Would you please share the vdsm.log and the supervdsm.log from this host? On Wed, 22 Aug 2018 11:36:09 -0400 Douglas Duckworth <[email protected]> wrote:
> Hi > > I keep losing ib0 connection on hypervisor after adding host to > engine. This makes the host not really work since NFS will be mounted > over ib0. > > I don't really understand why this occurs. > > OS: > > [root@ovirt-hv2 ~]# cat /etc/redhat-release > CentOS Linux release 7.5.1804 (Core) > > Here's the network script: > > [root@ovirt-hv2 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ib0 > DEVICE=ib0 > BOOTPROTO=static > IPADDR=172.16.0.207 > NETMASK=255.255.255.0 > ONBOOT=yes > ZONE=public > > When I try "ifup" > > [root@ovirt-hv2 ~]# ifup ib0 > Error: Connection activation failed: No suitable device found for this > connection. > > The error in syslog: > > Aug 22 11:31:50 ovirt-hv2 kernel: IPv4: martian source 172.16.0.87 > from 172.16.0.49, on dev ib0 > Aug 22 11:31:53 ovirt-hv2 NetworkManager[1070]: <info> > [1534951913.7486] audit: op="connection-activate" > uuid="2ab4abde-b8a5-6cbc-19b1-2bfb193e4e89" name="System ib0" > result="fail" reason="No suitable device found for this connection. > > As you can see media state up: > > [root@ovirt-hv2 ~]# ip a > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > group default qlen 1000 > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > valid_lft forever preferred_lft forever > 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master > ovirtmgmt state UP group default qlen 1000 > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff > 3: em2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state > DOWN group default qlen 1000 > link/ether 50:9a:4c:89:d3:82 brd ff:ff:ff:ff:ff:ff > 4: p1p1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state > DOWN group default qlen 1000 > link/ether b4:96:91:13:ea:68 brd ff:ff:ff:ff:ff:ff > 5: p1p2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state > DOWN group default qlen 1000 > link/ether b4:96:91:13:ea:6a brd ff:ff:ff:ff:ff:ff > 6: idrac: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast > state UNKNOWN group default qlen 1000 > link/ether 50:9a:4c:89:d3:84 brd ff:ff:ff:ff:ff:ff > inet 169.254.0.2/16 brd 169.254.255.255 scope global idrac > valid_lft forever preferred_lft forever > 7: ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc mq state UP > group default qlen 256 > link/infiniband > a0:00:02:08:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:1d:13:41 brd > 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff > 8: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > group default qlen 1000 > link/ether 12:b4:30:22:39:5b brd ff:ff:ff:ff:ff:ff > 9: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group > default qlen 1000 > link/ether 3e:32:e6:66:98:49 brd ff:ff:ff:ff:ff:ff > 25: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc > noqueue state UP group default qlen 1000 > link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff > inet 10.0.0.183/16 brd 10.0.255.255 scope global ovirtmgmt > valid_lft forever preferred_lft forever > 26: genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65000 qdisc > noqueue master ovs-system state UNKNOWN group default qlen 1000 > link/ether aa:32:82:1b:01:d9 brd ff:ff:ff:ff:ff:ff > 27: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > group default qlen 1000 > link/ether 32:ff:5d:b8:c2:b4 brd ff:ff:ff:ff:ff:ff > > The card is FDR: > > [root@ovirt-hv2 ~]# lspci -v | grep Mellanox > 01:00.0 Network controller: Mellanox Technologies MT27500 Family > [ConnectX-3] > Subsystem: Mellanox Technologies Device 0051 > > Latest OFED driver: > > [root@ovirt-hv2 ~]# /etc/init.d/openibd status > > HCA driver loaded > > Configured IPoIB devices: > ib0 > > Currently active IPoIB devices: > ib0 > Configured Mellanox EN devices: > > Currently active Mellanox devices: > ib0 > > The following OFED modules are loaded: > > rdma_ucm > rdma_cm > ib_ipoib > mlx4_core > mlx4_ib > mlx4_en > mlx5_core > mlx5_ib > ib_uverbs > ib_umad > ib_ucm > ib_cm > ib_core > mlxfw > mlx5_fpga_tools > > I can add an IP to ib0 using "ip addr" though I need Network Manager > to work with ib0. > > > Thanks, > > Douglas Duckworth, MSc, LFCS > HPC System Administrator > Scientific Computing Unit > Weill Cornell Medicine > 1300 York - LC-502 > E: [email protected] > O: 212-746-6305 > F: 212-746-8690 _______________________________________________ Users mailing list -- [email protected] To unsubscribe send an email to [email protected] Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/[email protected]/message/VQLZ6YQSGNFZSTLHQVKZAXQ2EYVKM7XY/
