To monitoring the network interfaces, I have a script that check if
ifAdminStatus and ifOperStatus values matches in snmp.
But with oVirt it fails on a server with 4 physical interfaces, but only two
connected, and return an error:
snmptable XXX IF-MIB::ifTable | less
SNMP table: IF-MIB::ifTable
ifIndex ifDescr ifAdminStatus ifOperStatus
1 lo up up
2 eth0 up up
3 eth1 up up
4 eth2 up down
5 eth3 up down
24 ;vdsmdummy; down down
25 vnet0 up up
And indeed on the server:
ip link show eth2
4: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode
DEFAULT group default qlen 1000
link/ether 40:a8:f0:30:81:1a brd ff:ff:ff:ff:ff:ff
It's up, but I don't configured it on oVirt, removed ifcg-eth2. Is there a way
to disable it ?
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/EPEBBNM3MACG5SPKGPZIHXERWRWB6MHE/