt-query-ova-ansible-20180220173005-ovirt01.net>
> >     >>     <http://20180220173005-ovirt01.net
> >     <http://20180220173005-ovirt01.net>>.slu.cz.log
> >     >>
> >     >>     https://pastebin.com/M5J44qur
> >     >>
> >     >>
> >     >> Is it the log of the execution of the ansible playbook that was
> >     provided
> >     >> with a path to the /ova folder?
> >     >> I'm interested in that in order to see how comes that its
> execution
> >     >> never completed.
> >     >
> >     > well, I dont think so, it is log from import with full path to ova
> >     file
> >     >
> >     >
> >     >
> >     >>
> >     >>
> >     >>
> >     >>
> >     >>     >     Cheers,
> >     >>     >
> >     >>     >     Jiri Slezka
> >     >>     >
> >     >>     >     >
> >     >>     >     >
> >     >>     >     >
> >     >>     >     >     I am using latest 4.2.1.7-1.el7.centos version
> >     >>     >     >
> >     >>     >     >     Cheers,
> >     >>     >     >     Jiri Slezka
> >     >>     >     >
> >     >>     >     >
> >     >>     >     >     [1] https://haas.cesnet.cz/#!index.md
> >     <https://haas.cesnet.cz/#!index.md>
> >     >>     <https://haas.cesnet.cz/#!index.md
> >     <https://haas.cesnet.cz/#!index.md>>
> >     >>     <https://haas.cesnet.cz/#!index.md
> >     <https://haas.cesnet.cz/#!index.md>
> >     <https://haas.cesnet.cz/#!index.md <https://haas.cesnet.cz/#!
> index.md>>>
> >     >>     >     >     <https://haas.cesnet.cz/#!index.md
> >     <https://haas.cesnet.cz/#!index.md>
> >     <https://haas.cesnet.cz/#!index.md <https://haas.cesnet.cz/#!
> index.md>>
> >     >>     >     <https://haas.cesnet.cz/#!index.md
> >     <https://haas.cesnet.cz/#!index.md>
> >     >>     <https://haas.cesnet.cz/#!index.md
> >     <https://haas.cesnet.cz/#!index.md>>>> - Cesnet HAAS
> >     >>     >     >     [2] https://haas.cesnet.cz/downloads/release-01/
> >     <https://haas.cesnet.cz/downloads/release-01/>
> >     >>     <https://haas.cesnet.cz/downloads/release-01/
> >     <https://haas.cesnet.cz/downloads/release-01/>>
> >     >>     >     <https://haas.cesnet.cz/downloads/release-01/
> >     <https://haas.cesnet.cz/downloads/release-01/>
> >     >>     <https://haas.cesnet.cz/downloads/release-01/
> >     <https://haas.cesnet.cz/downloads/release-01/>>>
> >     >>     >     >     <https://haas.cesnet.cz/downloads/release-01/
> >     <https://haas.cesnet.cz/downloads/release-01/>
> >     >>     <https://haas.cesnet.cz/downloads/release-01/
> >     <https://haas.cesnet.cz/downloads/release-01/>>
> >     >>     >     <https://haas.cesnet.cz/downloads/release-01/
> >     <https://haas.cesnet.cz/downloads/release-01/>
> >     >>     <https://haas.cesnet.cz/downloads/release-01/
> >     <https://haas.cesnet.cz/downloads/release-01/>>>> - Image repository
> >     >>     >     >
> >     >>     >     >
> >     >>     >     >     _______________________________________________
> >     >>     >     >     Users mailing list
> >     >>     >     >     Users@ovirt.org <mailto:Users@ovirt.org>
> >     <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
> >     <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
> >     >>     <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>
> >     >>     >     <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
> >     <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
> >     >>     <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
> >     <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>>
> >     >>     >     >     http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>
> >     >>     <http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>>
> >     >>     >     <http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>
> >     >>     <http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>>>
> >     >>     >     >     <http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>
> >     >>     <http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>>
> >     >>     >     <http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>
> >     >>     <http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>>>>
> >     >>     >     >
> >     >>     >     >
> >     >>     >
> >     >>     >
> >     >>     >
> >     >>     >     _______________________________________________
> >     >>     >     Users mailing list
> >     >>     >     Users@ovirt.org <mailto:Users@ovirt.org>
> >     <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
> >     >>     <mailto:Users@ovirt.org <mailto:Users@ovirt.org>
> >     <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>>
> >     >>     >     http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>
> >     >>     <http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>>
> >     >>     >     <http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>
> >     >>     <http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>>>
> >     >>     >
> >     >>     >
> >     >>
> >     >>
> >     >>
> >     >>     _______________________________________________
> >     >>     Users mailing list
> >     >>     Users@ovirt.org <mailto:Users@ovirt.org>
> >     <mailto:Users@ovirt.org <mailto:Users@ovirt.org>>
> >     >>     http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>
> >     >>     <http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>>
> >     >>
> >     >>
> >     >
> >     >
> >     >
> >     >
> >     > _______________________________________________
> >     > Users mailing list
> >     > Users@ovirt.org <mailto:Users@ovirt.org>
> >     > http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>
> >     >
> >
> >
> >
> >     _______________________________________________
> >     Users mailing list
> >     Users@ovirt.org <mailto:Users@ovirt.org>
> >     http://lists.ovirt.org/mailman/listinfo/users
> >     <http://lists.ovirt.org/mailman/listinfo/users>
> >
> >
>
>
>
> _______________________________________________
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Reply via email to